Details
Chemical and Material Handling Pumps
Alemite Chemical and Material Handling Pumps are designed to provide
the capabilities and versatility needed to construct systems meeting
all the individual requirements of various applications. Chemicals and
materials are pumped from their original containers or bulk storage
tanks, transferred to the point of application and then sprayed,
dispensed or extruded.
GT Manual Pumps
Alemites new line of versatile GT manual pumps offers the perfect
solution to a variety of liquid transfer applications. They can
adjusted to fit a wide variety of container sizes simply by cutting
the siphon tube (included) to size. The optional remote dispensers
allow dispensing up to ten feet from the pump, while the air adapter
accessory converts the pump from manual to pneumatic power for even
greater versatility. Pumps include siphon tube and three drum seals to
fit nearly any container. Remote dispensers include 10 feet of PVC
tubing and hose clamps, and come assembled and ready to use. Air
adapter is sold separately and attaches directly to the pump.
Air-Operated Material Handling Pumps
Alemite Air-operated Chemical and Material Handling Pumps are
efficient solutions for a wide range of applications and are designed
for heavy-duty service and long life. Alemite Chemical and Material
Handling Pumps have two main componentsair motors and downtubes.
Alemite pumps have these features:
* Only use an average of 4-6 CFM of air per gallon of material
pumped
* Only required amount is pumpedleaving no material waste
* Pumps operate on demand
* Separated air motor prevents material contamination from pump tube
* Material is pumped on both up and down piston strokes for uniform
flow
Air Motors
All Alemite Air Motors are factory tested and lubricated for maximum
service life and offer these features:
* Aluminum casting and cylinders are lightweight, corrosion
resistant and provide good heat transfer to minimize icing
* Double-toggles provide even pressure, prevent air motor stalling
or binding
* In-line exhaust meets OSHA noise requirements when equipped with a
muffler
* Precision-lapped air valve has wide air passages with no
restrictions, eliminating packings or spools that can deteriorate
Downtubes
The proper downtube is included with each pump and offers the
following features:
* Hardened valve seats and checks
* Hardened and ground piston rods
* Highly polished tube cylinders
* Packings custom fit each application
Alemite offers three types of downtubes to assure that all varieties
of materials can be pumped.
* Double Ball Type Large porting for positive priming and pumping
of light, viscous Class 1 and 2 materials
* Power Piston Type Combines the priming advantages of a ball
check with the abilities of an upper chop check to handle heavier
Class 2, 3 and 4 materials
* Dynamic Primer Type Primer rod extends below pump cylinder to
penetrate and work the material as well as provide positive
priming of the heaviest pumpable Class 5 and 6 materials
Applications
Dispense Dispensing involves the transfer of pumpable materials from
their original containers or bulk storage to the point of application.
Dispensing and transferring pumps are available to handle very light
liquids, heavy sealers, inks and other similar products.
Extrude Extruding is the application of heavy materials in a usable
form, such as ribbons or beads. Extruding systems can handle caulks
and sealers and varied chemical, food or pharmaceutical materials.
Spray Materials may be sprayed using air-atomizing or airless spray
systems. Applications include the spraying of adhesives, roof coatings
and hundreds of similar applications.
