Commercial Building Controls : Variable Frequency Drives : SmartVFD HVAC : SmartVFD Drives : HVFDSD3A0500G100/U
SmartVFD HVAC, 208/230Vac, 50 HP, Graphical, NEMA 1 Enclosure, Drive Alone
Overview
The Honeywell SmartVFD HVAC and BYPASS are designed for commercial buildings to deliver the energy savings that building owners and managers need. Efficient install, and commissioning, in a full featured VFD.
Features
- Start-up WizardsAll you have to do is tell the VFD whether you have a pump or a fan, enter nominal motor information, and you are up and running.
- Graphic InterfaceThe easy-to-use keypad and interface deliver menu-driven programming and monitoring for fast, uniform commissioning. It's also easy for the building owner or manager to learn and use, helping to reduce service calls. Plus, a manual is built into the keypad for easy access when needed.
- Built-in CommunicationsWith BACnet, N2 and Modbus built in, your customers will enjoy a lower total installed cost and reliable communications with the building management system.
- PC Software WizardsCommissioning, programming and troubleshooting are all a snap thanks to these guided Startup and PID wizards.
- Built-in PLCAnother reason why SmartVFD HVAC is a great value for your customer, the built-in PLC eliminates the need for an expensive external controller.
- DC Choke for harmonic protection.
- Standard RIF FilterEnsures that EMC/RFI requirements are met.
- Bypass OptionsMeets specifications and system critical applications with a comprehensive bypass offering.
- Real-Time ClockBattery included.
- Fire Mode for safe operation.
- Motor Switch Ride-Through--easy, fault-free maintenance.
Product Specifications
- Dimensions (in.)
- 11.4 x 38 x 13.5
- Dimensions (mm)
- 289.56 x 965.2 x 342.9
- Weight (lb)
- 154.3 Ib
- Weight (kg)
- 70.0 Kg
- Item Type
- Product
- Frequency
- 0 Hz to 320 Hz
- Voltage
- 208 Vac; 230 Vac
- Operating Temperature Range (F)
- 14 F to 122 F
- Operating Temperature Range (C)
- -10 C to 50 C
- Enclosure
- NEMA 1
- Relay Outputs
- Max. switching load: 250Vac/2A or 250Vdc/0,4A
- Horsepower
- 50 HP
- Current Ratings
- 140 A
- Analog Current Output
- 0 (4) - 20 mA, max 500 ohm
- Bypass
- Drive alone
- Auto Bypass
- No
- Drive Family
- SmartVFD HVAC
- Drive Input Disconnect
- No
- Type of RFI Filter
- EMC Filter
- Continuous Output Current
- overload 1.5 x High overload current (1min/10min); overload 1.1 x Low overload current (1min/10min)
- Starting Torque
- Depends on the Motor
- Acceleration time
- 0.1 - 3000 sec
- Deceleration time
- .1 - 3000 sec
- Analog Voltage Input
- 0 - 10 Vdc , 200K ohm
- Analog Current Input
- 0 (4) - 20 mA, 250 ohm differential
- Digital Output
- Open collector, max. load 48V/50mA
- Reference Output Voltage
- Maximum Load 10mA
- Auxiliary Voltage
- 20%, max. load 50 mA
- Frame Type
- 8
