Description

GlobalSpiral couplings are specially engineered to provide superior performance for extreme high-pressure, high-impulse spiral-wire hydraulic hose applications. They can be used with all Gates MegaSys four and six-spiral wire hose up to 6,000 psi. When used with 2-wire ferrules, GlobalSpiral couplings can also be crimped on Gates wire-braid hoses. The innovative, two-piece, no-skive design reduces assembly time, labor, fabrication errors and contamination of the fluid power system. S, M and L Drops per ISO Final Draft International Standard 12151-S.

Features:

• “Bite-the-wire” crimp for improved coupling retention.
• Tested to an industry-leading 1,000,000 impulse cycles.
• +250°F temperature capability for longer assembly life.
• Environmentally-friendly TuffCoat plating for 347 percent better corrosion resistance than the SAE Standard.

Angle	Not Applicable
C Cutoff_in	1.76
C Cutoff_mm	44.7
Coating	TuffCoat™
Configuration	Straight
End Size 1	12
End Type 1	FFORX
Fitting Type	O-Ring Face Seal
H1 Stem Hx_in	1.181
H1 Stem Hx_mm	30
H2 Nut Hx_in	1.417
H2 Nut Hx_mm	36
Hose Dash Size	10
Hose ID_in	0.626
Hose ID_mm	15.9
Hose Recommend	MegaSys Spiral Wire Hyd, select MegaSys Wire Braid
ISO 1	12151-1 Metric Hex
Manufacturer	Gates Corporation - Hydraulics

This item has no supplemental files.