Description
Anvil® Clevis Hanger, Adjustable, Series: FIG 260SS, 1/2 to 3/4 in Pipe, 3/8 in Rod, 610 lb, 7 ft Span, 304 Stainless Steel
Features:
- Hanger load nut above clevis must be tightened securely to assure proper hanger performance
- Vertical adjustment without removing pipe may be made from 3/8 in through 5-1/8 in, varying with the size of clevis
- Tighten upper nut after adjustment
- Design has yoke on outside of lower U-strap so yoke cannot slide toward center of bolt, thus bending of bolt is minimized
- Thread length on clevis rod is such that the thread locks the nuts in place and threads are not in shear plane
- Span represents the maximum span for water filled pipe
Applications:
For Suspension of Stationary Pipe Lines
Standards/Approval:
- Federal Specification A-A-1192A Type 1
- ANSI/MSS SP-69 Type 1
- cULus Listed
- FM Approved
- MSS SP-58 Type 1
- UL/ULC Listed
- WW-H-171-E Type 1
