Description

EATON General Purpose Distribution Transformer, Type EP Dry Encapsulated, 4160 VAC Primary, 120/240 VAC Secondary, 10 kVA Power, 60 Hz Frequency, 1 Phase, 4 Taps, Lug Connection, 182 Frame Circuit, Upright Mounting, 180 deg C Insulation, NEMA 3R Enclosure, 115 deg C, Steel Housing Material, 14.12 in L x 16.35 in W x 23.31 in H Dimensions

Features:

• Primary taps allow compensation for source voltage variations
• Transformer core is constructed using high grade, non-aging, silicon steel to provide high magnetic permeability
• Maximum magnetic flux densities are substantially below the saturation point, allowing for more efficient operation
• All insulation materials are flame-retardant and do not support combustion for added safety
• Core and coil assembly is impregnated with non-hygroscopic, thermosetting varnish and cured to reduce hot spots and seal out moisture
• Audible sound levels are lower than IEEE requirements when properly installed
• Aluminum winding
• 4 at -2.5% taps

Applications:

Indoor/Outdoor Applications

Standards/Approval:

• UL Listed
• CSA Certified
• NEMA ST-20
• ANSI Specified
• IEEE Standard
• UBC Certified
• IBC Certified
• California Code Title 24 Compliant

Warranty:

1 year

Circuit Type	182 Frame
Connection Type	Lug
Dimensions	14.12 in L x 16.35 in W x 23.31 in H
Enclosure Type	NEMA 3R
Frequency Rating	60 Hz
Housing Material	Steel
Insulation	180 deg C
Mounting Type	Upright
Number of Taps	4
Phase	1
Power Rating	10 kVA
Primary Voltage	4160 VAC
Secondary Voltage	120/240 VAC
Temperature Rating	115 deg C
Type	Type EP Dry Encapsulated
Manufacturer	CUTLER-HAMMER INC