Description
nVent CADDY, TSR1220R, Telescoping Strut, Replacement Retrofit Slotted, 1-5/8 in Width, 1-3/8 in Depth, 14 to 21-1/2 in Length, 0.04 in Thickness, 200/300 lb Static Load, Steel, Pre-Galvanized, Domestic
Features:
- Slotted ends allow the bracket to be installed with four nVent CADDY SN nuts on threaded rod above an existing trapeze, saving contractor time and limiting building downtime
- Telescopes to the desired length and is locked in place by snapping closed a spring retainer clip
- Standard strut profile runs the entire length of the part, allowing most standard fittings to be placed anywhere between the rods
- Integrated ruler displays space between hanger rods in inches and centimeters
- Supports up to seven 2 in (50 DN) conduits, six 2 in (50 DN) water filled pipes at 10 ft spacing or up to 18 in cable tray
- Conduit can be supported on the top and bottom, eliminating the need for double sided strut
- Conduit and pipe can be placed directly on the strut profile, saving vertical space in buildings with limited room for installation
Applications:
Electrical, Datacom and HVAC Applications
