Description
Dixon® Push-On Hose Mender, Fitting/Connector Type: Coupling, 1/2 in Nominal, 2-1/4 in Length, 2 Barb, 1.02 in Barb Length, 350 psi Pressure, -40 to 150 deg F, 303 Stainless Steel, Domestic
Features:
- Push-on fittings are intended for use with lok-on (push-on style) hose
- No hose clamp or ferrule needed
- Lock-on fittings will properly grip lok-on hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap
- Dixon® push-on fittings are intended for use with lok-on (push-on style) hose only
- Caution: push-on fittings will properly grip push-on hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap
Applications:
For pneumatic service, most fluids, low pressure hydraulics and non-potable water service
Standards/Approval:
- SAE J476/J512/J514/J516
- PROP65: This product can expose you to chemicals including lead, which is known to the State of Califonia to cause cancer and birth defects or other reproductive ham. Wash hands after handling. For more information go to www.P65Wamings.ca.gov.
Warranty:
Limited