Description

Berko® Heater, Fan Forced, Series: MFQ, 27368 Btu/hr Capacity, 240 V, 33.3 A, 8000 W Power, 31-3/4 in Width, 22-19/32 in Height, Wall Mounting, Nickel Chromium with Steel Sheathing, Northern White, Galvanized/Baked Enamel Paint

Features:

• The back box shall be designed for duty as a recessed rough-in box in either masonry or frame construction and also when mounting directly to the surface of the finished wall in surface mounting installation
• The back box shall be heavy gauge galvanized steel and shall contain knockout through which field wiring lead are brought
• The inner frame assemblies shall consist of a heavy gauge steel chassis on which are mounted the heating element, fan motor and blade, thermostat, control and thermal cutout
• The inner frame assemblies shall be completely prewired
• The heating element shall be guaranteed for five years and shall be of non-glowing design consisting of 80/20 Ni/Ch resistance wire enclosed in a steel sheath to which steel plate fin are brazed
• The element shall cover the entire air discharge area to ensure uniform heating of all discharged air
• The fan motor shall be impedance protected, permanently lubricated and totally enclosed
• Fan control shall be bi-metallic, snap action-type and shall activate fan after heating element reach operating temperature and continue to operate the fan after the thermostat is satisfied and until all heated air has been discharged
• Thermostat shall be tamper-resistant on all model
• Thermal cutout shall be bi-metallic, snap action-type designed to shut-off heat in the event of over heating
• A double-pole, single throw switch will be provided for positive disconnect of power supply
• It will be completely concealed behind the front cover
• It will be standard on all unit
• The louvered front cover shall be of heavy gauge steel finished in northern white baked enamel
• Slot knockout shall be provided for power supply conduit
• All sheet metal part, except the galvanized steel back box, shall be phosphatized, then completely painted by a baked enamel painting process
• Internet thermostat
• Thermal overheat protectors disconnect power in event of accidental blockage
• Power on/off switch for added safety during maintenance
• Permanently lubricated enclosed fan motor provides long-life and low maintenance

Applications:

Commercial Application

Standards/Approval:

• cULus File No. 21609
• UL Listed

Amperage Rating	33.3 A
Capacity	27368 Btu/hr
Color	Northern White
Finish	Galvanized/Baked Enamel Paint
Height	22-19/32 in
Material	Nickel Chromium with Steel Sheathing
Mounting Type	Wall
Power Rating	8000 W
Series	MFQ
Type	Fan Forced
Voltage Rating	240 V
Width	31-3/4 in
Manufacturer	Berko - Div of Marley