Description

RECOMMENDED FOR: Transfer of water, petroleum–based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking. Transfer of refined fuels (commercial gasoline, diesel fuel) oils and other petroleum products. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Ideal for offshore/onshore dock hose transfer applications involving discharge service for diesel oils and other similar petroleum products where an extremely lightweight, flexible hose with a high rated working pressure and a small minimum bend radius is required. For Bio–Diesel and other alternative fuel applications, see Fuel Master™ XTreme™. Petroleum transfer hoses may be used with all grades of Bio–Diesel only if the exposure is intermittent and the hose is drained between uses.

Features:

• CAUTION: Do not convey fuels over +120°F (+49°C).
• UltraBrasion™ designed with Yellow Carboxylated Nitrile (Type C4) Wear Indicator Layer.
• ARPM (Class A) High oil–resistant tube.

Coupling Recommendation1	14 Interlocking, Ground Joint
Coupling Recommendation10	No recommendation available
Coupling Recommendation2	15 Interlocking, Washer Joint
Coupling Recommendation3	71 Permanent Swaged or Crimped
Coupling Recommendation4	No recommendation available
Coupling Recommendation5	No recommendation available
Coupling Recommendation6	No recommendation available
Coupling Recommendation7	No recommendation available
Coupling Recommendation8	No recommendation available
Coupling Recommendation9	No recommendation available
Cover Characteristic	Wrapped
Cover Color	Black
Cover Material	Chloroprene - Type A
Cover Type	Standard
Hose ID (in)	3 in
Hose ID (mm)	76.2 mm
Hose OD (in)	3.67 in
Manufacturer	GATES CORPORATION : HOSE

This item has no supplemental files.