Description

EATON Air Conditioning Disconnect Switch, Molded Case, 240 VAC, 60 A, 10 hp, 1 ph, 2 Pole, 2 Wires, 10 kA Short Circuit, NEMA 3R Enclosure, Surface Mounting, 60 to 75 deg C, 5.3 in L x 3.74 in W x 8.6 in H Dimensions, Steel, Gray, Hot Dipped Galvanized

Features:

• Air conditioning disconnects (ACD) are located between a load center (distribution panel) and an air conditioner
• ACD provide a visible disconnecting means when performing maintenance and are commonly referred to as disconnects, pullouts or air conditioning switches
• ON/OFF control provided by a Pull-out handle
• Pull-out handle can be conveniently stored in the compartment in the Off position, helping to prevent the handle from being misplaced
• Protective shield cannot be removed until the pullout handle is removed, disconnecting the power
• 14 to 3 AWG copper/aluminum wire

Applications:

Power Distribution Applications

Standards/Approval:

• UL Listed
• cULus Listed
• CSA Certified
• Federal Specification WW-H-171E/A-A-1192A Type 12
• ANSI Specified
• MSS SP-69
• MSS SP-58 Type 1
• FM Approved

Amperage Rating	60 A
Color	Gray
Dimensions	5.3 in L x 3.74 in W x 8.6 in H
Enclosure Type	NEMA 3R
Finish	Hot Dipped Galvanized
Horsepower	10 hp
Material	Steel
Mounting Type	Surface
Number of Poles	2
Number of Wires	2
Phase	1
Short Circuit Current Rating	10 kA
Temperature Rating	60 to 75 deg C
Type	Molded Case
Voltage Rating	240 VAC
Manufacturer	CUTLER-HAMMER INC