Description
Cutler-Hammer Miniature Circuit Breaker, 277 VAC, 48 VDC, 30 A, 50/60 Hz Frequency, 5 kA Interrupt, Shunt Trip, 10 to 20 A Trip, 3 Pole, 18 to 8 AWG Wire, DIN Rail Mounting, -40 to 167 deg F, 80 mm H x 53.1 mm W Dimensions
Features:
- Current limiting design provides fast short circuit interruption that reduces the let-through energy, which can damage the circuit
- Suitable for branch circuit device protection
- Thermal magnetic over current protection
- Three levels of short circuit protection, categorized by B, C and D curves
- Trip-free design breaker can not be defeated by holding the handle in the ON position
- Captive screws cannot be lost
- SWD (switching duty) suitable for switching fluorescent lighting loads (In<=20 A)
- Field-installable shunt trip and auxiliary switch subsequent mounting
- Separate versions for ring tongue connection (type FAZ-RT or FAZ-RT-L), terminal screws can be removed (on both sides)
- Module width of only 17.7 mm (per pole)
- Contact position indicator (red/green)
- Possibility for sealing the toggle in ON-OFF position
- Complements UL 1077 offering
- D curve circuit protection
Applications:
Branch Circuit Device Protection
Standards/Approval:
- UL Listed
- CSA Certified
- CE Marked
- RoHS Compliant
- PROP65: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
