Constant Velocity Shaft without implement yoke. C-to-C Length: 48" (1210 mm). Tractor end: 1-3/8" - 6 Spline. Size: 8. Replaces: 76232, 85006. It may be necessary to cut this driveline to length. Verify the length by ensuring that sufficient overlap of the drive tubes exists in all working positions without the possibility of bottoming out. Fits Bondioli & Pavesi 100 Series 80 EL CV: Size 8.
• Select Implement yoke needed from associated items.
• It may be necessary to cut this driveline to length. Verify the length by ensuring that sufficient overlap of the drive tubes exists in all working positions without the possibility of bottoming out.
76232, 85006
8
48"
1 3/8" 6 Spline
Cross Kit Less Yoke
| Driveline > CV Driveline Assembly |
| Bondioli & Pavesi 100 Series 80 EL CV: Size 8 |
next >> | Item Number | Description | Qty |
| A-BP211085251-A | Implement Yoke, Round Bore 45mm w/ 13mm Pin Hole | 1 |
| A-BP212086753 | mplement Yoke, Round Bore 1 3/4" w/ 3/8" Keyway | 1 |
| A-BP212086753-A | mplement Yoke, Round Bore 1 3/4" w/ 3/8" Keyway | 1 |
| A-BP212086756-A | Implement Yoke, Round Bore 1 1/2" w/ 3/8" Keyway | 1 |
| A-BP507080351-A | Implement Yoke, Splined 1 3/8" - 6 Spline w/ QDP | 1 |
| A-BP507080451-A | Implement Yoke 1-3/4" 6 Spline QD | 1 |
| A-BP507083751-A | Implement Yoke, Splined 1 3/8" - 21 Spline w/ QDP | 1 |
| A-BP509080355 | Implement Yoke, Splined 1 3/8" - 6 Spline w/ Interfering Clamp Bolt | 1 |
| A-BP509080355-A | Implement Yoke, Splined 1 3/8" - 6 Spline w/ Interfering Clamp Bolt | 1 |
| A-BP509080455 | Implement Yoke, Splined 1 3/4" - 6 Spline w/ Interfering Clamp Bolt | 1 |
| A-BP509083754 | Implement Yoke, Splined 1 3/8" - 21 Spline w/ Interfering Clamp Bolt | 1 |
| A-BP509083754-A | Implement Yoke, Splined 1 3/8" - 21 Spline w/ Interfering Clamp Bolt | 1 |
| A-BP509083855 | Implement Yoke, Splined 1 3/4" - 20 Spline w/ Interfering Taper Pin | 1 |
| A-BP509083855-A | Implement Yoke, Splined 1 3/4" - 20 Spline w/ Interfering Clamp Bolt | 1 |
| A-BP509086353-A | Implement Yoke, Round Bore 35mm w/ 10mm Keyway & Non-Interfering Clamp | 1 |
| A-BP509086451-A | Implement Yoke, Round Bore 40mm w/ 12mm Keyway & Non-Interfering Clamp | 1 |
| A-BP509086551-A | Implement Yoke, Round Bore 45mm w/ 14mm Keyway & Non-Interfering Clamp | 1 |
| A-BP5720M0376 | Implement Yoke, Splined 1 3/8" - 6 Spline w/ Slide Collar | 1 |
| A-BP5720M0376-A | Implement Yoke, Splined 1 3/8" - 6 Spline w/ Slide Collar | 1 |
| A-BP5720M0476 | Implement Yoke, Splined 1 3/4" - 6 Spline w/ Slide Collar | 1 |
| Item Number | Description | Qty |
| A-BP125171500 | Outer Tube | 1 |
| A-BP204086888 | Inner Tube Yoke | 1 |
| A-BP245391500 | Inner Tube - Rilsan Coated | 1 |
| A-BP4120L0051 | Cross & Bearing Kit (Extended Lube CV) | 2 |
| A-BP4120M0011 | Cross & Bearing Kit (Extended Lube) | 1 |
| A-BP5F08121W1UC | Complete Shield | 1 |
| A-BP5110L0063 | CV Center Body | 1 |
| A-BP5730L0384 | Tractor Yoke, Splined 1 3/8" - 6 Spline w/ Ball Collar, CV | 1 |
| A-P12X70 | Roll Pin, 12 MM x 70 MM, 2 pack | 1 |
| A-P12X90 | Roll Pin, 12mm x 90mm, 2 pack | 1 |
| Item Number | Description | Qty |
| A-W258012100101 | Complete Constant Velocity Shafts | |
| A-W258012100102 | Complete Constant Velocity Shafts | |
| A-W258012100103 | Complete Constant Velocity Shafts | |
| Replaces: | BPCV812100103 | DRIVELINE |
| 02981675 | MISCELLANEOUS |
| 50053304 | BUSH HOG |
| 76625 | BUSH HOG |
| 826-076C | LAND PRIDE |
| 826-098C | LAND PRIDE |
| 85000BH | BUSH HOG |
| 85005 | BUSH HOG |
| Crossed From: | 76232 | BUSH HOG |
| 85006 | BUSH HOG |
