KSCdirect

Product Data

KSCdirect Part #: DIX WF3
Description: 3/8" Boss Washer Style Coupling Plated Steel
MFG Part #: WF3
UPC: 089109768967
Supplier: Dixon Valve & Coupling Co
Usually ships in 1-2 days.
You will be notified of any delay and may cancel at that time.

Your Price: $29.54 / EA

QTY:  
For shipping rates, add item to cart.
* Quantity discounts may be available. Call Kelly Supply at 800-918-8939.
Alternatively, you may e-mail info@kscdirect.com for service.

Details

Description

Dixon® Ground Joint Washer Seal Coupling, Series: Boss™, Coupling Fitting/Connector, 3/8 in Nominal, Hose Shank x FNPT End Style, 1-1/16 in Hex, Iron/Steel, Plated, 1-3/4 x 2-25/32 in Dimensions, Domestic

Features:

  • The spud part of the coupling serves as one half of the connection and is usually fixed to the equipment
  • The stem part that is clamped to the hose is the other half
  • The two halves are connected or disconnected by rotating the wing nut on the spud, when connected they achieve both a mechanical and a pressure seal
  • Easy to seal
  • Boss couplings supply a convenient threaded fitting to connect two lengths of hose, or a single length to a male or female threaded outlet
  • Use with Boss™ clamps
  • A Klingersil C-4401 washer is inserted between the stem and spud
  • Recommended for steam service up to 450 deg F
  • Worn-out hose couplings can be dangerous
  • They should be checked regularly and replace when necessary
  • Each coupling user should review applications and add safety devices where indicated
  • Note: pressurized steam is an extremely dangerous commodity
  • Only hose, fittings, clamps and accessory items that have been approved for steam service should ever be used! never use an unapproved item for steam service
  • Always follow the manufacturer's product recommendations for pressurized steam handling
  • Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
  • Do not use in connection with drinking water
  • Wash hands after handling

Applications:

Boss couplings are all-purpose hose couplings, universally recommended for steam hose connections. They are also widely used for air, water, fluid petroleum, chemicals and liquid petroleum gas up to 1 in ID | Boss couplings can be applied to many types of rubber, synthetic, plastic, metallic or semi-metallic hose

Attributes/Specifications

Dimensions 1-3/4 x 2-25/32 in
Domestic/Import Domestic
End Style Hose Shank x FNPT
Finish Plated
Fitting/Connector Type Coupling
Hex Size 1-1/16 in
Material Iron/Steel
Nominal Size 3/8 in
Series Boss™
Manufacturer Dixon Valve & Coupling Co