Pump Selection Guide
Class Pumps to Dispense Pumps to Extrude Pumps to Spray
Class 1 6799, 7216-S3, 7216-4, 7222-B4, 7880-C1, 340177-1, 340177-2,
340177-3 N/A 7835-C1, 7835-DTR1, 7835-SDTR1, 7880-C1
Class 2 6799, 7216-A4, 7216-B, 7216-S3, 7216-4, 7222-B4, 7835-C1,
7835-DTR1, 7835-SDTR1, 7880-C1, 340177-1, 340177-2, 340177-3 7835-C1,
7835-DTR1, 7835-SDTR1 7835-C1, 7835-DTR1, 7835-SDTR1, 7886-A5, 7886-B,
7886-S5
Class 3 7835-C1, 7835-DTR1, 7835-SDTR1, 7886-A5, 7883-B, 7886-S5
7835-C1, 7835-SDTR1, 7886-A5, 7886-B, 7886-S5 7886-A5, 7886-B,
7886-S5, 7896-A5, 7896-S5
Class 4 7886-A5, 7886-B, 7886-S5, 7896-A5, 7896-S5, 7890-A 7886-A5,
7886-B, 7886-S5, 7896-A5, 7896-S5, 7890-A 7889-6, 7889-C
Class 5 7889-6, 7889-C, 7893-A 7889-6, 7889-C, 7893-A N/A
Class 6 7889-6, 7889-C, 7893-A 7889-6, 7889-C, 7893-A N/A
Material Classification
Class Fluid Type Fluids
Class 1 Light Fluids (Viscosity 5 to 400 cps) Acids, Adhesives,
Cosmetics (fluid), Dextrose (liquid), Food Flavorings, Inks (liquid),
Lubricating Oils (SAE 10 to SAE 40), Mineral Oils, Resins (synthetic),
Shortenings (liquid), Solvents, Vegetable Oils (edible/non-edible)
Class 2 Medium Fluids (Viscosity 200 to 4,000 cps) Adhesives, Batters
(bakery), Drugs (fluid), Flavorings (ice cream), Food Fillings,
Purees, Sealers, Syrups, Trough Grease
Class 3 Medium Fluids (Viscosity 3,000 to 30,000 cps) Adhesives
(latex), Ceiling Coating (acoustical), Doughs, Food Flavorings, Inks,
Jams & Jellies, Sealers, Sound Deadeners, Syrups
Class 4 Medium Semi-Fluids (Viscosity non-measurable) Buffing
Compounds, Dough (heavy bakery), Drugs (semi-fluid), Food Products,
Inks (heavy), Resins (synthetic), Shortening (vegetable paste), Sound
Deadeners
Class 5 Heavy Semi-Fluids (Viscosity non-measurable) Caulk (gun
grade), Glues (dehydrated), Putty (light), Sealers (heavy)
Class 6 Extra-Heavy Semi-Fluids (Viscosity non-measurable) Cements
(plastic), Caulk (trowel grade), Caulk (tape), Sealers (trowel grade)
Wetted Material Seal Material Product #
Carbon Steel Buna 7835-C1, 7835-DTRI, 7886-A5, 7886-B, 7896-A5,
7222-B4, 7216-B
Carbon Steel Polyurethane & Buna N 7889-6, 7889-C, 7890-A, 7893-A
Carbon Steel Teflon 7835-DTRI
Carbon Steel Teflon & Nylon II 7216-4, 7216-A4
Carbon Steel Fluorocarbon & Nylon II 7222-B4
Stainless Steel Teflon 7216-S3, 7880-C1, 7835-SDTRI, 7886-S5,
7896-S5
NOTE: This information is for quick-reference only. There may be
additional information required to correctly recommend a unit and/or
system. For additional assistance, contact Alemite Technical Services.
Products
New Products
Lubrication Fittings
Grease Guns
Pumps
Centralized Lubrication Systems
Reels
Control Valves and Meters
Compressed Air Components
Fluid Management
Used Fluid Handling Equipment
Lubrication Accessories
Bulk Oil Systems
Quick Links
How to Buy
Product Literature and Service Sheets
Products / Pumps / Chemical and Material Handling
/ Class 1 & 2
Chemical and Material Handling : GT Pumps Class 1 Class 1
& 2 Class 1, 2 & 3 Class 2, 3 & 4 Class 3 & 4 Class 4
Class 5 & 6 Undercoating Pumps Diaphragm Pumps
Downtubes Electric Transfer Pumps Bushings
How to Buy
Class 1 & 2: Light to Medium Fluids (5 to 4,000 cp)
Alemite Class 1 & 2 Pumps are designed to handle light to medium
fluids such as inks, flavoring and oils. The double ball downtube
ensures positive priming for reliable operation. Recommended for
dispensing applications.
FEATURES:
* Stainless steel and carbon steel models are suitable for pumping
corrosive liquids
* Stub pumps require appropriate downtube
* Air inlet: 1/4"
RECOMMENDED ACCESSORIES:
* Single-Post Hoist (2741-4 or 2742-4) for models 7216-S3, 7216-4,
7880-C1
* Single-Post Hoist (2741-4 or 2742-4) requires Adapter Plate
(322593)
Images Product # Wetted Material Seal Material Drum Size Pump Ratio
Free Flow per min Cycles per gal. Material Inlet Material Outlet
Weight
7216-4 Carbon Steel Teflon & Nylon II 55 gal. 1:1 14 gal. 25 N/A 1"
NPTF(f) 14 lb.
7216-4
7216-A4 Carbon Steel Teflon & Nylon II 55 gal. 1:1 33 gal. 25 N/A 1"
NPTF (f) 18 lb.
