KSCdirect

Product Data

KSCdirect Part #: HON SV9541Q2561/U
Description: 24v 1/2" X 1/2" Two Stage Intermittent Hot Sur
MFG Part #: SV9541Q2561
UPC: 85267297677
Supplier: Approved Supplier
Usually ships in 8 days.
You will be notified of any delay and may cancel at that time.

Your Price: $470.95 / EA

QTY:  
For shipping rates, add item to cart.
* Quantity discounts may be available. Call Kelly Supply at 800-918-8939.
Alternatively, you may e-mail info@kscdirect.com for service.

Details


Residential Comfort/Combustion : Combustion Controls : Gas Valves, Residential : SmartValve : Intermittent Pilot with air control : SV9541Q2561/U

Intermittent Pilot with Comb Air Control. SmartValve. Two-Stage. Standard Opening. 1/2 x 1/2.

Overview

The SmartValve System Controls combine gas flow control and electronic intermittent pilot sequencing functions into a single unit. The Q3450 or Q3480 Pilot hardware supplies the low voltage igniter, flame sensor and pilot burner. These ignition system controls provide all gas ignition safety functions by controlling gas flow, ignition source, and a 120 Vac or 240 Vac combustion air blower. The controls also monitor the appliance airflow proving switch and limit string to assure proper appliance operation, and provide prepurge, postpurge, and timed trial for pilot ignition with 100 percent shutoff and continuous retry. Includes a diagnostic LED indicates system status.

Features

  • These controls communicate directly with an electronic fan timer (ST9160 Electronic Fan Timer for single stage applications; ST9162 Electronic Fan Timer for two-stage applications) in typical forced warm air furnace applications.
  • It can directly interface with the appropriate power supplies and a system thermostat for additional appliance applications.
  • When controlled directly by a thermostat, these controls do not provide a postpurge function, because power to the control is removed when the thermostat call for heat ends.
  • The Systems are suitable for a wide range of fan-assisted combustion gas-fired appliances including furnaces, rooftop furnaces, boilers, unit heaters, infrared heaters, water heaters and commercial cooking appliances.

Product Specifications

Dimensions (in.)
3.2 in. wide x 4.9 in. high x 4.1 in.long
Dimensions (mm)
81 mm wide x124 mm high x 104 mm long.
Includes
LP Conversion Kit
Mounting
0 to 90 degrees in any direction from the upright position of the gas control knob, including vertically.
Electrical Ratings
24 Vac
Frequency
60 Hz
Approvals, CSA
CSA International: 112395
Tradeline Value
Universal
Voltage
Flame Failure Response Time (sec)
1.6 sec @ 3 A
PrePurge
15 seconds
PostPurge
30 seconds
Ambient Temperature Range (F)
-40 F to +175 F
Ambient Temperature Range (C)
-40 C to +79 C
Ignition System Type
Intermittent Hot Surface Pilot Ignition
Ignition Sequence
Intermittent Pilot
Type of Gas
Natural
Flame Sense
HSI
Ignition Source
Pilot
Ignition Trials To Lockout
continuous retry
Ignition Trial Time (sec)
90 sec
Typical Ignition Hardware
Q3450; Q3480
Body Pattern
Straight-through
Opening Characteristics
Standard Opening 2-stage
Pressure Regulator Setting (psi)
1.7 in. WC low; 3.2 in. WC high
Pressure Regulator Setting (kPa)
0.42 kPa low; 0.80 kPa high
Pressure Ratings (psi)
1/2 psi
Pressure Ratings (kPa)
3.5 kPa
Inlet/Outlet Size (in.)
1/2 in. NPT x 1/2 in. NPT
Pilot Gas Outlet
Yes
Capacity (ft/hr)
Maximum at 1 in. P.D.--150 ft/hr; Maximum--200 ft/hr; Minimum--20 ft/hr
Capacity (m/hr)
Maximum at 1 in. P.D.--4.2 m/hr; Maximum--5.7 m/hr; Minimum--0.6 m/hr
Pressure Tapping
1/8 in. - NPT

Attributes/Specifications

Category Residential Comfort/Combustion
Manufacturer Approved Supplier
Product Combustion Controls
Style Combustion Controls

Supplemental Files

This item has no supplemental files.