DIGITAL INTERVAL TIMER 10 MIN.-8 HR. W/SCROLL-UP
NSI / Tork Electrical, Lighting Pool & Spa Products and Replacement Parts
SPECIAL USE CONTROLS
DLC400BP DLC400BP
4 ZONE LIGHTING CONTROLLER
WITH INPUT FROM PHOTOSENSOR OR and
MEETS CALIFORNIA
BASED ON TIME OF DAY ENERGY COMMISSIONS ASHRAE
TITLE 24 REQUIREMENTS 90.1 1999
The DLC400BP is a multi-voltage, dedicated 4
and
inputCALIFORNIA
zone lighting controller with photocell MEETSCOMMISSIONS
ENERGY
in a ASHRAE
NEMA 3R enclosure. The unit has heavy24 REQUIREMENTS
TITLE duty 30 90.1 1999
Amp SPDT contacts, thereby eliminating the need MEETS ADA GUIDELINES
FOR CONTROLS &
for costly contactors in most applications. Each MECHANISMS 4.27.4
zone can be actuated by 1) the photosensor, or
MEETS ADA GUIDELINES
2) time of day, or 3) a combination of FOR CONTROLS &
both. Light
MECHANISMS 4.27.4
level settings at which loads turn ON and OFF as
well as time schedules are assigned independent-
ly to each zone, with the additional capability of
remote override inputs from external switches or
local override at the keypad.
30 AMP
3-POSITION SLIDE SWITCH FOR EACH ZONE:
Time of day ON, Time of day OFF
CONTACTS
Light Level ON, Time of day OFF
Light Level ON, Light Level OFF PHOTOSENSOR
MODEL EPC2 IS
SUPPLIED WITH
SPECIFICATIONS EACH UNIT
OPERATING TEMPERATURE: - 40 to +158F (- 40 to +70C.)
MEMORY MODULE can be programmed at any one
MM
POWER CONSUMPTION: 30 VA max
location and inserted into another DZS series unit
ENCLOSURE: Metal Indoor/Outdoor NEMA 3 is standard.
with MM socket in any other location!
SIZE: 1518H x 1318W x 3716D
MMP
(OPTIONAL) Windows-based program and optional
CONTACT
MEMORY MODULE PROGRAMMER can be used to
DLC 400BP RATINGS
program the memory module.
RATING
TYPE VOLTAGE NO NC
see page 23
General Purpose 24-277VAC, 30VDC 30A 30A
PERMANENT SCHEDULE RETENTION
Ballast 120-277VAC 20A 10A
Tungsten 120VAC 10A
Pilot Duty 120-277VAC 720VA 720VA
POWER CONNECTIONS FEATURES
WIRING N (L2) AC LINE INPUT LIGHT LEVEL ADJUSTMENT: 1-100 footcandles for ON and
DIAGRAM 120V
120V SELECT PROPER
TERMINALS
OFF independent for each zone
208-240V
208/240 (L1) AND APPLY ONE ASTRONOMIC:
VOLTAGE
277V
277V
1. Adjustable 10-60 Northern or Southern latitudes
5 L ZONE 1
2. Can be individually offset +/- 1-299 minutes from both
NC NO C
CH 1
6 N
sunset and sunrise times.
LOAD
7
HOLIDAYS: 1 to 24 individual dates
8 L ZONE 2
NC NO C
SEASONS: 1 to 4 with different daily schedules which can
CH 2
9 LOAD N
10 wrap around into the new year
11 L DAYLIGHT SAVING: Automatic adjustment (can be omitted).
NC NO C NC NO C
ZONE 3
LEAP YEAR: Automatic Compensation
CH 3
12 LOAD N
13 REMOTE OVERRIDE: Maintained dry contact closure or use
14 L ZONE 4 TORK Model SSA200R-24 for timed override
CH 4
15 LOAD N
LOCAL OVERRIDE: Until the next regularly scheduled ON or OFF.
16
Automatic operation then resumes.
POWER OUTAGE BACKUP: Permanent Schedule Retention.
AUXILIARY CONNECTIONS
Snap-in lithium battery maintains real time.
EPC2 24VDC
EPC2
PHOTOSENSOR REMOTE OVERRIDE OUTPUT
CATALOG UPC CLOCK INPUT ISOLATED CONTACTS
PHOTOSENSOR CH1 CH2 CH3 CH4 COM COM+24VDC GND
NO CODE 50/60H Z (UNPOWERED)
24VDC,
500mAmp output
SPST
[ DO NOT APPLY POWER
DO NOT
APPLY
DLC400BP 82191 120/(208-240)277V SPDT
POWER
Connect between COM and contact for specified channel MMP 82181 120V Memory Module Programmer
22 A DIVISION OF NSi INDUSTRIES, LLC
APPLICATION WIRING DIAGRAM
HIGH VOLTAGE SIDE
277V
CHANNEL 4 CHANNEL 3 CHANNEL 2 CHANNEL 1
208V/240V
120V
APPLICATION EXAMPLE: SHOPPING MALL
WITH FOUR ZONE NEEDS:
1 Common area lighting to be ON M-F from 8:30am
277V 208V/ 120V N 11:00pm, Saturday from 7:30am-11:30pm, and
240V
Sunday from 9:00am to 7:00pm.
GROUND 2 Sign Lighting needs to be ON from sunset
(astronomically) and OFF at midnight.
3 Parking lights need to be ON when ambient lighting
H
N drops to 5 footcandles (photocell) and OFF M-F at
ZONE ZONE ZONE ZONE
L
11:00pm, Saturday at midnight and Sunday at 8pm.
4
SECURITY
3
PARKING
2
SIGN
1
COMMON AREA
4 Securitylighting needs to be ON when ambient
N
LIGHTS LIGHTS LIGHTS LIGHTS lighting drops to 5 footcandles and can turn off at
10 footcandles.
All four lighting zones use TORK Model SSA200R-24
to provide timed override when an extension of time
EPC2
LOW VOLTAGE SIDE is required.
PHOTO SENSOR CH 1 CH 2 CH 3 CH 4 COM COM +24VDC GND
APPLICATION EXAMPLE USING OPTIONAL
SSA200R-24 FOR REMOTE TIMED OVERRIDE:
CH 1 Common area lighting may need to be overridden ON after
hours for a timed 2 hour period. The lighting will icker before turn-
BLUE
COMMON
BLUE
COMMON
BLUE
COMMON
BLUE
COMMON
off as a warning.
ORANGE NO CH 2 Sign lighting may need to be overridden ON after hours for a
ORANGE
ORANGE NO ORANGE RED timed 3 hour period. A beep warning will sound before turn-off.
NO NO CH 3 Parking lights may be needed after hours for a time period of
BLACK
2 hours. A beep warning will sound prior to the lights going OFF.
SSA200R-24
(CH1 OVERRIDE)
CH 4 Security lighting needs the capability of being overridden ON
SSA200R-24 after hours for a timed 2 hour period. A warning will occur before
(CH3 OVERRIDE)
SSA200R-24 SSA200R-24 turn--off.
(CH2 OVERRIDE) (CH4 OVERRIDE)
RED BLACK RED BLACK RED BLACK
ADDITIONAL EXAMPLES OF AREAS NEEDING
LIGHTING CONTROL:
INTERIOR LIGHTING EXTERIOR LIGHTING
Ofces Signs
MEMORY MODULE Hallways Security
PROGRAMMER Meeting Areas Canopy
(MMP) OPTIONAL
Sales Areas Parking Lot
Stock Rooms Show Windows
Warehouse
SPECIFICATION WRITERS GUIDE
DLC400BP
1. Furnish and install where noted a 4 zone lighting controller with photosensor 8. Enclosure shall provide separate wiring compartments for power connections
input (TORK model EPC2 photosensor to be supplied with controller). and auxiliary connections.
2. Memory Module shall be capable of being programmed at any one location 9. Controller shall be capable of local override ON or OFF to the next scheduled
and inserted into DLC400BP (with memory module socket) in any other remote event using the keypad for each zone.
location. 10. Each zone shall be capable of astronomic function, adjustable from 10 - 60
3. Optional programmer shall be available (Model MMP), capable of accom- degrees Northern or Southern latitude. Each zone can additionally be offset
plishing Windows based settings on a PC for easy duplication of Memory +/- 1299 minutes for both sunset and sunrise.
Modules or individualized programs for multiple locations 11. Controller shall provide automatic daylight saving time (which can be omitted).
4. Each zone shall be capable of independent, user settable turn-ON and turn- Leap year adjustment shall be compensated for automatically.
OFF light level set points ranging from 1 to 100 footcandles. 12. Controller shall have 365 day holiday capability with 24 single dates and 4
5. Three position slide switches shall be provided for each of the 4 zones allow- seasons of unlimited duration.
ing for user settings based on a) time of day or b) combination time of day + 13. Controller shall be capable of 99 set points with separate scheduling for each
light level or c) light level. day of the week.
6. Controller shall provide 30 Amp General Purpose isolated contacts (unpowered) 14. Controller shall have back-up capability: a) Schedule shall be retained for 40
for each zone as well as a 500 ma, 24VDC output. years without power, b) real time shall be retained for 6 months using a eld
7. Controller shall have 1 digital input per channel for: a) remote contact closure replaceable 9V lithium battery.
which can be used to turn corresponding outputs ON/OFF outside of the nor- 15. Unit shall have a NEMA type 3, metal indoor/outdoor enclosure.
mal control time or b) remote timed override which can be accomplished for 16. Controller shall be capable of being congured to copy to multiple memory
the corresponding outputs with the use of TORK model SSA200R-24. modules.
17. Specify TORK model DLC400BP.
JUNE 2007 A DIVISION OF NSi INDUSTRIES, LLC
23
APPLICATION WIRING DIAGRAM
HIGH VOLTAGE SIDE
277V
CHANNEL 4 CHANNEL 3 CHANNEL 2 CHANNEL 1
208V/240V
120V
APPLICATION EXAMPLE: SHOPPING MALL
WITH FOUR ZONE NEEDS:
1 Common area lighting to be ON M-F from 8:30am
277V 208V/ 120V N 11:00pm, Saturday from 7:30am-11:30pm, and
240V
Sunday from 9:00am to 7:00pm.
GROUND 2 Sign Lighting needs to be ON from sunset
(astronomically) and OFF at midnight.
3 Parking lights need to be ON when ambient lighting
H
N drops to 5 footcandles (photocell) and OFF M-F at
ZONE ZONE ZONE ZONE
L
11:00pm, Saturday at midnight and Sunday at 8pm.
4
SECURITY
3
PARKING
2
SIGN
1
COMMON AREA
4 Securitylighting needs to be ON when ambient
N
LIGHTS LIGHTS LIGHTS LIGHTS lighting drops to 5 footcandles and can turn off at
10 footcandles.
All four lighting zones use TORK Model SSA200R-24
to provide timed override when an extension of time
EPC2
LOW VOLTAGE SIDE is required.
