Description
Dixon®, 2960606C, Push-On Hose Mender, Series: 296, Fitting/Connector: Coupling, 3/8 in Nominal, Push-On Barb End Style, 2.05 in Length, 2 Barb, 0.92 in Barb Length, 350 psi Pressure, -40 to 150 deg F, Brass, Yellow Cap, Domestic
Features:
- Trim hose end with smooth square cut
- Lubricate either push-on fitting, hose or both
- Insert push-on fitting into hose until first barb is in hose
- Place end of fitting against a flat object (bench, wall, etc.) and grip the hose 1 in from end
- Push with a steady force until end of hose is covered by yellow plastic cap
- 0.92 in L barb
- 2 barbs
- Lok-On fittings will properly grip Lok-On hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap
Applications:
For pneumatic service, most fluids, low pressure hydraulics and non-potable water service
Standards/Approval:
- SAE J476/J512/J514/J516
- PROP65: This product can expose you to chemicals including lead, which is known to the State of Califonia to cause cancer and birth defects or other reproductive ham. Wash hands after handling. For more information go to www.P65Wamings.ca.gov.
Warranty:
Limited
