Description
Dixon® Cam and Groove Adapter, Type E, Series: Boss-Lock™, Adapter, 2 in Nominal, Male Adapter x Hose Shank, 5-3/64 in Length, 250 psi, 316 Stainless Steel, Domestic
Features:
- In testing tank transport hoses from a wide variety of manufacturers, the Boss-Lock-PF fitting showed significant improvement in hose coupling retention over the conventional cam and groove shank design
- Produced to interchange with all product produced to Commercial item Description A-A-59326D
- For best results we recommend the use of 3/4 in wide band clamps
- Under no circumstances should cam and groove couplings be used for compressed air or steam service!
- Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70 deg F with a standard seal installed
- Pressure rating is based on the seal of the mating part
- Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
- Do not use in connection with drinking water
- Wash hands after handling
Applications:
The shank design on these fittings was developed specifically for chemical transport hoses having Cross-linked Polyethylene (XLPE) or Ultra High Molecular Weight Polyethylene (UHMW) tubes, where shank retention can be a problem when using conventional band clamps