Description
Asahi-America® Ball Valve, Series: T-21, 1 in Nominal, Socket x Thread End Style, 230 psi Pressure, 30 to 210 deg F, Full Port, PVC Ball, PVC Body, PVC Stem and PTFE Seat Trim, EPDM Softgoods
Features:
- Pressure rated up to 230 psi (PVC, CPVC, PVDF)
- Double O-Ring seals on stem for added protection
- 1/2 to 2 in full bore
- Full vacuum rated all sizes
- Blocks in two directions upstream and downstream leaving full pressure on the opposite end of the valve
- Integrally molded ISO mounting pad for both manual and actuated operations
- Integrally molded base pad to mount valves Securely or panel mounting
- PTFE seats with elastomeric backing cushions ensure bubble-tight shut-off and a low fixed torque while at the same time compensating for wear
- True Union design for easier installation or repairs without expanding the pipe system
- Built-in spanner wrench on the handle for valve disassembly and assembly
- Two sets of end connectors (socket and threaded) included with all PVC and CPVC valves in sizes 1/2 to 2 in
- CPVC threaded end connectors on sizes 1/2 to 1 in come with stainless steel reinforcing rings
- New PTFE Seat design - Facilitates easier field maintenance if required
- Tapered O-Ring groove - Helps to Keep the end connector O-Rings on the valve body during installation
- Body flats - flats have been added to either side of the valve body where a wrench can be applied to prevent the valve body from turning when the union nuts are tightened
- ABS Product Approved for use in marine and offshore applications
- EPDM O-ring
Applications:
Isolation Valves, Water Treatment, Water Features, Fountains, Aquariums, Landfills, Swimming Pools, Power Plants, Mining, Transportation, Chemical Processing
Standards/Approval:
