Allied Tube and Conduit 101550 - 3/4" EMT
Allied Tube & Conduit E-Z Pull EMT has a special low friction ID coating that greatly improves the slip properties between conduit and wire. With E-Z Pull EMT, wire pulls through the conduit smoothly and easily, making installation easier and faster.
E-Z Pull EMT combines strength with ductility, providing easy bending, cutting and joining while resisting flattening, kinking and splitting. The interior has a smooth continuous surface finish for fast wire pulling.
Trade Size: 3/4"
Outside Diameter: 0.922"
Nominal Wall Thickness: 0.049"
Allied Tube & Conduit EMT is very effective in reducing electromagnetic field levels for encased power distribution circuits, shielding computers and other sensitive electronic equipment from the effects of electromagnetic interference. For more information on EMT shielding, visit www.steelconduit.org/gemi.htm to obtain the GEMI (Grounding and Electro-Magnetic Interference) software analysis program
Full Code & Standards Compliance:
Allied Tube & Conduit EMT is listed to Underwriters Laboratories Safety Standard UL 797 and meets ANSI C80.3, which have been adopted as federal specifications in lieu of WWC 563. EMT is recognized as an equipment grounding conductor by NEC Section 250-118. Documentation for compliance with NEC Article 250 is also available in the GEMI (Grounding and Electro-Magnetic Interference) analysis software and related research studies found at the www.alliedeg.com website. Installation of EMT shall be in accordance with the National Electrical Code and the UL listing information. Allied Tube & Conduit EMT is listed in category FJMX. Master bundles conform to NEMA Standard RN2
To specify Allied Tube & Conduit EMT, include the following: Electrical Metallic Tubing shall be equal to that manufactured by Allied Tube & Conduit Corporation. EMT shall be hot galvanized steel O.D. with an organic corrosion resistant I.D. coating, and shall be listed and manufactured in accordance with UL Safety Standard 797 and ANSI C80.3. Kwik-Fit EMT and Compression EMT are tested to meet UL Safety Standard 514-B. Note that these UL and ANSI standards have been adopted by the federal government and separate military specifications no longer exist.
Manufactured For Long Life:
Allied Tube & Conduit EMT is precision manufactured from high grade mild strip steel for exceptional durability and long-lasting life. Allied Tube & Conduit EMT is hot galvanized using Allied Tube & Conduit's patented in-line Flo-Coat process. This process combines zinc, a conversion coating, and a clear organic polymer top-coat to form a triple layer of protection against corrosion and abrasion.