PHOTO SENSOR CH 1 CH 2 CH 3 CH 4 COM COM +24VDC GND
APPLICATION EXAMPLE USING OPTIONAL
SSA200R-24 FOR REMOTE TIMED OVERRIDE:
CH 1 Common area lighting may need to be overridden ON after
hours for a timed 2 hour period. The lighting will icker before turn-
BLUE
COMMON
BLUE
COMMON
BLUE
COMMON
BLUE
COMMON
off as a warning.
ORANGE NO CH 2 Sign lighting may need to be overridden ON after hours for a
ORANGE
ORANGE NO ORANGE RED timed 3 hour period. A beep warning will sound before turn-off.
NO NO CH 3 Parking lights may be needed after hours for a time period of
BLACK
2 hours. A beep warning will sound prior to the lights going OFF.
SSA200R-24
(CH1 OVERRIDE)
CH 4 Security lighting needs the capability of being overridden ON
SSA200R-24 after hours for a timed 2 hour period. A warning will occur before
(CH3 OVERRIDE)
SSA200R-24 SSA200R-24 turn--off.
(CH2 OVERRIDE) (CH4 OVERRIDE)
RED BLACK RED BLACK RED BLACK
ADDITIONAL EXAMPLES OF AREAS NEEDING
LIGHTING CONTROL:
INTERIOR LIGHTING EXTERIOR LIGHTING
Ofces Signs
MEMORY MODULE Hallways Security
PROGRAMMER Meeting Areas Canopy
(MMP) OPTIONAL
Sales Areas Parking Lot
Stock Rooms Show Windows
Warehouse
SPECIFICATION WRITERS GUIDE
DLC400BP
1. Furnish and install where noted a 4 zone lighting controller with photosensor 8. Enclosure shall provide separate wiring compartments for power connections
input (TORK model EPC2 photosensor to be supplied with controller). and auxiliary connections.
2. Memory Module shall be capable of being programmed at any one location 9. Controller shall be capable of local override ON or OFF to the next scheduled
and inserted into DLC400BP (with memory module socket) in any other remote event using the keypad for each zone.
location. 10. Each zone shall be capable of astronomic function, adjustable from 10 - 60
3. Optional programmer shall be available (Model MMP), capable of accom- degrees Northern or Southern latitude. Each zone can additionally be offset
plishing Windows based settings on a PC for easy duplication of Memory +/- 1299 minutes for both sunset and sunrise.
Modules or individualized programs for multiple locations 11. Controller shall provide automatic daylight saving time (which can be omitted).
4. Each zone shall be capable of independent, user settable turn-ON and turn- Leap year adjustment shall be compensated for automatically.
OFF light level set points ranging from 1 to 100 footcandles. 12. Controller shall have 365 day holiday capability with 24 single dates and 4
5. Three position slide switches shall be provided for each of the 4 zones allow- seasons of unlimited duration.
ing for user settings based on a) time of day or b) combination time of day + 13. Controller shall be capable of 99 set points with separate scheduling for each
light level or c) light level. day of the week.
6. Controller shall provide 30 Amp General Purpose isolated contacts (unpowered) 14. Controller shall have back-up capability: a) Schedule shall be retained for 40
for each zone as well as a 500 ma, 24VDC output. years without power, b) real time shall be retained for 6 months using a eld
7. Controller shall have 1 digital input per channel for: a) remote contact closure replaceable 9V lithium battery.
which can be used to turn corresponding outputs ON/OFF outside of the nor- 15. Unit shall have a NEMA type 3, metal indoor/outdoor enclosure.
mal control time or b) remote timed override which can be accomplished for 16. Controller shall be capable of being congured to copy to multiple memory
the corresponding outputs with the use of TORK model SSA200R-24. modules.
17. Specify TORK model DLC400BP.
JUNE 2007 A DIVISION OF NSi INDUSTRIES, LLC
23
APPLICATION WIRING DIAGRAM
HIGH VOLTAGE SIDE
277V
CHANNEL 4 CHANNEL 3 CHANNEL 2 CHANNEL 1
208V/240V
120V
APPLICATION EXAMPLE: SHOPPING MALL
WITH FOUR ZONE NEEDS:
1 Common area lighting to be ON M-F from 8:30am
277V 208V/ 120V N 11:00pm, Saturday from 7:30am-11:30pm, and
240V
Sunday from 9:00am to 7:00pm.
GROUND 2 Sign Lighting needs to be ON from sunset
(astronomically) and OFF at midnight.
3 Parking lights need to be ON when ambient lighting
H
N drops to 5 footcandles (photocell) and OFF M-F at
ZONE ZONE ZONE ZONE
L
11:00pm, Saturday at midnight and Sunday at 8pm.
4
SECURITY
3
PARKING
2
SIGN
1
COMMON AREA
4 Securitylighting needs to be ON when ambient
N
LIGHTS LIGHTS LIGHTS LIGHTS lighting drops to 5 footcandles and can turn off at
10 footcandles.
All four lighting zones use TORK Model SSA200R-24
to provide timed override when an extension of time
EPC2
LOW VOLTAGE SIDE is required.
PHOTO SENSOR CH 1 CH 2 CH 3 CH 4 COM COM +24VDC GND
APPLICATION EXAMPLE USING OPTIONAL
SSA200R-24 FOR REMOTE TIMED OVERRIDE:
CH 1 Common area lighting may need to be overridden ON after
hours for a timed 2 hour period. The lighting will icker before turn-
BLUE
COMMON
BLUE
COMMON
BLUE
COMMON
BLUE
COMMON
off as a warning.
ORANGE NO CH 2 Sign lighting may need to be overridden ON after hours for a
ORANGE
ORANGE NO ORANGE RED timed 3 hour period. A beep warning will sound before turn-off.
NO NO CH 3 Parking lights may be needed after hours for a time period of
BLACK
2 hours. A beep warning will sound prior to the lights going OFF.
SSA200R-24
(CH1 OVERRIDE)
CH 4 Security lighting needs the capability of being overridden ON
SSA200R-24 after hours for a timed 2 hour period. A warning will occur before
(CH3 OVERRIDE)
SSA200R-24 SSA200R-24 turn--off.
(CH2 OVERRIDE) (CH4 OVERRIDE)
RED BLACK RED BLACK RED BLACK
ADDITIONAL EXAMPLES OF AREAS NEEDING
LIGHTING CONTROL:
INTERIOR LIGHTING EXTERIOR LIGHTING
Ofces Signs
MEMORY MODULE Hallways Security
PROGRAMMER Meeting Areas Canopy
(MMP) OPTIONAL
Sales Areas Parking Lot
Stock Rooms Show Windows
Warehouse
SPECIFICATION WRITERS GUIDE
DLC400BP
1. Furnish and install where noted a 4 zone lighting controller with photosensor 8. Enclosure shall provide separate wiring compartments for power connections
input (TORK model EPC2 photosensor to be supplied with controller). and auxiliary connections.
2. Memory Module shall be capable of being programmed at any one location 9. Controller shall be capable of local override ON or OFF to the next scheduled
and inserted into DLC400BP (with memory module socket) in any other remote event using the keypad for each zone.
location. 10. Each zone shall be capable of astronomic function, adjustable from 10 - 60
3. Optional programmer shall be available (Model MMP), capable of accom- degrees Northern or Southern latitude. Each zone can additionally be offset
plishing Windows based settings on a PC for easy duplication of Memory +/- 1299 minutes for both sunset and sunrise.
Modules or individualized programs for multiple locations 11. Controller shall provide automatic daylight saving time (which can be omitted).
4. Each zone shall be capable of independent, user settable turn-ON and turn- Leap year adjustment shall be compensated for automatically.
OFF light level set points ranging from 1 to 100 footcandles. 12. Controller shall have 365 day holiday capability with 24 single dates and 4
5. Three position slide switches shall be provided for each of the 4 zones allow- seasons of unlimited duration.
ing for user settings based on a) time of day or b) combination time of day + 13. Controller shall be capable of 99 set points with separate scheduling for each
light level or c) light level. day of the week.
6. Controller shall provide 30 Amp General Purpose isolated contacts (unpowered) 14. Controller shall have back-up capability: a) Schedule shall be retained for 40
for each zone as well as a 500 ma, 24VDC output. years without power, b) real time shall be retained for 6 months using a eld
7. Controller shall have 1 digital input per channel for: a) remote contact closure replaceable 9V lithium battery.
which can be used to turn corresponding outputs ON/OFF outside of the nor- 15. Unit shall have a NEMA type 3, metal indoor/outdoor enclosure.
mal control time or b) remote timed override which can be accomplished for 16. Controller shall be capable of being congured to copy to multiple memory
the corresponding outputs with the use of TORK model SSA200R-24. modules.
17. Specify TORK model DLC400BP.
JUNE 2007 A DIVISION OF NSi INDUSTRIES, LLC
23
APPLICATION WIRING DIAGRAM
HIGH VOLTAGE SIDE
277V
CHANNEL 4 CHANNEL 3 CHANNEL 2 CHANNEL 1
208V/240V
120V
APPLICATION EXAMPLE: SHOPPING MALL
WITH FOUR ZONE NEEDS:
1 Common area lighting to be ON M-F from 8:30am
277V 208V/ 120V N 11:00pm, Saturday from 7:30am-11:30pm, and
240V
Sunday from 9:00am to 7:00pm.
GROUND 2 Sign Lighting needs to be ON from sunset
(astronomically) and OFF at midnight.
3 Parking lights need to be ON when ambient lighting
H
N drops to 5 footcandles (photocell) and OFF M-F at
ZONE ZONE ZONE ZONE
L
11:00pm, Saturday at midnight and Sunday at 8pm.
4
SECURITY
3
PARKING
2
SIGN
1
COMMON AREA
4 Securitylighting needs to be ON when ambient
N
LIGHTS LIGHTS LIGHTS LIGHTS lighting drops to 5 footcandles and can turn off at
10 footcandles.
All four lighting zones use TORK Model SSA200R-24
to provide timed override when an extension of time
EPC2
LOW VOLTAGE SIDE is required.
PHOTO SENSOR CH 1 CH 2 CH 3 CH 4 COM COM +24VDC GND
APPLICATION EXAMPLE USING OPTIONAL
SSA200R-24 FOR REMOTE TIMED OVERRIDE:
CH 1 Common area lighting may need to be overridden ON after
hours for a timed 2 hour period. The lighting will icker before turn-
BLUE
COMMON
BLUE
COMMON
BLUE
COMMON
BLUE
COMMON
off as a warning.
ORANGE NO CH 2 Sign lighting may need to be overridden ON after hours for a
ORANGE
ORANGE NO ORANGE RED timed 3 hour period. A beep warning will sound before turn-off.
NO NO CH 3 Parking lights may be needed after hours for a time period of
BLACK
2 hours. A beep warning will sound prior to the lights going OFF.
