| [Back] [Home] [Next] Studded Rod Ends SJNR / SJNL / AJNR
STEEL JAM NUTS AND ALUMINUM JAM NUTS | | | NOTE:
1. AVAILABLE ON ALL SERIES.
2. STUD MATERIAL: LOW CARBON STEEL AND ALLOY STEEL (HEAT TREATED) ZINC PLATED.
3. STUD MISALIGNMENT APPROX. +/-25 IN ANY DIRECTIONS.
4. TO SPECIFY RIGHT HAND STUD, ADD SUFFIX "Y" TO PART NUMBER.
EXAMPLE: CM6Y
5. TO SPECIFY LEFT HAND STUD, ADD SUFFIX "YL" TO PART NUMBER.
EXAMPLE: CM6YL
6. TO SPECIFY HEAT TREATED STUD, ADD SUFFIX "YX" TO PART NUMBER
EXAMPLE: CM6YX
7. FOR LOAD RATINGS WITH STUDS, PLEASE CONTACT F.K. ENGINEERING DEPARTMENT. | ROD END
PART
SIZE | L
LGTH. | P
LGTH. | S
LGTH | N
THD. | +.015
-.015 | REF. | MIN. | UNF
2A | | 3 | 1.016 | .500 | .437 | 10-32 | | 4 | 1.031 | .562 | .500 | 1/4-28 | | 5 | 1.219 | .687 | .593 | 5/16-24 | | 6 | 1.562 | .906 | .812 | 3/8-24 | | 7 | 1.750 | 1.062 | .937 | 7/16-20 | | 8 | 2.000 | 1.125 | 1.000 | 1/2-20 | | 10 | 2.500 | 1.500 | 1.375 | 5/8-18 | | 12 | 3.000 | 1.812 | 1.625 | 3/4-16 | |
| | SPECIAL PRODUCTS | Material
Steel-Low Carbon- Zinc Plated Aluminum
Notes:
1. Jam Nuts are sold in Lots of 25 pieces. | | Inch Steel Jam Nuts | Inch Aluminum Nuts | RIGHT
HAND | LEFT
HAND | THD.
SIZE | HEX
SIZE | RIGHT
HAND | LEFT
HAND | THD.
SIZE | HEX
SIZE | | SJNR03 | SJNL03 | 10-32 | 3/8 | AJNR03 | AJNL03 | 10-32 | 3/8 | | SJNR04 | SJNL04 | 1/4-28 | 7/16 | AJNR04 | AJNL04 | 1/4-28 | 7/16 | | SJNR05 | SJNL05 | 5/16-24 | 1/2 | AJNR05 | AJNL05 | 5/16-24 | 1/2 | | SJNR06 | SJNL06 | 3/8-24 | 9/16 | AJNR06 | AJNL06 | 3/8-24 | 9/16 | | SJNR07 | SJNL07 | 7/16-20 | 11/16 | AJNR07 | AJNL07 | 7/16-20 | 11/16 | | SJNR08 | SJNL08 | 1/2-20 | 3/4 | AJNR08 | AJNL08 | 1/2-20 | 3/4 | | SJNR10 | SJNL10 | 5/8-18 | 15/16 | AJNR10 | AJNL10 | 5/8-18 | 3/4 | | SJNR12 | SJNL12 | 3/4-16 | 1-1/8 | AJNR12 | AJNL12 | 3/4-16 | 1-1/8 | | *SJNR14 | *SJNL14 | 7/8-14 | 1-9/32 | | | | | | *SJNR16 | *SJNL16 | 1 1/4-12 | 1-13/16 | | | | | | *SJNR16-1 | *SJNL16-1 | 1-14 | 1-3/8 | | | | | | *SJNR16-2 | *SJNL16-2 | 1-12 | 1-3/8 | | | | | | | Metric Steel Jam Nuts | RIGHT
HAND | LEFT
HAND | THD.
SIZE | HEX
SIZE | | SJNR5M | SJNL5M | M5 X .08 | 3/8 | | SJNR6M | SJNL6M | M6 X 1.0 | 7/16 | | SJNR8M | SJNL8M | M8 X 1.25 | 1/2 | | SJNR10M | SJNL10M | M10 X 1.5 | 9/16 | | SJNR12M | SJNL12M | M12 X 1.75 | 11/16 | | SJNR14M | SJNL14M | M14 X 2.0 | 3/4 | | SJNR16M | SJNL16M | M16 X 2.0 | 15/16 | | SJNR18M | SJNL18M | M18 X 1.5 | 1 3/32 | | SJNR20M | SJNL20M | M20 X 1.5 | 1 3/32 |
| |
| | | *HEX SIZE MAY VARY DEPENDING ON AVAILABILITY OF MATERIAL | | |
Keywords: F.K. Bearings Rod Ends / End PTFE Liners Spherical Bearings / Bearing
