Designed as a compression fastener, Bolt Hinged is fastened to the belt ends with high tensile strength bolts. These compress the plates in the belt cover. Additional holding capability is provided by the fastener teeth that inbed in the belt without damage to the belt carcass. So splice tension is distributed across the entire plate width and teeth secure the fastener to resist pull-out.
Hinged construction makes Bolt Hinged fasteners ideal for applications requiring frequent belt-length alterations, the joint can be separated simply by removing the hinge pin. A variety of hinge pins are available to match your application.
On-site installation requires only portable hand or power tools. A specially designed templet and boring tool or belt punch quickly and accurately punches bolt holes into belts. Installation is also simplified by our exclusive piloted bolt. Tapered bolt tips cradle nuts securely in place and eliminate the need to twist nuts onto bolts by hand during installation set-up.
Keywords: FLEXST FLE 40007 40007 FLEXIBLE STEEL LACING CO 697598400079 375XJ30NC FLEXCO HINGED BELT FASTENERS
Category: [0] => BEARINGS AND POWER TRANSMISSION => LACING => FASTENERS
[1] => SUPPLIER DIRECTORY => FLEXCO : FLEXIBLE STEEL LACING CO => FLEXCO BELTING LACING PARTS PRODUCTS SECTION 36 => BEARINGS AND POWER TRANSMISSION => LACING => FASTENERS
Kelly Legacy Part Number: 3740007
Flexco® Bolt Hinged For belts operating over smaller pulleys – such as in construction equipment and road machinery – Flexco® Bolt Hinged fasteners are strong, dependable and easy-to-install.
Designed as a compression fastener, Bolt Hinged is fastened to the belt ends with high tensile strength bolts. These compress the plates in the belt cover. Additional holding capability is provided by the fastener teeth that inbed in the belt without damage to the belt carcass. So splice tension is distributed across the entire plate width and teeth secure the fastener to resist pull-out.
Hinged construction makes Bolt Hinged fasteners ideal for applications requiring frequent belt-length alterations, the joint can be separated simply by removing the hinge pin. A variety of hinge pins are available to match your application.
On-site installation requires only portable hand or power tools. A specially designed templet and boring tool or belt punch quickly and accurately punches bolt holes into belts. Installation is also simplified by our exclusive piloted bolt. Tapered bolt tips cradle nuts securely in place and eliminate the need to twist nuts onto bolts by hand during installation set-up.
Product Literature
Installation Instructions
Technical Tips
Selection Guide Chart
|
| Belt Preparation and Fastener Selection
|
| Recommended Belt Squaring Procedures
|
| Belt Skiving Using Flexco® FSK™ Skiver
|
|
|
|
|
|
Power & Hand Installation Tools
Bolt Breaker
Flexco-Lok® Tape
Flexco® Cracking Chisel
Curved Templets
Curved Belt Cutters
Flexco® Silicone Lubricant
|
|
|
| |
|
Keywords: Flexco - Flexible Steel Lacing 40007