Description
Anvil® Clevis Hanger, Adjustable, Series: FIG 260, 20 in Pipe, 1 in Rod, 4800 lb, Carbon Steel, Black Oxide, 650 deg F
Features:
- Design has yoke on outside of lower U-strap so yoke cannot slide toward center of bolt, thus bending of bolt is minimized.
- Hanger load nut above clevis must be tightened securely to assure proper hanger performance
- Vertical adjustment without removing pipe may be made from 3/8 in through 5-1/8 in, varying with the size of clevis
- Tighten upper nut after adjustment
- Design has yoke on outside of lower U-strap so yoke cannot slide toward center of bolt, thus bending of bolt is minimized
- Sizes 5 in and up have rod and two nuts instead of bolt and nut, thread length on clevis rod is such that the thread locks the nuts in place and threads are not in shear plane
Applications:
For suspension of stationary pipe lines
Standards/Approval:
- A-A-1192A (Type 1)
- ANSI/MSS SP-69/SP-58 (Type 1)
- cULus Listed
- FM Approved
- WW-H-171-E (Type 1)
- UL/ULC Listed
