Description
Dixon® Tube Elbow, 5/8 x 1/2 in Nominal, SAE Flare x MNPT, 90 deg, 650 psi, -65 to 250 deg F, Brass
Features:
- Economical fitting resists mechanical pullout
- Easy to disassemble and may be reassembled repeatedly, for a leak-proof connection
- 7/8-14 straight thread
- Cut tubing squarely and clean tube end thoroughly to remove burrs
- Place nut onto tube, place threaded end of nut toward end of tube
- Flare tube end with flaring tool to provide 45 deg flare
- Clamp tube flare between nut and nose of fitting body by screwing nut on finger-tight, tighten with a wrench an additional 1/4 turn for metal-to-metal seal
Applications:
For use with copper, brass, aluminum, welded steel hydraulic tubing that can be flared, manufactured especially for hard-to-hold liquids and gases
Standards/Approval:
- CA 360/CA 345/CA 377 Brass
- SAE 010202
- Listed with Underwriter's Laboratories for Flammable Liquid, Marine, Refrigeration and Gas Applications
- Meets functional requirements of SAE J512 and J513, ASA and MS (Military Standards)
- PROP65: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Warranty:
1 Year Limited
