Description
Bradford White® Gas Water Heater, 38000 Btu/hr Heating, Liquid Propane Fuel, 1/2 in Gas Connection, 50 gal Tank, Piezo Ignition, Atmospheric Vent, 3 x 4 in Vent, 43 gph Recovery Rate, 0.63, 3/4 in NPT Water Connection, 150 psi Pressure, No Ultra Low NOx, 22 in Dia x 25-1/2 in D x 60-5/16 in H, Domestic
Features:
- Bradford White® ICON System™: Intelligent gas control with proven millivolt powered technology and built-in piezo igniter off the shelf thermopile converts heat energy from the pilot flame into electrical energy to operate the gas valve and microprocessor, no need for external electricity
- Enhanced performance: Proprietary algorithms provide enhanced first hour delivery rating and tighter temperature differentials
- Advanced temperature control system: Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels
- Intelligent diagnostics: An exclusive green led light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting
- Pilot on indication: Flashing green led provides positive indication that pilot is on
- Separate immersed thermowell: High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve
- Advanced ScreenLok® technology flame arrester design: Flame arrester is designed to prevent ignition of flammable vapor outside of the water heater
- Resettable thermal switch: Proven and reliable bimetallic switch prevents burner and pilot operation in case of ongoing flammable vapors burning inside of the combustion chamber or restricted air flow
- Maintenance free: No regular cleaning of air inlet openings or flame arrester is required under normal conditions
- Sight window: Offers a view into the combustion chamber to observe the operation of the pilot and burner
- Factory installed Hydrojet® total performance system: Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank
- Vitraglas® lining
- Insulation system: Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity
- Pedestal base
- Water connections: 3/4 in NPT factory installed true dielectric fittings
- Factory installed heat traps
- Protective magnesium anode rod
- 3 x 4 in "Snap Lock" draft diverter: Allows either 3 or 4 in vent connections with inputs of 40000 Btu/hr or less, over 40000 Btu/hr has the 4 in "Snap Lock" draft diverter
- Low restriction brass drain valve: Durable tamper proof design
- FVIR defender safety System®
Applications:
Residential Application
Standards/Approval:
- AHRI Certified
- ANSI Z21.10.1-2014
- ASHRAE 90.1b
- CEC Listed
- CSA 4.1-2014
- CSA International (Formerly AGA/CGA)
- CSA LLC - Low Lead Compliant
- Massachusetts Approved
- NAECA Compliant
- NSF 372
- PROP65: Cancer and Reproductive Harm - www.P65warnings.ca.gov
Warranty:
6 Years Limited on Tank/6 Years Limited on Component Parts