7216-A4
7216-S3 Stainless Steel Teflon 55 gal. 1:1 14 gal. 25 1" NPTF (f) 1"
NPTF (f) 22 lb.
7216-S3
7216-B Carbon Steel Buna 55 gal. 2:1 7 gal. 32 N/A 3/8" NPTF (f) 18
lb.
7216-B
7222-B4 Carbon Steel Viton Stub 1:1 14 gal. 25 1-1/2" NPTF (f) 1" NPTF
(f) 12 lb.
7222-B4
7880-C1 Stainless Steel Teflon Stub 2.5:1 7 gal. 38 1" NPTF (f) 3/8"
NPTF (f) 14 lb.
7880-C1
WARNING! Always consult a MATERIAL COMPATIBILITY CHART to ensure that
the material being pumped and the cleaning product used for the pump
are compatible with the material composition of the pump and hose.
Products
New Products
Lubrication Fittings
Grease Guns
Pumps
Centralized Lubrication Systems
Reels
Control Valves and Meters
Compressed Air Components
Fluid Management
Used Fluid Handling Equipment
Lubrication Accessories
Bulk Oil Systems
Quick Links
How to Buy
Product Literature and Service Sheets
Products / Pumps / Oil Pumps / Medium Pressure
(Oil Pump) Selection Guide
Oil Pumps : Medium Pressure (Oil Pump) Selection Guide Manual
Oil Pumps Pneumatic Oil Pumps Downtubes Accessories
How to Buy
Medium Pressure (Oil Pump) Selection Guide
These air operated pumps are used to deliver motor oils, gear oils,
hydraulic oils and automatic transmission fluid (ATF) from origial
refinery drums or tanks. They are ideal for local or remote
installations where oil is piped to multiple hose outlets and/or
reels, metered outlets or portable service stations.
These rugged weatherproof units are available in Standard Duty, RAM,
and Heavy Duty to meet any pumping requirement. Models for use on 16
gallon drums mount to drum covers. 55-gallon drum models are available
with bung adapters, which screw directly into 2" bung holes on drums
and covers. Stub pumps are available for use in standard size and bulk
tanks equipped with 2" bung opening.
The chart below lists general medium-pressure pump selection
guidelihnes. Each application varies and should be carefully
considered for special conditions that may require a pump selection
other than the standard recommendations listed.
These conditions include, but are not limited to:
* Viscosity of product pumped
* Ambient temperature conditions
* Simultaneous operation of several dispensing outlets
* Dispensing volum requirements
When measuring total pump distance, the hose length of dispensing
reels should be included in total distance.
Pump distance (feet) Up to 10 ft. Up to 25 ft. Up to 75 ft. 75-200 ft.
Up to 200 ft. Over 200 ft. Over 300 ft.
Number of outlets 1 1 1-2 1-3 3+ 1-3 3+
16 gallon container N/A 9960-A 9960-A N/A N/A N/A N/A
55 gallon container (all rquire downtubes except 7216-4 and 9969-B)
7216-4*** 9918-A 9918-A*, 9969-B** 9969-B*, 9970** 7783-A4 9970* or
7783-A4** 7793-A1
Bulk container (these pumps require a downtube) 9916-A1 N/A 9918-A*,
9968**, 8568-A4 9968* or 9970** 7783-C4 7783-C4** 7793-C
Tubing recommendation (hydraulic fitting) 5/8" OD 0.035" Wall 5/8" OD
0.035" Wall 5/8" OD 0.035" Wall 5/8" OD 0.035" Wall 1" OD 0.049" Wall
1" OD 0.049" Wall 1" OD 0.049" Wall
* High volume transfer pump
** For pumping light fluids, e.g., ATF or hydraulic oil
*** For pumping heavy fluids, E.G., 10w 40 and gear oils
NOTE: For pumping Washer Fluid or 50/50 mix of Antifreeze and Water,
use 8202 or 7880-C1 regardless of pumping deistance & number of
outlets. For pumping non-petroleum based products, contact Alemite
Tech Service.
WARNING: Do not operate pump at higher pressure than lowest rated part
of system. Sever injury may result if pump is operated at pressures
greater than the lowest rated compononent in the distsribution system.
Keywords: Alemite Lubrication Systems, fluid handling, Parts and service kits.
Products ; Lubrication Accessories ; Pump Accessories ;Downtubes