SSA200R-24
(CH1 OVERRIDE)
CH 4 Security lighting needs the capability of being overridden ON
SSA200R-24 after hours for a timed 2 hour period. A warning will occur before
(CH3 OVERRIDE)
SSA200R-24 SSA200R-24 turn--off.
(CH2 OVERRIDE) (CH4 OVERRIDE)
RED BLACK RED BLACK RED BLACK
ADDITIONAL EXAMPLES OF AREAS NEEDING
LIGHTING CONTROL:
INTERIOR LIGHTING EXTERIOR LIGHTING
Ofces Signs
MEMORY MODULE Hallways Security
PROGRAMMER Meeting Areas Canopy
(MMP) OPTIONAL
Sales Areas Parking Lot
Stock Rooms Show Windows
Warehouse
SPECIFICATION WRITERS GUIDE
DLC400BP
1. Furnish and install where noted a 4 zone lighting controller with photosensor 8. Enclosure shall provide separate wiring compartments for power connections
input (TORK model EPC2 photosensor to be supplied with controller). and auxiliary connections.
2. Memory Module shall be capable of being programmed at any one location 9. Controller shall be capable of local override ON or OFF to the next scheduled
and inserted into DLC400BP (with memory module socket) in any other remote event using the keypad for each zone.
location. 10. Each zone shall be capable of astronomic function, adjustable from 10 - 60
3. Optional programmer shall be available (Model MMP), capable of accom- degrees Northern or Southern latitude. Each zone can additionally be offset
plishing Windows based settings on a PC for easy duplication of Memory +/- 1299 minutes for both sunset and sunrise.
Modules or individualized programs for multiple locations 11. Controller shall provide automatic daylight saving time (which can be omitted).
4. Each zone shall be capable of independent, user settable turn-ON and turn- Leap year adjustment shall be compensated for automatically.
OFF light level set points ranging from 1 to 100 footcandles. 12. Controller shall have 365 day holiday capability with 24 single dates and 4
5. Three position slide switches shall be provided for each of the 4 zones allow- seasons of unlimited duration.
ing for user settings based on a) time of day or b) combination time of day + 13. Controller shall be capable of 99 set points with separate scheduling for each
light level or c) light level. day of the week.
6. Controller shall provide 30 Amp General Purpose isolated contacts (unpowered) 14. Controller shall have back-up capability: a) Schedule shall be retained for 40
for each zone as well as a 500 ma, 24VDC output. years without power, b) real time shall be retained for 6 months using a eld
7. Controller shall have 1 digital input per channel for: a) remote contact closure replaceable 9V lithium battery.
which can be used to turn corresponding outputs ON/OFF outside of the nor- 15. Unit shall have a NEMA type 3, metal indoor/outdoor enclosure.
mal control time or b) remote timed override which can be accomplished for 16. Controller shall be capable of being congured to copy to multiple memory
the corresponding outputs with the use of TORK model SSA200R-24. modules.
17. Specify TORK model DLC400BP.
JUNE 2007 A DIVISION OF NSi INDUSTRIES, LLC
23
APPLICATION WIRING DIAGRAM
HIGH VOLTAGE SIDE
277V
CHANNEL 4 CHANNEL 3 CHANNEL 2 CHANNEL 1
208V/240V
120V
APPLICATION EXAMPLE: SHOPPING MALL
WITH FOUR ZONE NEEDS:
1 Common area lighting to be ON M-F from 8:30am
277V 208V/ 120V N 11:00pm, Saturday from 7:30am-11:30pm, and
240V
Sunday from 9:00am to 7:00pm.
GROUND 2 Sign Lighting needs to be ON from sunset
(astronomically) and OFF at midnight.
3 Parking lights need to be ON when ambient lighting
H
N drops to 5 footcandles (photocell) and OFF M-F at
ZONE ZONE ZONE ZONE
L
11:00pm, Saturday at midnight and Sunday at 8pm.
4
SECURITY
3
PARKING
2
SIGN
1
COMMON AREA
4 Securitylighting needs to be ON when ambient
N
LIGHTS LIGHTS LIGHTS LIGHTS lighting drops to 5 footcandles and can turn off at
10 footcandles.
All four lighting zones use TORK Model SSA200R-24
to provide timed override when an extension of time
EPC2
LOW VOLTAGE SIDE is required.
PHOTO SENSOR CH 1 CH 2 CH 3 CH 4 COM COM +24VDC GND
APPLICATION EXAMPLE USING OPTIONAL
SSA200R-24 FOR REMOTE TIMED OVERRIDE:
CH 1 Common area lighting may need to be overridden ON after
hours for a timed 2 hour period. The lighting will icker before turn-
BLUE
COMMON
BLUE
COMMON
BLUE
COMMON
BLUE
COMMON
off as a warning.
ORANGE NO CH 2 Sign lighting may need to be overridden ON after hours for a
ORANGE
ORANGE NO ORANGE RED timed 3 hour period. A beep warning will sound before turn-off.
NO NO CH 3 Parking lights may be needed after hours for a time period of
BLACK
2 hours. A beep warning will sound prior to the lights going OFF.
SSA200R-24
(CH1 OVERRIDE)
CH 4 Security lighting needs the capability of being overridden ON
SSA200R-24 after hours for a timed 2 hour period. A warning will occur before
(CH3 OVERRIDE)
SSA200R-24 SSA200R-24 turn--off.
(CH2 OVERRIDE) (CH4 OVERRIDE)
RED BLACK RED BLACK RED BLACK
ADDITIONAL EXAMPLES OF AREAS NEEDING
LIGHTING CONTROL:
INTERIOR LIGHTING EXTERIOR LIGHTING
Ofces Signs
MEMORY MODULE Hallways Security
PROGRAMMER Meeting Areas Canopy
(MMP) OPTIONAL
Sales Areas Parking Lot
Stock Rooms Show Windows
Warehouse
SPECIFICATION WRITERS GUIDE
DLC400BP
1. Furnish and install where noted a 4 zone lighting controller with photosensor 8. Enclosure shall provide separate wiring compartments for power connections
input (TORK model EPC2 photosensor to be supplied with controller). and auxiliary connections.
2. Memory Module shall be capable of being programmed at any one location 9. Controller shall be capable of local override ON or OFF to the next scheduled
and inserted into DLC400BP (with memory module socket) in any other remote event using the keypad for each zone.
location. 10. Each zone shall be capable of astronomic function, adjustable from 10 - 60
3. Optional programmer shall be available (Model MMP), capable of accom- degrees Northern or Southern latitude. Each zone can additionally be offset
plishing Windows based settings on a PC for easy duplication of Memory +/- 1299 minutes for both sunset and sunrise.
Modules or individualized programs for multiple locations 11. Controller shall provide automatic daylight saving time (which can be omitted).
4. Each zone shall be capable of independent, user settable turn-ON and turn- Leap year adjustment shall be compensated for automatically.
OFF light level set points ranging from 1 to 100 footcandles. 12. Controller shall have 365 day holiday capability with 24 single dates and 4
5. Three position slide switches shall be provided for each of the 4 zones allow- seasons of unlimited duration.
ing for user settings based on a) time of day or b) combination time of day + 13. Controller shall be capable of 99 set points with separate scheduling for each
light level or c) light level. day of the week.
6. Controller shall provide 30 Amp General Purpose isolated contacts (unpowered) 14. Controller shall have back-up capability: a) Schedule shall be retained for 40
for each zone as well as a 500 ma, 24VDC output. years without power, b) real time shall be retained for 6 months using a eld
7. Controller shall have 1 digital input per channel for: a) remote contact closure replaceable 9V lithium battery.
which can be used to turn corresponding outputs ON/OFF outside of the nor- 15. Unit shall have a NEMA type 3, metal indoor/outdoor enclosure.
mal control time or b) remote timed override which can be accomplished for 16. Controller shall be capable of being congured to copy to multiple memory
the corresponding outputs with the use of TORK model SSA200R-24. modules.
17. Specify TORK model DLC400BP.
JUNE 2007 A DIVISION OF NSi INDUSTRIES, LLC
23
APPLICATION WIRING DIAGRAM
HIGH VOLTAGE SIDE
277V
CHANNEL 4 CHANNEL 3 CHANNEL 2 CHANNEL 1
208V/240V
120V
APPLICATION EXAMPLE: SHOPPING MALL
WITH FOUR ZONE NEEDS:
1 Common area lighting to be ON M-F from 8:30am
277V 208V/ 120V N 11:00pm, Saturday from 7:30am-11:30pm, and
240V
Sunday from 9:00am to 7:00pm.
GROUND 2 Sign Lighting needs to be ON from sunset
(astronomically) and OFF at midnight.
3 Parking lights need to be ON when ambient lighting
H
N drops to 5 footcandles (photocell) and OFF M-F at
ZONE ZONE ZONE ZONE
L
11:00pm, Saturday at midnight and Sunday at 8pm.
4
SECURITY
3
PARKING
2
SIGN
1
COMMON AREA
4 Securitylighting needs to be ON when ambient
N
LIGHTS LIGHTS LIGHTS LIGHTS lighting drops to 5 footcandles and can turn off at
10 footcandles.
All four lighting zones use TORK Model SSA200R-24
to provide timed override when an extension of time
EPC2
LOW VOLTAGE SIDE is required.
PHOTO SENSOR CH 1 CH 2 CH 3 CH 4 COM COM +24VDC GND
APPLICATION EXAMPLE USING OPTIONAL
SSA200R-24 FOR REMOTE TIMED OVERRIDE:
CH 1 Common area lighting may need to be overridden ON after
hours for a timed 2 hour period. The lighting will icker before turn-
BLUE
COMMON
BLUE
COMMON
BLUE
COMMON
BLUE
COMMON
off as a warning.
ORANGE NO CH 2 Sign lighting may need to be overridden ON after hours for a
ORANGE
ORANGE NO ORANGE RED timed 3 hour period. A beep warning will sound before turn-off.
NO NO CH 3 Parking lights may be needed after hours for a time period of
BLACK
2 hours. A beep warning will sound prior to the lights going OFF.
SSA200R-24
(CH1 OVERRIDE)
CH 4 Security lighting needs the capability of being overridden ON
SSA200R-24 after hours for a timed 2 hour period. A warning will occur before
(CH3 OVERRIDE)
SSA200R-24 SSA200R-24 turn--off.
(CH2 OVERRIDE) (CH4 OVERRIDE)
RED BLACK RED BLACK RED BLACK
ADDITIONAL EXAMPLES OF AREAS NEEDING
LIGHTING CONTROL:
INTERIOR LIGHTING EXTERIOR LIGHTING
Ofces Signs
MEMORY MODULE Hallways Security
PROGRAMMER Meeting Areas Canopy
(MMP) OPTIONAL
Sales Areas Parking Lot
Stock Rooms Show Windows
Warehouse
SPECIFICATION WRITERS GUIDE
DLC400BP
1. Furnish and install where noted a 4 zone lighting controller with photosensor 8. Enclosure shall provide separate wiring compartments for power connections
input (TORK model EPC2 photosensor to be supplied with controller). and auxiliary connections.
