Description
Driv-LokĀ® Groove Pin, Type G Imperial, 1/8 in Large End Dia, 0.123 in Small End Dia, 3/8 in Overall Length, Low Carbon Steel, Zinc Clear, 1600 lb Shear Strength
Features:
- The groove of a grooved pin is formed by a swaging operation in which three tools penetrate the nominal diameter of the metal at 120 deg intervals
- This penetration displaces a controlled amount of metal to each side of the grooving tool, forming a raised portion along the side of each groove
- Type G has three parallel half-length grooves including pilot
- It is a very versatile pin, suitable for use in both blind and through holes as a spring anchor pin
- The annular groove opposite the locking end is used to anchor the end loop of a tension spring
- If snap or retainer rings are to be used, special section annular grooves can be machined to order
Applications:
For use in both blind and through holes as a spring anchor pin
Standards/Approval:
- ASME B18.8.2
- RoHS Compliant
- PROP65: This product can potentially expose you to chemicals including lead, nickel and chromium which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov