Details
CDS-John Blue VRH-JD-15
Cds-John Blue Hydraulic Drive Kits For Piston Metering Pumps
Features:
Base Kit to add variable rate capacity to a CDS-John Blue Piston Pump for your planter or applicator. Other required off-the-shelf components to complete the kit are detailed in the instructions.
Existing pumps can be easily converted to variable rate and sectional shut-off.
A piston pump allows for quick and stable adjustment to application rates within a fraction of a second using this technology.
With a piston pump your application rates will not change with the temperature or lack of head pressure.
Sturdy mounting bracket attaches to the side or top of the machine's bar.
Two types of flow control valves (servo or PWM) are available based on the kit you select.
Hydraulic 2-way bypass valve turns pump and liquid flow on and off.
Hydraulic motor requires 10 GPM to run the piston pump at maximum rpm, but the system can be used at lower GPM as the specific application allows.
The manual speed drive system allows you to mount your pump anywhere on the machine and set the pump at a constant speed.
The manual speed drive can also be used with other brands of hydraulic flow control valves in order to interface with controllers that are not listed below.
"Bracket only kits" allow the use of the Precision Planting motor, Dickey-John motor and others.
Specifications:
Multi-Section Variable Rate Hydraulic Drive Kit for John Deere CANbus Planters using GreenStar GS2 and GS3. Kit includes: bar mounting bracket, chain, sprockets, hydraulic motor, PWM flow control manifold, harness to control up to 7 section valve, and setup instructions with parts listing for obtaining off-the-shelf components to complete installation. Other applications may work, but CANbus wiring must be present.