Diamond’s RING LEADER O-ring chain is specifically designed for applications that don’t permit regular lubrication, requiring the chain to depend entirely upon initial factory lubrication throughout
its service life. Depending upon the specific conditions, RING LEADER can provide up to ten times the wear life of standard chain. Industries such as agriculture, food processing, packaging,
printing, textile and chemical processing can introduce contaminants that damage standard chain. Dirt, mud, food particles, paper fines, dust and moisture can cause buildup on the chain and clog
the openings on standard roller chain where lubrication enters the pin/bushing area. These contaminants can even get inside the chain, actually damaging the surface of pins and bushings.
RING LEADER O-ring chain is constructed with O-rings that seal a specially formulated lubricant into every joint. This sealed-in lubricant is essential for the chain’s optimum wear life and the
O-rings also help to seal out and protect the internal surfaces from dirt, contaminants and moisture. Diamond recommends that RING LEADER O-ring chain receive periodic external lubrication to
maintain moisture on the external O-ring surfaces and to lubricate roller/sprocket contact surfaces. Note: Standard RING LEADER O-ring chain can routinely operate in ambient temperatures up to 150° F. For higher temperature requirements, special O-rings can be substituted, allowing operation in temperatures of 400° F or greater. Because the RING LEADER chain lasts up to ten times longer than regular chain, overall economy of operation is improved. With lubrication already sealed into the chain, maintenance expense is lowered. RING LEADER O-ring chain experiences less wear elongation during normal operation, thus providing a longer service life. Life cycle costs of RING LEADER chain can be dramatically less than

Manufacturer	DIAMOND CHAIN COMPANY

This item has no supplemental files.