Description
AnvilĀ® Beam Clamp, Universal, Series: FIG 228, 7/8 in Rod, 1.031 in Flange Thickness, 15 in Flange Width, 4480 lb Load, Forged Steel, Black Oxide
Features:
- For suspension of heavy loads from beams with flange widths to 15" and flange thickness to 1.031.
- Fit jaws over edges of lower beam flange and tighten nuts on tie rod to lock clamp in place
- Upper nut is tapped to any specified size up to the maximum rod size
- Quickly, easily, economically installed
- Tie rod insures a tight non-slip fit to the beam
- The application of a load to a structural beam by means of a beam clamp produces a transverse stress, perpendicular to the axis of the beam, in the flange to which the load is applied
- Clamp size number 2
Applications:
For suspension of heavy loads from beams
Standards/Approval:
- ANSI/MSS SP-69/SP-58 (Type 28 Without Links; Type 29 With Links)
- Federal Specification A-A-1192A (Type 28 Without Links; Type 29 With Links)/WW-H-171-E (Type 30 and 31)