Category:
[0] => SUPPLIER DIRECTORY => FLEXCO : FLEXIBLE STEEL LACING CO => FLEXCO BELTING LACING PARTS PRODUCTS SECTION 0

RBP1 Belt Positioner™ The RBP1 Belt Positioner™ is the simple, reliable solution for problem belts that continuously mistrack to one side of the conveyor. The Belt Positioner works on the return side belt using simple angled rollers mounted in a fixed position to quickly and continuously funnel the belt into the correct path. The RBP1 Belt Positioner’s innovative design does not rely on a pivoting mechanism to move and steer a wandering belt like conventional tracking units. The RBP1’s two idler rollers are adjusted to the belt and create a funneling action that continuously "positions" the belt into the correct path. Many times in as few as 5 revolutions of the belt the results can be seen. Plus, the idler rollers on the RBP1 make smooth contact with the return side belt’s bottom cover and not on the belt’s edges which can cause excessive wear and damage to the belt. Installed before the tail pulley, the Belt Positioner keeps the belt centered at its critical loading point. The RBP1 can also be used at the head pulley, before or after the take-up pulley or anywhere on the return beltline where there is a belt tracking problem. It can also be used on reversing belts. The RBP1 Belt Positioner comes assembled and ready to install. Simply preset the unit for the conveyor structure width, position the unit on the belt and bolt or weld in place. Adjust the rollers to the belt and watch the results. Product Literature Installation Instructions Replacement Parts Selection Guide Chart Rockline® RBP1 Belt Positioner Flexco® VP™ Flexco® Bolt Solid Plate

Keywords: Flexco - Flexible Steel Lacing 74565

Manufacturer	Flexco

This item has no supplemental files.