Description
EATON Meter Stack Module, 4-Socket 5-Jaw Multiple Metering, 120/208 VAC, 200 A, 1/3 ph, 4 Wires, 14 to 2/0 AWG, 1/0 AWG to 300 kcmil Al Wire, 100 kA Short Circuit, Bus Bar Connection, Galvanized Steel, NEMA 3R Enclosure, 7.01 in L x 13.5 in W x 64.5 in D Dimensions
Features:
- Meter socket and tenant main breaker or wireway sections are separated by a solid metal barrier to guard unmetered bus against power theft
- A convenient termination for neutral conductors is in the wireway of each module
- Enclosures are made of galvanized steel construction and include rust inhibiting phosphate primer and gray baked enamel for long term durability
- Meter socket base is installed without any fasteners, reducing chances for hot spots
- Separate covers allow easy access to tenant breaker and wireway section as well as permit work on breakers or in wireway without disturbing meters or meter covers
- For use with CCV2_X, CCVH2_X, CVS2_XMM, CV2_XMM and CVH2_XMM bolt-on type main tenant breaker
- Interrupt rating depends on selected main circuit breaker
- 3 mm stacks are 3-phases in, 1-phase OUT design
- Short circuit ratings up to 100000 A RMS symmetrical depending upon AIC rating of installed main tenant circuit breakers and main device
- Mechanically and electrically built to bolt up with main service modules and commercial modular metering stacks
- All 3-phases horizontal bus modules have 4-wire cross bus, connected A-B phase to vertical bus, readily reconnectable for phase balance on installation
- All 3 mm stacks include 5-jaws at 9 o'clock position
- Standard 800 A aluminum bus
- 3-phases in and 1-phase OUT design
Applications:
Residential, Power Distribution, Outdoor, Electrical Assemblies, Panels and OEMs Applications
Standards/Approval:
Warranty:
1 year