2. Memory Module shall be capable of being programmed at any one location 9. Controller shall be capable of local override ON or OFF to the next scheduled
and inserted into DLC400BP (with memory module socket) in any other remote event using the keypad for each zone.
location. 10. Each zone shall be capable of astronomic function, adjustable from 10 - 60
3. Optional programmer shall be available (Model MMP), capable of accom- degrees Northern or Southern latitude. Each zone can additionally be offset
plishing Windows based settings on a PC for easy duplication of Memory +/- 1299 minutes for both sunset and sunrise.
Modules or individualized programs for multiple locations 11. Controller shall provide automatic daylight saving time (which can be omitted).
4. Each zone shall be capable of independent, user settable turn-ON and turn- Leap year adjustment shall be compensated for automatically.
OFF light level set points ranging from 1 to 100 footcandles. 12. Controller shall have 365 day holiday capability with 24 single dates and 4
5. Three position slide switches shall be provided for each of the 4 zones allow- seasons of unlimited duration.
ing for user settings based on a) time of day or b) combination time of day + 13. Controller shall be capable of 99 set points with separate scheduling for each
light level or c) light level. day of the week.
6. Controller shall provide 30 Amp General Purpose isolated contacts (unpowered) 14. Controller shall have back-up capability: a) Schedule shall be retained for 40
for each zone as well as a 500 ma, 24VDC output. years without power, b) real time shall be retained for 6 months using a eld
7. Controller shall have 1 digital input per channel for: a) remote contact closure replaceable 9V lithium battery.
which can be used to turn corresponding outputs ON/OFF outside of the nor- 15. Unit shall have a NEMA type 3, metal indoor/outdoor enclosure.
mal control time or b) remote timed override which can be accomplished for 16. Controller shall be capable of being congured to copy to multiple memory
the corresponding outputs with the use of TORK model SSA200R-24. modules.
17. Specify TORK model DLC400BP.
JUNE 2007 A DIVISION OF NSi INDUSTRIES, LLC
23
TIMERS
SSA SERIES SSA100
DIGITAL ELITE TIMERS SSA200
8 TIMERS IN ONE!
SSA200R-24
APPLICATIONS: SSA100 AND SSA200
For energy savings to control lighting or motor loads where an occupancy sensor is not suitable.
Fluorescent and incandescent lighting in areas such as ofces, meeting rooms, library aisles,
stock rooms, equipment rooms.
Timed override of lighting and HVAC for after hours cleaning crews.
Exhaust fans in work areas, utility rooms, bathrooms.
Hot tub heaters and circulating pumps.
Timed override of loads controlled by electromechanical or digital time switches.
APPLICATIONS: SSA200R-24
Interfaces with low voltage HVAC and lighting control systems.
Switches 20 Amp uorescent and incandescent lighting when operated with TORK
TRP transformer relay powerpacks.
Provides switching for loads controlled by BAS/EMS building management systems.
Provides timed override of lighting and HVAC for after hours use.
and
MEETS Can be overridden ON or OFF from remote locations using simple momentary switches.
CALIFORNIA
ENERGY COMMISSIONS ASHRAE
TITLE 24 REQUIREMENTS 90.1 1999
MEETS ADA GUIDELINES CAN INTERFACE WITH LOW VOLTAGE SYSTEMS
FOR CONTROLS &
MECHANISMS 4.27.4 REMOTE OVERRIDE VIA SIMPLE PUSHBUTTONS
FEATURES: ALL SSA MODELS before time out (either or both can be disabled).
Liquid Crystal Display stands out strongly in lighted areas See specications below for details.
and is electroluminescent backlit for dark areas. No minimum load required.
Tamper resistant time-on interval can be preset. In addition, a White decorator type face with matching wallplate
manual scroll-up mode (in 10 minute intervals) can override included.
the dip switch setting temporarily this feature can be dis-
abled, providing a xed interval timer. SSA100, SSA200 ALSO FEATURE:
In addition to numerical read-out LCD displays 10 bars at Zero Power switching prolongs life of relay contacts by
start of time on period. As interval counts down, one bar switching high inrush equipment at or close to zero power.
at a time turns off in 10% decrements. Compatible with electronic ballasts, incandescent lighting,
Flicker of lights and/or beep warning begins 2 minutes or motor loads.
EASY INSTALLATION One simple pushbutton on the face can then do the following:
Easy installation; ts standard 212 wallbox.
Easily replaces wall switch in existing installation.
For use in single or multi-gang applications. 1 Push momentarily and the load comes on for the preset
interval.
White decorator wallplate included.
DIP SWITCH # 1 2 3
5 MIN
DIP SWITCH # 4 5 6
FLICKER ON
At the time of installation, 2 Push momentarily while the load is on and it will turn
off.
15 MIN DIP SWITCH # FLICKER OFF a preset time-on interval
30 MIN 1 2 3 4 5 6 BEEPER ON
and other features are
3 Hold thethe timer resets for 1 or 2original preset interval. is
pushbutton in seconds while the load
1 HR BEEPER OFF
3 HR SCROLL ON selected using a set of dip
6 HR 1 2 3 4 5 6
SCROLL OFF switches. on and up to its
9 HR
12 HR
4 Hold the pushbutton in 10 minutes to its maximum setting.
begins to scroll up from
for over 3 seconds and the timer
NOTE: This feature can be disabled using a tamper resistant dip switch,
providing a xed interval timer. Timing on this chart (above) is for
SSA100 Unit.
32 A DIVISION OF NSi INDUSTRIES, LLC
TIMERS
SSA SERIES SSA100
DIGITAL ELITE TIMERS SSA200
8 TIMERS IN ONE!
SSA200R-24
APPLICATIONS: SSA100 AND SSA200
For energy savings to control lighting or motor loads where an occupancy sensor is not suitable.
Fluorescent and incandescent lighting in areas such as ofces, meeting rooms, library aisles,
stock rooms, equipment rooms.
Timed override of lighting and HVAC for after hours cleaning crews.
Exhaust fans in work areas, utility rooms, bathrooms.
Hot tub heaters and circulating pumps.
Timed override of loads controlled by electromechanical or digital time switches.
APPLICATIONS: SSA200R-24
Interfaces with low voltage HVAC and lighting control systems.
Switches 20 Amp uorescent and incandescent lighting when operated with TORK
TRP transformer relay powerpacks.
Provides switching for loads controlled by BAS/EMS building management systems.
Provides timed override of lighting and HVAC for after hours use.
and
MEETS Can be overridden ON or OFF from remote locations using simple momentary switches.
CALIFORNIA
ENERGY COMMISSIONS ASHRAE
TITLE 24 REQUIREMENTS 90.1 1999
MEETS ADA GUIDELINES CAN INTERFACE WITH LOW VOLTAGE SYSTEMS
FOR CONTROLS &
MECHANISMS 4.27.4 REMOTE OVERRIDE VIA SIMPLE PUSHBUTTONS
FEATURES: ALL SSA MODELS before time out (either or both can be disabled).
Liquid Crystal Display stands out strongly in lighted areas See specications below for details.
and is electroluminescent backlit for dark areas. No minimum load required.
Tamper resistant time-on interval can be preset. In addition, a White decorator type face with matching wallplate
manual scroll-up mode (in 10 minute intervals) can override included.
the dip switch setting temporarily this feature can be dis-
abled, providing a xed interval timer. SSA100, SSA200 ALSO FEATURE:
In addition to numerical read-out LCD displays 10 bars at Zero Power switching prolongs life of relay contacts by
start of time on period. As interval counts down, one bar switching high inrush equipment at or close to zero power.
at a time turns off in 10% decrements. Compatible with electronic ballasts, incandescent lighting,
Flicker of lights and/or beep warning begins 2 minutes or motor loads.
EASY INSTALLATION One simple pushbutton on the face can then do the following:
Easy installation; ts standard 212 wallbox.
Easily replaces wall switch in existing installation.
For use in single or multi-gang applications. 1 Push momentarily and the load comes on for the preset
interval.
White decorator wallplate included.
DIP SWITCH # 1 2 3
5 MIN
DIP SWITCH # 4 5 6
FLICKER ON
At the time of installation, 2 Push momentarily while the load is on and it will turn
off.
15 MIN DIP SWITCH # FLICKER OFF a preset time-on interval
30 MIN 1 2 3 4 5 6 BEEPER ON
and other features are
3 Hold thethe timer resets for 1 or 2original preset interval. is
pushbutton in seconds while the load
1 HR BEEPER OFF
3 HR SCROLL ON selected using a set of dip
6 HR 1 2 3 4 5 6
SCROLL OFF switches. on and up to its
9 HR
12 HR
4 Hold the pushbutton in 10 minutes to its maximum setting.
begins to scroll up from
for over 3 seconds and the timer
NOTE: This feature can be disabled using a tamper resistant dip switch,
providing a xed interval timer. Timing on this chart (above) is for
SSA100 Unit.
32 A DIVISION OF NSi INDUSTRIES, LLC
TIMERS
SSA SERIES SSA100
DIGITAL ELITE TIMERS SSA200
8 TIMERS IN ONE!
SSA200R-24
APPLICATIONS: SSA100 AND SSA200
For energy savings to control lighting or motor loads where an occupancy sensor is not suitable.
Fluorescent and incandescent lighting in areas such as ofces, meeting rooms, library aisles,
stock rooms, equipment rooms.
Timed override of lighting and HVAC for after hours cleaning crews.
Exhaust fans in work areas, utility rooms, bathrooms.
Hot tub heaters and circulating pumps.
Timed override of loads controlled by electromechanical or digital time switches.
APPLICATIONS: SSA200R-24
Interfaces with low voltage HVAC and lighting control systems.
Switches 20 Amp uorescent and incandescent lighting when operated with TORK
TRP transformer relay powerpacks.
Provides switching for loads controlled by BAS/EMS building management systems.
Provides timed override of lighting and HVAC for after hours use.
and
MEETS Can be overridden ON or OFF from remote locations using simple momentary switches.
CALIFORNIA
ENERGY COMMISSIONS ASHRAE
TITLE 24 REQUIREMENTS 90.1 1999
MEETS ADA GUIDELINES CAN INTERFACE WITH LOW VOLTAGE SYSTEMS
FOR CONTROLS &
MECHANISMS 4.27.4 REMOTE OVERRIDE VIA SIMPLE PUSHBUTTONS
FEATURES: ALL SSA MODELS before time out (either or both can be disabled).
Liquid Crystal Display stands out strongly in lighted areas See specications below for details.
and is electroluminescent backlit for dark areas. No minimum load required.
