Description
CM® Universal Plate Clamp, Series: 92 Series, 675 to 6600 lb, 1-1/4 in Jaw Opening, 3.15 in Bail Opening Width, 7.559 in Overall Width, Load Activated Locking, High Tensile Steel
Features:
- CZ and 92 series plate clamps can be used on all hot rolled structural steel plates and sections up to a surface hardness of 300 Brinell (32HRc)
- Body of clamp is welded construction
- Can be used to lift a plate from the horizontal to vertical position and vice versa through 180 deg
- Clamp jaws and pads are manufactured from high tensile steel
- Fitted with a hold open and lock closed lever
- To initiate the self actuating force, a spring is incorporated into the clamp to give an initial bite on the material
- If the plate should start to slip during lifting, the cam shape of the jaw turns with the material and increases the gripping force
- The cam handle is ergonomically designed with a flat surface to allow for ease of operation while wearing protective gloves
- The cam handle connects to the cam via a robust square drive
- Unlike others, these plate clamps are designed with a sloping slot, which increases the grip on the load when the clamp is in the horizontal position
- Design factor 4:1
Standards/Approval:
