Description

Dodge® Pillow Block Plain Sleeve Bearing, Solidlube, Series: 212, 2-7/16 in Bore, 6-7/8 to 7-15/16 in Bolt Center-to-Center Length, 2-3/4 in Base to Bore Centerline, 9-1/2 in Overall Length, 1-13/16 in Overall Width, 5-13/32 in Overall Height, Two-Bolt Base Mounting, 2-3/8 in Base Width, Non-Expansion (Fixed), 170 lb Load, -40 to 700 deg F, 700 rpm Maximum, Cast Iron, Powder Coated

Features:

• Good in temperature extremes and inaccessible locations
• Will function effectively in a vacuum
• Ideal where bearings are subject to dry cycles or where lube systems would be too costly
• Usable in many corrosive medias
• Will operate in submersible applications of some low viscosity liquids

Applications:

For slow speeds and limited shaft movement applications

Standards/Approval:

• UL Listed

Base to Bore Centerline	2-3/4 in
Base Width	2-3/8 in
Bolt Center-to-Center Length	6-7/8 to 7-15/16 in
Bore Diameter	2-7/16 in
Expansion Type	Non-Expansion (Fixed)
Finish	Powder Coated
Load Capacity	170 lb
Material	Cast Iron
Maximum Speed	700 rpm
Mounting Type	Two-Bolt Base
Overall Height	5-13/32 in
Overall Length	9-1/2 in
Overall Width	1-13/16 in
Series	212
Temperature Rating	-40 to 700 deg F
Type	Solidlube
Manufacturer	Baldor Reliance Electric