Tamper resistant time-on interval can be preset. In addition, a White decorator type face with matching wallplate
manual scroll-up mode (in 10 minute intervals) can override included.
the dip switch setting temporarily this feature can be dis-
abled, providing a xed interval timer. SSA100, SSA200 ALSO FEATURE:
In addition to numerical read-out LCD displays 10 bars at Zero Power switching prolongs life of relay contacts by
start of time on period. As interval counts down, one bar switching high inrush equipment at or close to zero power.
at a time turns off in 10% decrements. Compatible with electronic ballasts, incandescent lighting,
Flicker of lights and/or beep warning begins 2 minutes or motor loads.
EASY INSTALLATION One simple pushbutton on the face can then do the following:
Easy installation; ts standard 212 wallbox.
Easily replaces wall switch in existing installation.
For use in single or multi-gang applications. 1 Push momentarily and the load comes on for the preset
interval.
White decorator wallplate included.
DIP SWITCH # 1 2 3
5 MIN
DIP SWITCH # 4 5 6
FLICKER ON
At the time of installation, 2 Push momentarily while the load is on and it will turn
off.
15 MIN DIP SWITCH # FLICKER OFF a preset time-on interval
30 MIN 1 2 3 4 5 6 BEEPER ON
and other features are
3 Hold thethe timer resets for 1 or 2original preset interval. is
pushbutton in seconds while the load
1 HR BEEPER OFF
3 HR SCROLL ON selected using a set of dip
6 HR 1 2 3 4 5 6
SCROLL OFF switches. on and up to its
9 HR
12 HR
4 Hold the pushbutton in 10 minutes to its maximum setting.
begins to scroll up from
for over 3 seconds and the timer
NOTE: This feature can be disabled using a tamper resistant dip switch,
providing a xed interval timer. Timing on this chart (above) is for
SSA100 Unit.
32 A DIVISION OF NSi INDUSTRIES, LLC
TIMERS
SSA SERIES SSA100
DIGITAL ELITE TIMERS SSA200
8 TIMERS IN ONE!
SSA200R-24
APPLICATIONS: SSA100 AND SSA200
For energy savings to control lighting or motor loads where an occupancy sensor is not suitable.
Fluorescent and incandescent lighting in areas such as ofces, meeting rooms, library aisles,
stock rooms, equipment rooms.
Timed override of lighting and HVAC for after hours cleaning crews.
Exhaust fans in work areas, utility rooms, bathrooms.
Hot tub heaters and circulating pumps.
Timed override of loads controlled by electromechanical or digital time switches.
APPLICATIONS: SSA200R-24
Interfaces with low voltage HVAC and lighting control systems.
Switches 20 Amp uorescent and incandescent lighting when operated with TORK
TRP transformer relay powerpacks.
Provides switching for loads controlled by BAS/EMS building management systems.
Provides timed override of lighting and HVAC for after hours use.
and
MEETS Can be overridden ON or OFF from remote locations using simple momentary switches.
CALIFORNIA
ENERGY COMMISSIONS ASHRAE
TITLE 24 REQUIREMENTS 90.1 1999
MEETS ADA GUIDELINES CAN INTERFACE WITH LOW VOLTAGE SYSTEMS
FOR CONTROLS &
MECHANISMS 4.27.4 REMOTE OVERRIDE VIA SIMPLE PUSHBUTTONS
FEATURES: ALL SSA MODELS before time out (either or both can be disabled).
Liquid Crystal Display stands out strongly in lighted areas See specications below for details.
and is electroluminescent backlit for dark areas. No minimum load required.
Tamper resistant time-on interval can be preset. In addition, a White decorator type face with matching wallplate
manual scroll-up mode (in 10 minute intervals) can override included.
the dip switch setting temporarily this feature can be dis-
abled, providing a xed interval timer. SSA100, SSA200 ALSO FEATURE:
In addition to numerical read-out LCD displays 10 bars at Zero Power switching prolongs life of relay contacts by
start of time on period. As interval counts down, one bar switching high inrush equipment at or close to zero power.
at a time turns off in 10% decrements. Compatible with electronic ballasts, incandescent lighting,
Flicker of lights and/or beep warning begins 2 minutes or motor loads.
EASY INSTALLATION One simple pushbutton on the face can then do the following:
Easy installation; ts standard 212 wallbox.
Easily replaces wall switch in existing installation.
For use in single or multi-gang applications. 1 Push momentarily and the load comes on for the preset
interval.
White decorator wallplate included.
DIP SWITCH # 1 2 3
5 MIN
DIP SWITCH # 4 5 6
FLICKER ON
At the time of installation, 2 Push momentarily while the load is on and it will turn
off.
15 MIN DIP SWITCH # FLICKER OFF a preset time-on interval
30 MIN 1 2 3 4 5 6 BEEPER ON
and other features are
3 Hold thethe timer resets for 1 or 2original preset interval. is
pushbutton in seconds while the load
1 HR BEEPER OFF
3 HR SCROLL ON selected using a set of dip
6 HR 1 2 3 4 5 6
SCROLL OFF switches. on and up to its
9 HR
12 HR
4 Hold the pushbutton in 10 minutes to its maximum setting.
begins to scroll up from
for over 3 seconds and the timer
NOTE: This feature can be disabled using a tamper resistant dip switch,
providing a xed interval timer. Timing on this chart (above) is for
SSA100 Unit.
32 A DIVISION OF NSi INDUSTRIES, LLC
TIMERS
SSA SERIES SSA100
DIGITAL ELITE TIMERS SSA200
8 TIMERS IN ONE!
SSA200R-24
APPLICATIONS: SSA100 AND SSA200
For energy savings to control lighting or motor loads where an occupancy sensor is not suitable.
Fluorescent and incandescent lighting in areas such as ofces, meeting rooms, library aisles,
stock rooms, equipment rooms.
Timed override of lighting and HVAC for after hours cleaning crews.
Exhaust fans in work areas, utility rooms, bathrooms.
Hot tub heaters and circulating pumps.
Timed override of loads controlled by electromechanical or digital time switches.
APPLICATIONS: SSA200R-24
Interfaces with low voltage HVAC and lighting control systems.
Switches 20 Amp uorescent and incandescent lighting when operated with TORK
TRP transformer relay powerpacks.
Provides switching for loads controlled by BAS/EMS building management systems.
Provides timed override of lighting and HVAC for after hours use.
and
MEETS Can be overridden ON or OFF from remote locations using simple momentary switches.
CALIFORNIA
ENERGY COMMISSIONS ASHRAE
TITLE 24 REQUIREMENTS 90.1 1999
MEETS ADA GUIDELINES CAN INTERFACE WITH LOW VOLTAGE SYSTEMS
FOR CONTROLS &
MECHANISMS 4.27.4 REMOTE OVERRIDE VIA SIMPLE PUSHBUTTONS
FEATURES: ALL SSA MODELS before time out (either or both can be disabled).
Liquid Crystal Display stands out strongly in lighted areas See specications below for details.
and is electroluminescent backlit for dark areas. No minimum load required.
Tamper resistant time-on interval can be preset. In addition, a White decorator type face with matching wallplate
manual scroll-up mode (in 10 minute intervals) can override included.
the dip switch setting temporarily this feature can be dis-
abled, providing a xed interval timer. SSA100, SSA200 ALSO FEATURE:
In addition to numerical read-out LCD displays 10 bars at Zero Power switching prolongs life of relay contacts by
start of time on period. As interval counts down, one bar switching high inrush equipment at or close to zero power.
at a time turns off in 10% decrements. Compatible with electronic ballasts, incandescent lighting,
Flicker of lights and/or beep warning begins 2 minutes or motor loads.
EASY INSTALLATION One simple pushbutton on the face can then do the following:
Easy installation; ts standard 212 wallbox.
Easily replaces wall switch in existing installation.
For use in single or multi-gang applications. 1 Push momentarily and the load comes on for the preset
interval.
White decorator wallplate included.
DIP SWITCH # 1 2 3
5 MIN
DIP SWITCH # 4 5 6
FLICKER ON
At the time of installation, 2 Push momentarily while the load is on and it will turn
off.
15 MIN DIP SWITCH # FLICKER OFF a preset time-on interval
30 MIN 1 2 3 4 5 6 BEEPER ON
and other features are
3 Hold thethe timer resets for 1 or 2original preset interval. is
pushbutton in seconds while the load
1 HR BEEPER OFF
3 HR SCROLL ON selected using a set of dip
6 HR 1 2 3 4 5 6
SCROLL OFF switches. on and up to its
9 HR
12 HR
4 Hold the pushbutton in 10 minutes to its maximum setting.
begins to scroll up from
for over 3 seconds and the timer
NOTE: This feature can be disabled using a tamper resistant dip switch,
providing a xed interval timer. Timing on this chart (above) is for
SSA100 Unit.
32 A DIVISION OF NSi INDUSTRIES, LLC
CATALOG UPC
NO CODE SETTABLE INTERVALS
SSA100 14010 MINUTES: 5, 15, 30 HOURS: 1, 3, 6, 9, 12
SSA200 14011 MINUTES: 10, 20, 40, 60, 90 HOURS: 2, 4, 6, 8
SSA200R-24 14014 MINUTES: 10, 20, 40, 60, 90 HOURS: 2, 4, 6, 8
SPECIFICATIONS & WIRING DIAGRAM:
SSA100, SSA200 SSA100/200
Note: unit is not suitable for lamps which require long striking periods
i.e. HID type.
BLACK HOT
INPUT: Multi-voltage 120/277 VAC, 50/60Hz GREEN 120V GROUND
CONTACT RATINGS: GREEN /YELLOW 277V GROUND
type 120VAC 277VAC
tungsten 800W RED LOAD NEUTRAL
ballast 800W 1200W
motor 1/6HP SSA100/200
pilot duty 240VA
TIMING ACCURACY: .002% BLACK HOT
OPERATING TEMPERATURE: 0 - 100 F OPERATING HUMIDITY: 90% RH Non-condensing GREEN 120V GROUND
GREEN /YELLOW 277V GROUND
COLOR of faceplate and wallplate: white RED (+) 24VAC
WARNING BEFORE TIME OUT: Flicker feature turns load off for 1 second, 2 minutes before end of timed RED or
NEUTRAL
LOAD ()
cycle and again 1 minute before end of timed cycle. BLACK VDC
BEEP FEATURE will sound a 12 second beep every 12 seconds during the last 2 minutes of timed cycle.
