Commercial Building Controls : Variable Frequency Drives : SmartVFD HVAC : SmartVFD Drives : HVFDSD3A0015G300/U
SmartVFD HVAC, 208/230Vac, 1.5 HP, NEMA 3R Enclosure, Drive Alone
Overview
The Honeywell SmartVFD HVAC and BYPASS are designed for commercial buildings to deliver the energy savings that building owners and managers need. Efficient install, and commissioning, in a full featured VFD.
Features
- Start-up WizardsAll you have to do is tell the VFD whether you have a pump or a fan, enter nominal motor information, and you are up and running.
- Graphic InterfaceThe easy-to-use keypad and interface deliver menu-driven programming and monitoring for fast, uniform commissioning. It's also easy for the building owner or manager to learn and use, helping to reduce service calls. Plus, a manual is built into the keypad for easy access when needed.
- Built-in CommunicationsWith BACnet, N2 and Modbus built in, your customers will enjoy a lower total installed cost and reliable communications with the building management system.
- PC Software WizardsCommissioning, programming and troubleshooting are all a snap thanks to these guided Startup and PID wizards.
- Built-in PLCAnother reason why SmartVFD HVAC is a great value for your customer, the built-in PLC eliminates the need for an expensive external controller.
- DC Choke for harmonic protection.
- Standard RIF FilterEnsures that EMC/RFI requirements are met.
- Bypass OptionsMeets specifications and system critical applications with a comprehensive bypass offering.
- Real-Time ClockBattery included.
- Fire Mode for safe operation.
- Motor Switch Ride-Through--easy, fault-free maintenance.
Product Specifications
- Dimensions (in.)
- Contact Customer Care
- Dimensions (mm)
- Contact Customer Care
- Weight (lb)
- Contact Customer Care
- Weight (kg)
- Contact Customer Care
- Item Type
- Product
- Frequency
- 0 Hz to 320 Hz
- Voltage
- 208 Vac; 230 Vac
- Operating Temperature Range (F)
- 14 F to 122 F
- Operating Temperature Range (C)
- -10 C to 50 C
- Enclosure
- NEMA 3R
- Relay Outputs
- Max. switching load: 250Vac/2A or 250Vdc/0,4A
- Horsepower
- 1.5 HP
- Current Ratings
- 6.6A
- Analog Current Output
- 0 (4) - 20 mA, max 500 ohm
- Bypass
- Drive alone
- Auto Bypass
- No
- Drive Family
- SmartVFD HVAC
- Drive Input Disconnect
- No
- Type of RFI Filter
- EMC Filter
- Continuous Output Current
- overload 1.5 x High overload current (1min/10min); overload 1.1 x Low overload current (1min/10min)
- Peak Current
- 2 x IN, 2 seconds every 20 second period
- Acceleration time
- 0.1 - 3000 sec
- Deceleration time
- .1 - 3000 sec
- Analog Voltage Input
- 0 - 10 Vdc , 200K ohm
- Analog Current Input
- 0 (4) - 20 mA, 250 ohm differential
- Digital Output
- Open collector, max. load 48V/50mA
- Reference Output Voltage
- Maximum Load 10mA
- Auxiliary Voltage
- 20%, max. load 50 mA
- Frame Type
- 4
