Description

EATON Distribution Transformer, Type EP Dry Encapsulated, 240/480 VAC Primary, 120/240 VAC Secondary, 1.5 kVA Power, 60 Hz Frequency, 1 ph, Lug Connection, 67P Frame Circuit, Upright Mounting, 130 deg C Insulation, NEMA 3R Enclosure, 115 deg C, Steel Housing Material, 6.56 in L x 5.53 in W x 13.03 in H Dimensions

Features:

• Primary taps allow compensation for source voltage variations
• Transformer core is constructed using high grade, non-aging, silicon steel to provide high magnetic permeability
• Maximum magnetic flux densities are substantially below the saturation point, allowing for more efficient operation
• All insulation materials are flame-retardant and do not support combustion for added safety
• Core and coil assembly is impregnated with non-hygroscopic, thermosetting varnish and cured to reduce hot spots and seal out moisture
• Audible sound levels are lower than IEEE requirements when properly installed
• Aluminum windings
• No taps

Applications:

General Purpose, Indoor and Outdoor Applications

Standards/Approval:

• UL Listed
• CSA Certified
• NEMA ST-20
• ANSI Specified
• IEEE Standard
• UBC Certified
• IBC Certified
• California Title 24 Compliant

Warranty:

1 year

Circuit Type	67P Frame
Connection Type	Lug
Dimensions	6.56 in L x 5.53 in W x 13.03 in H
Enclosure Type	NEMA 3R
Frequency Rating	60 Hz
Housing Material	Steel
Insulation	130 deg C
Mounting Type	Upright
Phase	1
Power Rating	1.5 kVA
Primary Voltage	240/480 VAC
Secondary Voltage	120/240 VAC
Temperature Rating	115 deg C
Type	Type EP Dry Encapsulated
Manufacturer	CUTLER-HAMMER INC