ORANGE NC
BLUE C
REMOTE GREY
OVERRIDE NO
YELLOW
RED (+) 24VAC
SPECIFICATIONS & WIRING DIAGRAM: YELLOW or
BLACK () VDC
SSA200R-24
INPUT VOLTAGE: 24VAC / VDC (No Minimum Load) SSA200R-24 ORANGE NC
CURRENT DRAW: 16ma max. @ 24VDC BLUE C
USING TRP TRANSFORMER RELAY POWERPACK 20 AMP
22ma max. @ 24VAC REMOTE GREY
LOAD
CONTACTS: Single Pole, Double Throw OVERRIDE NO L
RED
Isolated Contacts YELLOW
RED
RED
CONTACT RATING: 1 A 30V Maximum YELLOW
BLACK
100A @ 1V Minimum RED
ORANGE NC
TORK
TIMING ACCURACY: .002%
TRP
BLUE BLACK
OPERATING TEMPERATURE: 0- 100 F SSA200R-24 C
REMOTE GREY
OPERATING HUMIDITY: 90% RH Non-condensing USINGOVERRIDE
TRP TRANSFORMER NO
RELAY POWERPACK BLUE 20 AMP
COLOR of faceplate and wallplate: white YELLOW LOAD
WHITE
BLACK
RED L
WARNING BEFORE TIME OUT: Flicker feature turns load YELLOW
RED
RED
LOW
off for 1 second, 2 minutes before end of timed cycle BLACK
VOLTAGE N L
and again 1 minute before end of timed cycle. RED
BEEP FEATURE will sound a 12 second beep every 12 ORANGE NC TORK
TRP
BLUE BLACK
seconds during the last 2 minutes of timed cycle. C
REMOTE GREY
OVERRIDE NO BLUE
YELLOW
WHITE
BLACK
YELLOW LOW
VOLTAGE N L
SPECIFICATION WRITERS GUIDE SSA100, SSA200
Furnish and install a solid state interval time switch with backlit LCD display. Intervals can be preset using a series of dip switches. A tamper resistant manual scroll-up mode must
be provided to override the dip switch setting temporarily. Unit shall be capable of a user selectable audible and/or visual warning beginning 2 minutes prior to time out. Unit
design to provide zero power switching for the contacts. Unit to accept 120/277VAC, 50/60 Hz. A white decorator wallplate to be included.
SPECIFICATION WRITERS GUIDE SSA200R-24
Furnish and install a solid state interval time switch with backlit LCD display. Intervals can be preset using a series of dip switches. A tamper resistant manual scroll-up mode must
be provided to override the dip switch setting temporarily. Unit shall be capable of a user selectable audible and/or visual warning beginning 2 minutes prior to time out. Unit to
accept 24VAC/ DC. A white decorator wallplate to be included.
JUNE 2007 A DIVISION OF NSi INDUSTRIES, LLC
33
CATALOG UPC
NO CODE SETTABLE INTERVALS
SSA100 14010 MINUTES: 5, 15, 30 HOURS: 1, 3, 6, 9, 12
SSA200 14011 MINUTES: 10, 20, 40, 60, 90 HOURS: 2, 4, 6, 8
SSA200R-24 14014 MINUTES: 10, 20, 40, 60, 90 HOURS: 2, 4, 6, 8
SPECIFICATIONS & WIRING DIAGRAM:
SSA100, SSA200 SSA100/200
Note: unit is not suitable for lamps which require long striking periods
i.e. HID type.
BLACK HOT
INPUT: Multi-voltage 120/277 VAC, 50/60Hz GREEN 120V GROUND
CONTACT RATINGS: GREEN /YELLOW 277V GROUND
type 120VAC 277VAC
tungsten 800W RED LOAD NEUTRAL
ballast 800W 1200W
motor 1/6HP SSA100/200
pilot duty 240VA
TIMING ACCURACY: .002% BLACK HOT
OPERATING TEMPERATURE: 0 - 100 F OPERATING HUMIDITY: 90% RH Non-condensing GREEN 120V GROUND
GREEN /YELLOW 277V GROUND
COLOR of faceplate and wallplate: white RED (+) 24VAC
WARNING BEFORE TIME OUT: Flicker feature turns load off for 1 second, 2 minutes before end of timed RED or
NEUTRAL
LOAD ()
cycle and again 1 minute before end of timed cycle. BLACK VDC
BEEP FEATURE will sound a 12 second beep every 12 seconds during the last 2 minutes of timed cycle.
ORANGE NC
BLUE C
REMOTE GREY
OVERRIDE NO
YELLOW
RED (+) 24VAC
SPECIFICATIONS & WIRING DIAGRAM: YELLOW or
BLACK () VDC
SSA200R-24
INPUT VOLTAGE: 24VAC / VDC (No Minimum Load) SSA200R-24 ORANGE NC
CURRENT DRAW: 16ma max. @ 24VDC BLUE C
USING TRP TRANSFORMER RELAY POWERPACK 20 AMP
22ma max. @ 24VAC REMOTE GREY
LOAD
CONTACTS: Single Pole, Double Throw OVERRIDE NO L
RED
Isolated Contacts YELLOW
RED
RED
CONTACT RATING: 1 A 30V Maximum YELLOW
BLACK
100A @ 1V Minimum RED
ORANGE NC
TORK
TIMING ACCURACY: .002%
TRP
BLUE BLACK
OPERATING TEMPERATURE: 0- 100 F SSA200R-24 C
REMOTE GREY
OPERATING HUMIDITY: 90% RH Non-condensing USINGOVERRIDE
TRP TRANSFORMER NO
RELAY POWERPACK BLUE 20 AMP
COLOR of faceplate and wallplate: white YELLOW LOAD
WHITE
BLACK
RED L
WARNING BEFORE TIME OUT: Flicker feature turns load YELLOW
RED
RED
LOW
off for 1 second, 2 minutes before end of timed cycle BLACK
VOLTAGE N L
and again 1 minute before end of timed cycle. RED
BEEP FEATURE will sound a 12 second beep every 12 ORANGE NC TORK
TRP
BLUE BLACK
seconds during the last 2 minutes of timed cycle. C
REMOTE GREY
OVERRIDE NO BLUE
YELLOW
WHITE
BLACK
YELLOW LOW
VOLTAGE N L
SPECIFICATION WRITERS GUIDE SSA100, SSA200
Furnish and install a solid state interval time switch with backlit LCD display. Intervals can be preset using a series of dip switches. A tamper resistant manual scroll-up mode must
be provided to override the dip switch setting temporarily. Unit shall be capable of a user selectable audible and/or visual warning beginning 2 minutes prior to time out. Unit
design to provide zero power switching for the contacts. Unit to accept 120/277VAC, 50/60 Hz. A white decorator wallplate to be included.
SPECIFICATION WRITERS GUIDE SSA200R-24
Furnish and install a solid state interval time switch with backlit LCD display. Intervals can be preset using a series of dip switches. A tamper resistant manual scroll-up mode must
be provided to override the dip switch setting temporarily. Unit shall be capable of a user selectable audible and/or visual warning beginning 2 minutes prior to time out. Unit to
accept 24VAC/ DC. A white decorator wallplate to be included.
JUNE 2007 A DIVISION OF NSi INDUSTRIES, LLC
33
CATALOG UPC
NO CODE SETTABLE INTERVALS
SSA100 14010 MINUTES: 5, 15, 30 HOURS: 1, 3, 6, 9, 12
SSA200 14011 MINUTES: 10, 20, 40, 60, 90 HOURS: 2, 4, 6, 8
SSA200R-24 14014 MINUTES: 10, 20, 40, 60, 90 HOURS: 2, 4, 6, 8
SPECIFICATIONS & WIRING DIAGRAM:
SSA100, SSA200 SSA100/200
Note: unit is not suitable for lamps which require long striking periods
i.e. HID type.
BLACK HOT
INPUT: Multi-voltage 120/277 VAC, 50/60Hz GREEN 120V GROUND
CONTACT RATINGS: GREEN /YELLOW 277V GROUND
type 120VAC 277VAC
tungsten 800W RED LOAD NEUTRAL
ballast 800W 1200W
motor 1/6HP SSA100/200
pilot duty 240VA
TIMING ACCURACY: .002% BLACK HOT
OPERATING TEMPERATURE: 0 - 100 F OPERATING HUMIDITY: 90% RH Non-condensing GREEN 120V GROUND
GREEN /YELLOW 277V GROUND
COLOR of faceplate and wallplate: white RED (+) 24VAC
WARNING BEFORE TIME OUT: Flicker feature turns load off for 1 second, 2 minutes before end of timed RED or
NEUTRAL
LOAD ()
cycle and again 1 minute before end of timed cycle. BLACK VDC
BEEP FEATURE will sound a 12 second beep every 12 seconds during the last 2 minutes of timed cycle.
ORANGE NC
BLUE C
REMOTE GREY
OVERRIDE NO
YELLOW
RED (+) 24VAC
SPECIFICATIONS & WIRING DIAGRAM: YELLOW or
BLACK () VDC
SSA200R-24
INPUT VOLTAGE: 24VAC / VDC (No Minimum Load) SSA200R-24 ORANGE NC
CURRENT DRAW: 16ma max. @ 24VDC BLUE C
USING TRP TRANSFORMER RELAY POWERPACK 20 AMP
22ma max. @ 24VAC REMOTE GREY
LOAD
CONTACTS: Single Pole, Double Throw OVERRIDE NO L
RED
Isolated Contacts YELLOW
RED
RED
CONTACT RATING: 1 A 30V Maximum YELLOW
BLACK
100A @ 1V Minimum RED
ORANGE NC
TORK
TIMING ACCURACY: .002%
TRP
BLUE BLACK
OPERATING TEMPERATURE: 0- 100 F SSA200R-24 C
REMOTE GREY
OPERATING HUMIDITY: 90% RH Non-condensing USINGOVERRIDE
TRP TRANSFORMER NO
RELAY POWERPACK BLUE 20 AMP
COLOR of faceplate and wallplate: white YELLOW LOAD
WHITE
BLACK
RED L
WARNING BEFORE TIME OUT: Flicker feature turns load YELLOW
RED
RED
LOW
off for 1 second, 2 minutes before end of timed cycle BLACK
VOLTAGE N L
and again 1 minute before end of timed cycle. RED
BEEP FEATURE will sound a 12 second beep every 12 ORANGE NC TORK
TRP
BLUE BLACK
seconds during the last 2 minutes of timed cycle. C
REMOTE GREY
OVERRIDE NO BLUE
YELLOW
WHITE
BLACK
YELLOW LOW
VOLTAGE N L
SPECIFICATION WRITERS GUIDE SSA100, SSA200
Furnish and install a solid state interval time switch with backlit LCD display. Intervals can be preset using a series of dip switches. A tamper resistant manual scroll-up mode must
be provided to override the dip switch setting temporarily. Unit shall be capable of a user selectable audible and/or visual warning beginning 2 minutes prior to time out. Unit
design to provide zero power switching for the contacts. Unit to accept 120/277VAC, 50/60 Hz. A white decorator wallplate to be included.
SPECIFICATION WRITERS GUIDE SSA200R-24
Furnish and install a solid state interval time switch with backlit LCD display. Intervals can be preset using a series of dip switches. A tamper resistant manual scroll-up mode must
be provided to override the dip switch setting temporarily. Unit shall be capable of a user selectable audible and/or visual warning beginning 2 minutes prior to time out. Unit to
accept 24VAC/ DC. A white decorator wallplate to be included.
