The Alligator Ready Set Staple, featuring one-piece fastener strips with pre-inserted staples, reduces installation time by eliminating the need to handle and load individual staples. The result is a strong splice that resists impact damage, as well as a smooth, unrippled joint that simplifies hinge pin insertion.

Staples penetrate between carcass fibers without severing them. Staples are hammer-driven through the belt and then clinched crosswise to prevent belt tension from pulling against – and unclinching – the staples.

Designed for belts from 1/16 (1.5mm) to 1/4 (6.4mm), Alligator Ready Set installation requires only a hammer and a lightweight installation tool that can be easily carried to and from the job site. Plus, the new Quad Staple Driver™ allows for the installation of four staples at one time, cutting installation time by 50%.

Choose the material that matches your application. Steel: Standard fastener material is suitable for most applications. Plated for rust and corrosion resistance. Stainless Steel: Type 316 provides extra resistance to abrasion, magnetic attraction, and corrosion from acids and chemicals. Also excellent for high-sanitary requirements. MegAlloy: Superior resistance to wear and abrasion, providing several times the service life of steel. Not recommended where subject to impact or corrosion. Magnetic Stainless Type 430: For use with magnetic separators, and provides resistance to wear and abrasion. Plate, staples and hinge pins are all constructed from magnetic stainless steel.

Category:
[0] => SUPPLIER DIRECTORY => FLEXCO : FLEXIBLE STEEL LACING CO => FLEXCO BELTING LACING PARTS PRODUCTS SECTION 5

Alligator® Ready Set™ Staple The Alligator® Ready Set™ Staple, featuring one-piece fastener strips with pre-inserted staples, reduces installation time by eliminating the need to handle and load individual staples. The result is a strong splice that resists impact damage, as well as a smooth, unrippled joint that simplifies hinge pin insertion. Refer to Selection Chart to find the right fastener Designed for belts from 1/16" (1.5mm) to 1/4" (6.4mm), Alligator Ready Set installation requires only a hammer and a lightweight installation tool that can be easily carried to and from the job site. Plus, the new Quad Staple Driver™ allows for the installation of four staples at one time, cutting installation time by 50%. Choose the material that matches your application. Steel: Standard fastener material is suitable for most applications. Plated for rust and corrosion resistance. Stainless Steel: Type 316 provides extra resistance to abrasion, magnetic attraction, and corrosion from acids and chemicals. Also excellent for high-sanitary requirements. MegAlloy®: Superior resistance to wear and abrasion, providing several times the service life of steel. Not recommended where subject to impact or corrosion. Magnetic Stainless Type 430: For use with magnetic separators, and provides resistance to wear and abrasion. Plate, staples and hinge pins are all constructed from magnetic stainless steel. Product Literature Installation Instructions Application Stories Technical Tips Selection Guide Chart Alligator® Ready Set™ Staple Fastener System Presentation(805K) Note: Flexco Company Overview Belt Preparation and Fastener Selection Recommended Belt Squaring Procedures Alligator® Ready Set™ Staple Fastener Installation Light Duty Fastener Selection Tool Alligator® RSC187 Installation Tool Alligator® Ready-Set™ Tool Kit Staple Setting Plate Alligator® Hinge Pin Cutter Hinge Pin Retaining Washers Rough-Top Belt Skiver Ready Set™ Staple Guide Blocks Quad Staple Driver™ Tatch-A-Cleat® Model L Tatch-A-Cleat® Model HD Tatch-A-Cleat® Econo-Cleat® Tatch-A-Lug® Tatch-A-Peg™ Tatch-A-Guide®

Keywords: Flexco - Flexible Steel Lacing 54552

Manufacturer	Flexco

This item has no supplemental files.