Description
Apollo™ Electric Actuator, Series: AE Series, 200 in-lb Output, 90 deg at 50% Load Travel, 5 s at 50% Load Timing, 115 VAC, 0.74 A Supply, 1/2 in FNPT Conduit, 32 to 150 deg F, Die Cast Aluminum Body, Nitrile, Anodized, Domestic
Features:
- Long service life
- Fiberglass reinforced nylon cover resists corrosion
- Nitrile gasket and seals cover all penetration points in housing and cover
- Precision cut and heat treated alloy spur gears
- Permanently lubricated enclosed gear train
- Two separate 1/2 in NPT conduit entrances for easier wiring and signal separation
- Unrestricted mounting orientation
- Built-in thermal overload protection in all AC motor actuators
- Limit switches have an 11 A rating at 115 VAC
- High visibility valve position indicator standard on all models
- Stainless steel push-and-turn manual override shaft, position indicator shaft and female output
- ISO 5211 F07 drive output reduces inventory of mounting kits
- Reversible rotation
- Stall detection - Motor will not burn out from stalling
- Fault signal - Fault LED on DHC-100 front panel
- Duty cycle protection - Allows actuators rated for 25% duty, or more, to be safely modulated
- Activates prior to tripping of thermal overload protector, which prevents long shut down periods due to tripping thermal overload protector, allows the actuator to continue to move to set-point at a 25% duty cycle speed
- NEMA 4, 4X
- Nitrile gasket/seal
Applications:
Commercial and Industrial
Standards/Approval:
- CSA Certified
- PROP65: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Warranty:
5 years