JUNE 2007 A DIVISION OF NSi INDUSTRIES, LLC
33
CATALOG UPC
NO CODE SETTABLE INTERVALS
SSA100 14010 MINUTES: 5, 15, 30 HOURS: 1, 3, 6, 9, 12
SSA200 14011 MINUTES: 10, 20, 40, 60, 90 HOURS: 2, 4, 6, 8
SSA200R-24 14014 MINUTES: 10, 20, 40, 60, 90 HOURS: 2, 4, 6, 8
SPECIFICATIONS & WIRING DIAGRAM:
SSA100, SSA200 SSA100/200
Note: unit is not suitable for lamps which require long striking periods
i.e. HID type.
BLACK HOT
INPUT: Multi-voltage 120/277 VAC, 50/60Hz GREEN 120V GROUND
CONTACT RATINGS: GREEN /YELLOW 277V GROUND
type 120VAC 277VAC
tungsten 800W RED LOAD NEUTRAL
ballast 800W 1200W
motor 1/6HP SSA100/200
pilot duty 240VA
TIMING ACCURACY: .002% BLACK HOT
OPERATING TEMPERATURE: 0 - 100 F OPERATING HUMIDITY: 90% RH Non-condensing GREEN 120V GROUND
GREEN /YELLOW 277V GROUND
COLOR of faceplate and wallplate: white RED (+) 24VAC
WARNING BEFORE TIME OUT: Flicker feature turns load off for 1 second, 2 minutes before end of timed RED or
NEUTRAL
LOAD ()
cycle and again 1 minute before end of timed cycle. BLACK VDC
BEEP FEATURE will sound a 12 second beep every 12 seconds during the last 2 minutes of timed cycle.
ORANGE NC
BLUE C
REMOTE GREY
OVERRIDE NO
YELLOW
RED (+) 24VAC
SPECIFICATIONS & WIRING DIAGRAM: YELLOW or
BLACK () VDC
SSA200R-24
INPUT VOLTAGE: 24VAC / VDC (No Minimum Load) SSA200R-24 ORANGE NC
CURRENT DRAW: 16ma max. @ 24VDC BLUE C
USING TRP TRANSFORMER RELAY POWERPACK 20 AMP
22ma max. @ 24VAC REMOTE GREY
LOAD
CONTACTS: Single Pole, Double Throw OVERRIDE NO L
RED
Isolated Contacts YELLOW
RED
RED
CONTACT RATING: 1 A 30V Maximum YELLOW
BLACK
100A @ 1V Minimum RED
ORANGE NC
TORK
TIMING ACCURACY: .002%
TRP
BLUE BLACK
OPERATING TEMPERATURE: 0- 100 F SSA200R-24 C
REMOTE GREY
OPERATING HUMIDITY: 90% RH Non-condensing USINGOVERRIDE
TRP TRANSFORMER NO
RELAY POWERPACK BLUE 20 AMP
COLOR of faceplate and wallplate: white YELLOW LOAD
WHITE
BLACK
RED L
WARNING BEFORE TIME OUT: Flicker feature turns load YELLOW
RED
RED
LOW
off for 1 second, 2 minutes before end of timed cycle BLACK
VOLTAGE N L
and again 1 minute before end of timed cycle. RED
BEEP FEATURE will sound a 12 second beep every 12 ORANGE NC TORK
TRP
BLUE BLACK
seconds during the last 2 minutes of timed cycle. C
REMOTE GREY
OVERRIDE NO BLUE
YELLOW
WHITE
BLACK
YELLOW LOW
VOLTAGE N L
SPECIFICATION WRITERS GUIDE SSA100, SSA200
Furnish and install a solid state interval time switch with backlit LCD display. Intervals can be preset using a series of dip switches. A tamper resistant manual scroll-up mode must
be provided to override the dip switch setting temporarily. Unit shall be capable of a user selectable audible and/or visual warning beginning 2 minutes prior to time out. Unit
design to provide zero power switching for the contacts. Unit to accept 120/277VAC, 50/60 Hz. A white decorator wallplate to be included.
SPECIFICATION WRITERS GUIDE SSA200R-24
Furnish and install a solid state interval time switch with backlit LCD display. Intervals can be preset using a series of dip switches. A tamper resistant manual scroll-up mode must
be provided to override the dip switch setting temporarily. Unit shall be capable of a user selectable audible and/or visual warning beginning 2 minutes prior to time out. Unit to
accept 24VAC/ DC. A white decorator wallplate to be included.
JUNE 2007 A DIVISION OF NSi INDUSTRIES, LLC
33
CATALOG UPC
NO CODE SETTABLE INTERVALS
SSA100 14010 MINUTES: 5, 15, 30 HOURS: 1, 3, 6, 9, 12
SSA200 14011 MINUTES: 10, 20, 40, 60, 90 HOURS: 2, 4, 6, 8
SSA200R-24 14014 MINUTES: 10, 20, 40, 60, 90 HOURS: 2, 4, 6, 8
SPECIFICATIONS & WIRING DIAGRAM:
SSA100, SSA200 SSA100/200
Note: unit is not suitable for lamps which require long striking periods
i.e. HID type.
BLACK HOT
INPUT: Multi-voltage 120/277 VAC, 50/60Hz GREEN 120V GROUND
CONTACT RATINGS: GREEN /YELLOW 277V GROUND
type 120VAC 277VAC
tungsten 800W RED LOAD NEUTRAL
ballast 800W 1200W
motor 1/6HP SSA100/200
pilot duty 240VA
TIMING ACCURACY: .002% BLACK HOT
OPERATING TEMPERATURE: 0 - 100 F OPERATING HUMIDITY: 90% RH Non-condensing GREEN 120V GROUND
GREEN /YELLOW 277V GROUND
COLOR of faceplate and wallplate: white RED (+) 24VAC
WARNING BEFORE TIME OUT: Flicker feature turns load off for 1 second, 2 minutes before end of timed RED or
NEUTRAL
LOAD ()
cycle and again 1 minute before end of timed cycle. BLACK VDC
BEEP FEATURE will sound a 12 second beep every 12 seconds during the last 2 minutes of timed cycle.
ORANGE NC
BLUE C
REMOTE GREY
OVERRIDE NO
YELLOW
RED (+) 24VAC
SPECIFICATIONS & WIRING DIAGRAM: YELLOW or
BLACK () VDC
SSA200R-24
INPUT VOLTAGE: 24VAC / VDC (No Minimum Load) SSA200R-24 ORANGE NC
CURRENT DRAW: 16ma max. @ 24VDC BLUE C
USING TRP TRANSFORMER RELAY POWERPACK 20 AMP
22ma max. @ 24VAC REMOTE GREY
LOAD
CONTACTS: Single Pole, Double Throw OVERRIDE NO L
RED
Isolated Contacts YELLOW
RED
RED
CONTACT RATING: 1 A 30V Maximum YELLOW
BLACK
100A @ 1V Minimum RED
ORANGE NC
TORK
TIMING ACCURACY: .002%
TRP
BLUE BLACK
OPERATING TEMPERATURE: 0- 100 F SSA200R-24 C
REMOTE GREY
OPERATING HUMIDITY: 90% RH Non-condensing USINGOVERRIDE
TRP TRANSFORMER NO
RELAY POWERPACK BLUE 20 AMP
COLOR of faceplate and wallplate: white YELLOW LOAD
WHITE
BLACK
RED L
WARNING BEFORE TIME OUT: Flicker feature turns load YELLOW
RED
RED
LOW
off for 1 second, 2 minutes before end of timed cycle BLACK
VOLTAGE N L
and again 1 minute before end of timed cycle. RED
BEEP FEATURE will sound a 12 second beep every 12 ORANGE NC TORK
TRP
BLUE BLACK
seconds during the last 2 minutes of timed cycle. C
REMOTE GREY
OVERRIDE NO BLUE
YELLOW
WHITE
BLACK
YELLOW LOW
VOLTAGE N L
SPECIFICATION WRITERS GUIDE SSA100, SSA200
Furnish and install a solid state interval time switch with backlit LCD display. Intervals can be preset using a series of dip switches. A tamper resistant manual scroll-up mode must
be provided to override the dip switch setting temporarily. Unit shall be capable of a user selectable audible and/or visual warning beginning 2 minutes prior to time out. Unit
design to provide zero power switching for the contacts. Unit to accept 120/277VAC, 50/60 Hz. A white decorator wallplate to be included.
SPECIFICATION WRITERS GUIDE SSA200R-24
Furnish and install a solid state interval time switch with backlit LCD display. Intervals can be preset using a series of dip switches. A tamper resistant manual scroll-up mode must
be provided to override the dip switch setting temporarily. Unit shall be capable of a user selectable audible and/or visual warning beginning 2 minutes prior to time out. Unit to
accept 24VAC/ DC. A white decorator wallplate to be included.
JUNE 2007 A DIVISION OF NSi INDUSTRIES, LLC
33
CATALOG UPC
NO CODE SETTABLE INTERVALS
SSA100 14010 MINUTES: 5, 15, 30 HOURS: 1, 3, 6, 9, 12
SSA200 14011 MINUTES: 10, 20, 40, 60, 90 HOURS: 2, 4, 6, 8
SSA200R-24 14014 MINUTES: 10, 20, 40, 60, 90 HOURS: 2, 4, 6, 8
SPECIFICATIONS & WIRING DIAGRAM:
SSA100, SSA200 SSA100/200
Note: unit is not suitable for lamps which require long striking periods
i.e. HID type.
BLACK HOT
INPUT: Multi-voltage 120/277 VAC, 50/60Hz GREEN 120V GROUND
CONTACT RATINGS: GREEN /YELLOW 277V GROUND
type 120VAC 277VAC
tungsten 800W RED LOAD NEUTRAL
ballast 800W 1200W
motor 1/6HP SSA100/200
pilot duty 240VA
TIMING ACCURACY: .002% BLACK HOT
OPERATING TEMPERATURE: 0 - 100 F OPERATING HUMIDITY: 90% RH Non-condensing GREEN 120V GROUND
GREEN /YELLOW 277V GROUND
COLOR of faceplate and wallplate: white RED (+) 24VAC
WARNING BEFORE TIME OUT: Flicker feature turns load off for 1 second, 2 minutes before end of timed RED or
NEUTRAL
LOAD ()
cycle and again 1 minute before end of timed cycle. BLACK VDC
BEEP FEATURE will sound a 12 second beep every 12 seconds during the last 2 minutes of timed cycle.
