Distributor
Environmental & Combustion Controls
> Foot-Mounted Motors > M6284-S
M6284D4004-S
24V Non-Spring Return Foot Mounted Actuator with 150 lb-in. torque
non-linear feedback, for slaving applications only
Locate Distributors
Product Specifications Literature and
Documents
Overview
These Series 62 Modutrol IV(TM) Motors non-spring return floating
control motors are used with controllers that provide a switched spdt
or floating output to operate dampers or valves. These motors also
have an internal electrically isolated feedback potentiometer that
provides indication of the motor shaft position some models can be
used for slaving Series 90 Motors.
Features
o Integral junction box provides NEMA 3 weather protection if motor
is mounted in the upright position.
o Motor and circuitry operate from 24 Vac.
o Quick-connect terminals are standard--screw terminal adapter is
available.
o Adapter bracket for matching shaft height of older motors is
available.
o Motors have field adjustable stroke (90 to 160 degrees).
o Integral auxiliary switches are available factory mounted, or can
be field added.
o All models have dual shafts (slotted and tapped on both ends).
o All models have auxiliary switch cams.
o Fixed torque throughout the entire voltage range.
o Motors are designed for either normally open or normally closed
valves and dampers.
o Include electrically isolated feedback potentiometer that provides
shaft position indication.
o -S models with non-linear feedback are for slaving applications
only.
Product Specifications Back To Top
Description Modutrol IV(TM) Motor non-linear feedback, for slaving
applications only
Application Type Electric
Internal Auxiliary Switch 0
Fail Safe Mode Non-Spring Return
Control Signal Floating
Feedback Yes
Motor shaft Dual-ended shaft
Stroke Adjustable; 90 to 160 degrees, Symmetrical
Torque Rating (lb-in.) 150 lb-in.
Torque Rating (Nm) 17 Nm
External Auxiliary Switches Available Yes
Voltage 24V
Frequency 60 Hz
Frequency 50 Hz
Power Consumption Driving (VA) 15 VA
Electrical Connections Quick-connect terminals
Shaft Dimensions (in.) 0.375 in.
Shaft Dimensions (mm) 10 mm
Shaft Shape square
Mounting Foot-mounted
Weight (lb) 6.5 lb
Dimensions (in.) 6 7/16 in. high x 5 1/2 in. wide x 7 5/16 in. deep
Dimensions (mm) 164 mm high x 140 mm wide x 185 mm deep
Temperature Range, Ambient (F) -40 F to +150 F
Temperature Range, Ambient (C) -40 C to +60 C
Deadweight Load on Shaft (Either End) (lb) 200 lbs.
Deadweight Load (Combined on both Shafts) 300 lbs.
Nominal Timing (sec) 30-60 sec
Shaft Rotation (upon control signal increase) Dependent on wiring
(normally closed)
Auxiliary Switch Ratings AFL - 120 Vac 7.2 A
Auxiliary Switch Ratings AFL - 240 Vac 3.6 A
Auxiliary Switch Ratings ALR- 120 Vac 43.2A
Auxiliary Switch Ratings ALR- 240 Vac 21.6 A
Approvals, Underwriters Laboratories Inc Listed File: E4436, Guide:
XAPX
Approvals, Canadian Standards Association Certified: File No. LR1620,
Guide No. 400-E
Approvals, CE EN55011 (Emission) EN50082-2 (Immunity) 73/23/EEC (LVD)
Comments non-linear feedback, for slaving applications only
Tradeline Value Tradeline
Literature and other Resources Download
Back To Top
Product Data - (M6184, M6194, M6282, M6284, M6285, M6294 Series 61and
Series 62 Modutrol IV Motors)
Product Data - (M6194D, M6284D, M6285A Servomoteurs Modutrol IV Series
61 et 62 - French)
Product Data - (M6185D, M6161A, M6174A, M6181A, M6181F, M6182F,
M6184A, M6184B, M6184D, M6184F, M6191, M6194, M6281, M6282, M6284,
M6285, M6286, M6294 Series 61 and Series 62 Modutrol IV Motors)
Addendum - (M4182, M4185, M4186, M6181, M6184, M6191, M6194, M6281,
M6282, M6284, M6285, M6286, M6291, M6294, M8175, M8182, M8185, M9182,
M9183, M9184, M9186, M9481, M9484, M9491, M9494 Modutrol IV
Motors-English/French)
Specification Data - (M6281, M6284, M6294 Modutrol IV Motors)
Installation Instructions - (4074EQG Shunt Resistors For M6284D1000;
M6284D1004; M6294D1008 Motors-Modutrol IV)
Download -Submit
Welcome
Category: SUPPLIER DIRECTORY => HONEYWELL, INC
February 2009
> Foot-Mounted Motors > M6284-S
Commercial Building Controls : Dampers and Damper Actuators : Foot-Mounted Motors : Non-Spring Return Foot Mounted Actuators : Floating or SPDT NSR Low Voltage : M6284D4004-S/U
150 lb-in, NSR, Floating with non-linear feedback for slaving Series 90, 24V
