Description

Dodge® Pillow Block Plain Sleeve Bearing, Solidlube, Series: LM800, 1-1/2 in Bore, 3-1/2 in Bolt Center-to-Center Length, 1-5/16 in Base to Bore Centerline, 4-1/2 in Overall Length, 1-1/8 in Overall Width, 2-9/16 in Overall Height, Two-Bolt Base Mounting, Round Bore, 1-11/32 in Base Width, Unsealed Seal, Non-Expansion (Fixed), -40 to 800 deg F, 1600 rpm Maximum, Pressed Steel, Uncoated

Features:

• Self lubricating, statically self-aligning bearings for extreme industrial applications
• Good in temperature extremes and inaccessible locations
• Will function effectively in a vacuum
• Ideal where bearings are subject to dry cycles or where lube systems would be too costly
• Usable in many corrosive medias
• Will operate in submersible applications of some low viscosity liquids
• Recommended for slow speeds and limited shaft movement applications

Applications:

For high heat, cold temperatures, submersible, corrosive chemical media, slow speed and limited shaft movement applications

Base to Bore Centerline	1-5/16 in
Base Width	1-11/32 in
Bolt Center-to-Center Length	3-1/2 in
Bore Diameter	1-1/2 in
Bore Type	Round
Expansion Type	Non-Expansion (Fixed)
Finish	Uncoated
Material	Pressed Steel
Maximum Speed	1600 rpm
Mounting Type	Two-Bolt Base
Overall Height	2-9/16 in
Overall Length	4-1/2 in
Overall Width	1-1/8 in
Seal Type	Unsealed
Series	LM800
Temperature Rating	-40 to 800 deg F
Type	Solidlube
Manufacturer	Baldor Reliance Electric