Description

CM® Lodestar® Electric Chain Hoist, Series: Model R, 2 ton, 10 ft Lifting Height, 8 fpm Lift Speed, 24-1/8 in Minimum Between Hooks, 1-5/16 in Hook Opening, 1-Speed Control, 1 hp, 115 VAC

Features:

• Non-powered creep is used on 115 V single phase Lodestar® for a creep function in the down direction only
• A recycling timer is used which has a fixed ON time of 0.1 sec and a fixed OFF time of 0.3 sec
• This timer when activated will pulse the brake open, then closed, then open, then closed, etc and will continue as long as the down push button is depressed or until the hoist reaches the lower limit
• This eliminates the need of the operator to depress and release the pushbutton for each creep actuation
• Please note that a non-powered creep does require a load greater than approximately 10% of the rated hoist capacity to function properly

Control Type	1-Speed
Hook Opening	1-5/16 in
Lift Speed	8 fpm
Lifting Height	10 ft
Load Capacity	2 ton
Minimum Between Hooks	24-1/8 in
Power Rating	1 hp
Series	Model R
Voltage Rating	115 VAC
Manufacturer	COLUMBUS MCKINNON CORPORATION