Description

Dodge® Pillow Block Roller Bearing Unit, Imperial, Series: 407, 4-7/16 in Bore, 13-1/4 to 13-3/4 in Bolt Center-to-Center Length, 4-3/4 in Base to Bore Centerline, 16.63 in Overall Length, 5.23 in Overall Width, 9.67 in Overall Height, Four-Bolt Base Mounting, Round Bore, 4.63 in Base Width, Set Screw Locking Device, Stamping Seal, Non-Expansion (Fixed) Expansion, 104000 lb Dynamic/132000 lb Static Load, 1325 rpm Maximum, Cast Iron, Uncoated

Features:

• Push pull adapter mount
• Grease limiting speeds 30% higher than set screw mounts
• Patented adapter mounting system
• Superior holding power reduces the fretting corrosion caused by vibration
• Seal/land on OD of inner ring maintains full contact pressure even when misaligned

Standards/Approval:

• UL Listed

Base to Bore Centerline	4-3/4 in
Base Width	4.63 in
Bolt Center-to-Center Length	13-1/4 to 13-3/4 in
Bore Diameter	4-7/16 in
Bore Type	Round
Expansion Type	Non-Expansion (Fixed)
Finish	Uncoated
Load Capacity	104000 lb Dynamic/132000 lb Static
Locking Device	Set Screw
Material	Cast Iron
Maximum Speed	1325 rpm
Mounting Type	Four-Bolt Base
Overall Height	9.67 in
Overall Length	16.63 in
Overall Width	5.23 in
Seal Type	Stamping
Series	407
Manufacturer	Baldor Reliance Electric