Basin Wrenches provide access to faucet nuts that are sandwiched between the sink basin and wall. The wrench’s ratcheting head pivots up to 90 degrees to allow contact with the nut in even the tightest situations. The spring-loaded jaw mechanism provides one-handed ratcheting for effortless installation and removal. This item is equipped with a sliding t-handle to increase leverage and avoid contact with the wall or pipes.

• Total Length – 11”
• Jaw Capacity – 3/8” to 1-1/4”
• Head pivots up to 90 degrees
• Ratcheting jaws allow one-handed turning.
• Sliding t-handle for work in confined spaces.

Instructions:
The head of the basin wrench needs to be positioned in a specific angle for proper use. The grip strength of jaws is applied when the tool handle is turned toward the back of the jaws. The ratcheting feature occurs when the tool handle is turned toward the front of the jaws.

For removal of basin nuts, position the wrench head at a 90 degree angle and turn counterclockwise. You should be turning the tool toward the back of the jaws. If not, flip the head to the other side.

For installation of basin nuts, position the wrench head at a 90 degree angle and turn clockwise. You should be turning the tool toward the back of the jaws. If not, flip the head to the other side.

General Tool - General Tools & Instruments

Manufacturer	General Tools & Instruments

This item has no supplemental files.