Description
Appleton® Lighting Distribution Panelboard, Explosionproof Factory Sealed Main Breaker, Series: ALPF, 120/240 VAC, 225 A, 1 Pole, 10 kA Interrupt, 36 Circuits, BAB Breaker, Copper Plated Bus, NEMA 4/4X/7B/7C/7D/9E/9F/9G Enclosure, Copper Free Aluminum Housing Material, 67.13 in H x 21 in W x 13 in D Dimensions, Gray
Features:
- Breaker operators included as standard
- O-ring gasket insures watertight integrity
- Factory sealed, no external seals are required for most branch circuits
- All conduits must be sealed adjacent to enclosure for class I, division 1, Groups B and C
- Breakers are housed in the panel section and prewired to maximum circuit capacity, then wired to numbered terminals in the wiring compartment
- Terminal compartment is interconnected to panel section with sealing hubs, unions and poured with sealing compound
- Precision machined flame path between body and cover
- Bolt on stainless steel slotted mounting feet
- Breaker operators can be padlocked in the on or off position
- Chassis assembles with mains at top (bottom optional)
- Factory installed ground and neutral bar as standard
- Quad-Lead® stainless steel cover bolts, hinges are standard
- Neoprene O-ring
- Main breaker constructional type
- Corrosion resistant gray epoxy powder coat to provide NEMA 4X rating
- Dust-ignitionproof
Applications:
For lighting, heating, small motors, similar electrical equipment and hazardous locations
Standards/Approval:
- UL 1203/E84577
- UL Listed for Class I, Div 1 and 2, Groups B, C, D
- Class II, Div 1 and 2, Groups E, F, G Class III, Class I, Zone 1, Group IIB +H2
