Hoffman Specialty float & thermostatic steam trap FT015H, 1-1/4" pipe size, 15 psi maximum steam operating pressure, condensate capacity 2,340 pounds per hour. Hoffman Specialty F&T traps (float and thermostatic traps) are recommended for modulating steam pressures where widlely varying loads are present, and pressures vary from maximum to vacuum. These steam traps vent air at very low pressures, handle start up air loads, operate against back pressure and provide continuous condensate drainage. The Hoffman series "H" float & thermostatic trap has inlets and outlets on both sides of the steam trap, this allows for more flexibility when piping-in the steam trap. You simply insert a pipe plug into the inlet/outlet you will not be using. Hoffman Specialty F&T traps are available in steam operating pressures at 15, 30, 75, 125 and 175 psi. The 1-1/4" FTO15H has a inlet to outlet width of 5-1/2" for in and out opposite side,or, same side inlet to outlet center-to-center dimension of 3", a height of 5-19/32" and a weight of 10lbs.

Alternate Part Number: HS_404220

Body Design Pressure Rating	250 psi
Manufacturer	HOFFMAN SPECIALTIES
Model No.	FT015H-5
Part No.	404220
Pressure	250 psi
Seal Differential Pressure Ratin	15 psi

This item has no supplemental files.