ORANGE NC
BLUE C
REMOTE GREY
OVERRIDE NO
YELLOW
RED (+) 24VAC
SPECIFICATIONS & WIRING DIAGRAM: YELLOW or
BLACK () VDC
SSA200R-24
INPUT VOLTAGE: 24VAC / VDC (No Minimum Load) SSA200R-24 ORANGE NC
CURRENT DRAW: 16ma max. @ 24VDC BLUE C
USING TRP TRANSFORMER RELAY POWERPACK 20 AMP
22ma max. @ 24VAC REMOTE GREY
LOAD
CONTACTS: Single Pole, Double Throw OVERRIDE NO L
RED
Isolated Contacts YELLOW
RED
RED
CONTACT RATING: 1 A 30V Maximum YELLOW
BLACK
100A @ 1V Minimum RED
ORANGE NC
TORK
TIMING ACCURACY: .002%
TRP
BLUE BLACK
OPERATING TEMPERATURE: 0- 100 F SSA200R-24 C
REMOTE GREY
OPERATING HUMIDITY: 90% RH Non-condensing USINGOVERRIDE
TRP TRANSFORMER NO
RELAY POWERPACK BLUE 20 AMP
COLOR of faceplate and wallplate: white YELLOW LOAD
WHITE
BLACK
RED L
WARNING BEFORE TIME OUT: Flicker feature turns load YELLOW
RED
RED
LOW
off for 1 second, 2 minutes before end of timed cycle BLACK
VOLTAGE N L
and again 1 minute before end of timed cycle. RED
BEEP FEATURE will sound a 12 second beep every 12 ORANGE NC TORK
TRP
BLUE BLACK
seconds during the last 2 minutes of timed cycle. C
REMOTE GREY
OVERRIDE NO BLUE
YELLOW
WHITE
BLACK
YELLOW LOW
VOLTAGE N L
SPECIFICATION WRITERS GUIDE SSA100, SSA200
Furnish and install a solid state interval time switch with backlit LCD display. Intervals can be preset using a series of dip switches. A tamper resistant manual scroll-up mode must
be provided to override the dip switch setting temporarily. Unit shall be capable of a user selectable audible and/or visual warning beginning 2 minutes prior to time out. Unit
design to provide zero power switching for the contacts. Unit to accept 120/277VAC, 50/60 Hz. A white decorator wallplate to be included.
SPECIFICATION WRITERS GUIDE SSA200R-24
Furnish and install a solid state interval time switch with backlit LCD display. Intervals can be preset using a series of dip switches. A tamper resistant manual scroll-up mode must
be provided to override the dip switch setting temporarily. Unit shall be capable of a user selectable audible and/or visual warning beginning 2 minutes prior to time out. Unit to
accept 24VAC/ DC. A white decorator wallplate to be included.
JUNE 2007 A DIVISION OF NSi INDUSTRIES, LLC
33
CATALOG UPC
NO CODE SETTABLE INTERVALS
SSA100 14010 MINUTES: 5, 15, 30 HOURS: 1, 3, 6, 9, 12
SSA200 14011 MINUTES: 10, 20, 40, 60, 90 HOURS: 2, 4, 6, 8
SSA200R-24 14014 MINUTES: 10, 20, 40, 60, 90 HOURS: 2, 4, 6, 8
SPECIFICATIONS & WIRING DIAGRAM:
SSA100, SSA200 SSA100/200
Note: unit is not suitable for lamps which require long striking periods
i.e. HID type.
BLACK HOT
INPUT: Multi-voltage 120/277 VAC, 50/60Hz GREEN 120V GROUND
CONTACT RATINGS: GREEN /YELLOW 277V GROUND
type 120VAC 277VAC
tungsten 800W RED LOAD NEUTRAL
ballast 800W 1200W
motor 1/6HP SSA100/200
pilot duty 240VA
TIMING ACCURACY: .002% BLACK HOT
OPERATING TEMPERATURE: 0 - 100 F OPERATING HUMIDITY: 90% RH Non-condensing GREEN 120V GROUND
GREEN /YELLOW 277V GROUND
COLOR of faceplate and wallplate: white RED (+) 24VAC
WARNING BEFORE TIME OUT: Flicker feature turns load off for 1 second, 2 minutes before end of timed RED or
NEUTRAL
LOAD ()
cycle and again 1 minute before end of timed cycle. BLACK VDC
BEEP FEATURE will sound a 12 second beep every 12 seconds during the last 2 minutes of timed cycle.
ORANGE NC
BLUE C
REMOTE GREY
OVERRIDE NO
YELLOW
RED (+) 24VAC
SPECIFICATIONS & WIRING DIAGRAM: YELLOW or
BLACK () VDC
SSA200R-24
INPUT VOLTAGE: 24VAC / VDC (No Minimum Load) SSA200R-24 ORANGE NC
CURRENT DRAW: 16ma max. @ 24VDC BLUE C
USING TRP TRANSFORMER RELAY POWERPACK 20 AMP
22ma max. @ 24VAC REMOTE GREY
LOAD
CONTACTS: Single Pole, Double Throw OVERRIDE NO L
RED
Isolated Contacts YELLOW
RED
RED
CONTACT RATING: 1 A 30V Maximum YELLOW
BLACK
100A @ 1V Minimum RED
ORANGE NC
TORK
TIMING ACCURACY: .002%
TRP
BLUE BLACK
OPERATING TEMPERATURE: 0- 100 F SSA200R-24 C
REMOTE GREY
OPERATING HUMIDITY: 90% RH Non-condensing USINGOVERRIDE
TRP TRANSFORMER NO
RELAY POWERPACK BLUE 20 AMP
COLOR of faceplate and wallplate: white YELLOW LOAD
WHITE
BLACK
RED L
WARNING BEFORE TIME OUT: Flicker feature turns load YELLOW
RED
RED
LOW
off for 1 second, 2 minutes before end of timed cycle BLACK
VOLTAGE N L
and again 1 minute before end of timed cycle. RED
BEEP FEATURE will sound a 12 second beep every 12 ORANGE NC TORK
TRP
BLUE BLACK
seconds during the last 2 minutes of timed cycle. C
REMOTE GREY
OVERRIDE NO BLUE
YELLOW
WHITE
BLACK
YELLOW LOW
VOLTAGE N L
SPECIFICATION WRITERS GUIDE SSA100, SSA200
Furnish and install a solid state interval time switch with backlit LCD display. Intervals can be preset using a series of dip switches. A tamper resistant manual scroll-up mode must
be provided to override the dip switch setting temporarily. Unit shall be capable of a user selectable audible and/or visual warning beginning 2 minutes prior to time out. Unit
design to provide zero power switching for the contacts. Unit to accept 120/277VAC, 50/60 Hz. A white decorator wallplate to be included.
SPECIFICATION WRITERS GUIDE SSA200R-24
Furnish and install a solid state interval time switch with backlit LCD display. Intervals can be preset using a series of dip switches. A tamper resistant manual scroll-up mode must
be provided to override the dip switch setting temporarily. Unit shall be capable of a user selectable audible and/or visual warning beginning 2 minutes prior to time out. Unit to
accept 24VAC/ DC. A white decorator wallplate to be included.
JUNE 2007 A DIVISION OF NSi INDUSTRIES, LLC
33
CATALOG UPC
NO CODE SETTABLE INTERVALS
SSA100 14010 MINUTES: 5, 15, 30 HOURS: 1, 3, 6, 9, 12
SSA200 14011 MINUTES: 10, 20, 40, 60, 90 HOURS: 2, 4, 6, 8
SSA200R-24 14014 MINUTES: 10, 20, 40, 60, 90 HOURS: 2, 4, 6, 8
SPECIFICATIONS & WIRING DIAGRAM:
SSA100, SSA200 SSA100/200
Note: unit is not suitable for lamps which require long striking periods
i.e. HID type.
BLACK HOT
INPUT: Multi-voltage 120/277 VAC, 50/60Hz GREEN 120V GROUND
CONTACT RATINGS: GREEN /YELLOW 277V GROUND
type 120VAC 277VAC
tungsten 800W RED LOAD NEUTRAL
ballast 800W 1200W
motor 1/6HP SSA100/200
pilot duty 240VA
TIMING ACCURACY: .002% BLACK HOT
OPERATING TEMPERATURE: 0 - 100 F OPERATING HUMIDITY: 90% RH Non-condensing GREEN 120V GROUND
GREEN /YELLOW 277V GROUND
COLOR of faceplate and wallplate: white RED (+) 24VAC
WARNING BEFORE TIME OUT: Flicker feature turns load off for 1 second, 2 minutes before end of timed RED or
NEUTRAL
LOAD ()
cycle and again 1 minute before end of timed cycle. BLACK VDC
BEEP FEATURE will sound a 12 second beep every 12 seconds during the last 2 minutes of timed cycle.
ORANGE NC
BLUE C
REMOTE GREY
OVERRIDE NO
YELLOW
RED (+) 24VAC
SPECIFICATIONS & WIRING DIAGRAM: YELLOW or
BLACK () VDC
SSA200R-24
INPUT VOLTAGE: 24VAC / VDC (No Minimum Load) SSA200R-24 ORANGE NC
CURRENT DRAW: 16ma max. @ 24VDC BLUE C
USING TRP TRANSFORMER RELAY POWERPACK 20 AMP
22ma max. @ 24VAC REMOTE GREY
LOAD
CONTACTS: Single Pole, Double Throw OVERRIDE NO L
RED
Isolated Contacts YELLOW
RED
RED
CONTACT RATING: 1 A 30V Maximum YELLOW
BLACK
100A @ 1V Minimum RED
ORANGE NC
TORK
TIMING ACCURACY: .002%
TRP
BLUE BLACK
OPERATING TEMPERATURE: 0- 100 F SSA200R-24 C
REMOTE GREY
OPERATING HUMIDITY: 90% RH Non-condensing USINGOVERRIDE
TRP TRANSFORMER NO
RELAY POWERPACK BLUE 20 AMP
COLOR of faceplate and wallplate: white YELLOW LOAD
WHITE
BLACK
RED L
WARNING BEFORE TIME OUT: Flicker feature turns load YELLOW
RED
RED
LOW
off for 1 second, 2 minutes before end of timed cycle BLACK
VOLTAGE N L
and again 1 minute before end of timed cycle. RED
BEEP FEATURE will sound a 12 second beep every 12 ORANGE NC TORK
TRP
BLUE BLACK
seconds during the last 2 minutes of timed cycle. C
REMOTE GREY
OVERRIDE NO BLUE
YELLOW
WHITE
BLACK
YELLOW LOW
VOLTAGE N L
SPECIFICATION WRITERS GUIDE SSA100, SSA200
Furnish and install a solid state interval time switch with backlit LCD display. Intervals can be preset using a series of dip switches. A tamper resistant manual scroll-up mode must
be provided to override the dip switch setting temporarily. Unit shall be capable of a user selectable audible and/or visual warning beginning 2 minutes prior to time out. Unit
design to provide zero power switching for the contacts. Unit to accept 120/277VAC, 50/60 Hz. A white decorator wallplate to be included.
SPECIFICATION WRITERS GUIDE SSA200R-24
Furnish and install a solid state interval time switch with backlit LCD display. Intervals can be preset using a series of dip switches. A tamper resistant manual scroll-up mode must
be provided to override the dip switch setting temporarily. Unit shall be capable of a user selectable audible and/or visual warning beginning 2 minutes prior to time out. Unit to
accept 24VAC/ DC. A white decorator wallplate to be included.
JUNE 2007 A DIVISION OF NSi INDUSTRIES, LLC
33
