Description
Dixon® Cam and Groove Adapter, Type E, Fitting/Connector Type: Adapter, 3/4 x 1/2 in Nominal Size, Male Adapter x Hose Shank, 2-5/16 in Length, 125 psi, Polypropylene, 17/32 in Dia
Features:
- Manufactured from a glass-filled polypropylene
- 1/2 in couplers and adapters will interchange with 3/4 in couplers and adapters, only the threads and barbs are 1/2 in
- Polypropylene cam and groove should not be mixed with metal fittings
- Under no circumstances should cam and groove couplings be used for compressed air or steam service!
- Pressure rating is based on the seal of the mating part
- Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70 deg F with a standard seal installed
- Not recommended for use with PTFE gaskets
- 125 psi at ambient temperature 70 deg F pressure
- Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
- Do not use in connection with drinking water
- Wash hands after handling
Warranty:
Limited
