Hercules 35276 - 8 OZ CRYO-TEK INHIBITOR
For heating systems requiring freeze protection as well as corrosion preventive. Hercules
cryo-tek anti-freeze not only provides this protection, but with its exclusive triple protection inhibitor system, also protects against mineral deposits and mineral sedimentation. A blend of virgin propylene glycol and the triple protection inhibitor package,
cryo-tek is designed for use in hydronic heating and cooling closed-loop systems, most solar heating systems, snow melts, radiant heat and general plumbing systems. Use in systems fabricated with metal, plastics (except CPVC) and rubber piping, fittings, seals, and other parts. (Corrosion inhibitors are effective with most metals including steel, aluminum (up to 160 F) and copper. For those boilers with aluminum heat exchangers - see
cryo-tek -100/AL on next page.) Non-flammable, odorless, non-toxic, non-irritating, and compatible with Hercules boiler stop-leak and heating system cleaners. (Please note: Minimum flow protection levels are estimated and are dependent on system and equipment. Attempting to circulate fluid below freeze point may overload and/or cause pump failure. Check with system manufacturer for compatibility.)Liquid corrosion protection additive. Use to adjust pH of hydronic systems charged with
cryo-tek anti-freeze. One bottle will raise pH about one level per 20-gallon content.
Liquid corrosion protection additive. Use to adjust pH of hydronic systems charged with
cryo-tek anti-freeze. One bottle will raise pH about one level per 20-gallon content.
Specifications:• Size: 8 oz.
• Boiler Type: Only for boilers with no aluminum parts.
