Description
EATON Meter Stack Module, 5-Jaw 5-Socket Multiple Metering, Series: 3MM, 120/208 VAC, 125 A, 1/3 ph, 4 Wires, 14 to 2 AWG, 6 to 2/0 AWG Al/Cu Wire, 100 kA Short Circuit, Bus Bar Connection, Galvanized Steel, NEMA 3R Enclosure, 55-1/2 in L x 15 in W x 8 in D Dimensions
Features:
- Meter socket and tenant main breaker or wireway sections are separated by a solid metal barrier to guard unmetered bus against power theft
- 4-wire horizontal bus lets you use any 3 mm module for 1/3-phase incoming service
- A convenient termination for neutral conductors is in the wireway of each module
- Non-removable barrier encloses the 800 a horizontal aluminum bus passing through tenant breaker section
- Factory installed inside gutter, a standard feature that's moveable to the top or bottom gutter
- Knockouts are tangential in bottom endwall
- Rust inhibiting phosphate primer and gray baked enamel superior finish
- Unique meter socket base is installed without any fasteners reducing chances for hot spots, easily replaceable and improves connection to vertical bus
- Mains and modules slip together quickly and smoothly with front accessible captive bolts securing the juncture without removing socket interiors or bus access plate
- Separate covers allow easy access to tenant breaker and wireway section, permit work on breakers or in wireway without disturbing meters or meter covers
- 1-piece vertical busbar from phase balancing joints to meter socket eliminating any chance for hot spots
- Mechanically and electrically built to bolt up with main service modules and commercial modular metering stacks
- 6 to 2/0 AWG aluminum copper branch neutral and 14 to 2 AWG aluminum copper equipment ground bar
- 5-jaws at 9 o'clock position
- 3-phases in and 1-phase OUT design
- Without bypass
Applications:
Outdoor, Power Distribution and Residential Applications
Standards/Approval:
Warranty:
1 year
