Dixon Valve TGR64
External Swage Stem Grooved End Standard
The Coupling System Requires No Bolts And Results In A Clean Coupling With No Protrusions.
The Holedall Coupling Provides Long-Lasting Efficiency And Safety.
Recommended For Use On Most One And Two Wire Braid Reinforced Hoses, Fiber Reinforced (Braided Or Spiraled) With Or Without Helical Wire Such As: Oil And Suction Discharge Hose, Barge And Dock Loading And Unloading Hose As Well As L.P. Gas Hose, Anhydrous
Designed For Hose Id'S 1-1/4"" - 10". The Ferrule Size Depends On The Hose Od.
Dixon Holedall stems and ferrules are specifically designed to be used together as a coupling system.
Due to differences in dimensions and tolerances, for safety reasons, do not use other manufacturer's stems or ferrules with Dixon Holedall products.
Do not use a wrench or vice on ferrule
Holedall couplings, regardless of coupling style, are never to be used for steam service at any pressure.
Holedall fittings are not to be used with cable reinforced high-pressure hose, 4 or 6 braid wire hydraulic hose or any other service not listed in the recommendations. Consult Dixon for recommendations on usage.
Externally swaged Holedall couplings, to perform satisfactorily, must be applied properly in accordance with Dixon's assembly procedures, using correct die and ferrule for that particular hose end OD. Dixon's Die and Ferrule Recommendation Guide is to be
Hose service working pressure (including surges and spikes) is never to exceed the maximum recommended working pressure for the fitting. The assembly's (hose + coupling) maximum working pressure is the lesser of the hose rated working pressure or the coup