3516040
Keywords: NEAPCO NEA 3516040 NEAPCO INC 3516040
Category: [0] => SUPPLIER DIRECTORY => NEAPCO INC
TUBE WELD YOKES
Inside Snap Ring
J
A L F
B
Note: Some non-Neapco driveline tubing sizes will require that dimension F (butt diameter) be reduced for proper
tubing interference. Machine the butt diameter .008 to .012 greater than the inside diameter of the tube.
F J
Butt Type of
For use with Diameter Butt Centerline Used in
Tubing Diameter HoHollow to Point Joint Yoke and Tube Tube Yoke
and Wall SoSolid of Weld Angle Assembly Part Number
N1000 Series use Kit No. 1-0170 A-2.312 B-.938 L-1.500 (Replaces Spicer No. 5-170X)
1.750X.065 1.625 So 2.000 60O 10-2817
11-4714
2.000X.083 1.844 So 1.750 11-5914 10-1005
7260 Series use Kit No. 1-6301 A-3.000 B-1.078 L-2.125 (Replaces Spicer No. 5-1306X)
2.500X.065 2.391 Ho 1.688 72622-1 2405863
Neapco recommends conversion to N1310 Series Use N2-28-277
2.750X.065 2.625 Ho 1.688 2781985
Neapco recommends conversion to N1310 Series Use N2-28-307
3.000X.065 2.875 Ho 1.625 2852196
Neapco recommends conversion to N1310 Series Use N2-28-327
3.000X.083 2.844 Ho 1.625 3516040
Neapco recommends conversion to N1310 Series Use N2-28-437
3.250X.065 3.125 Ho 1.625 3516214 2883629
Neapco recommends conversion to N1310 Series Use N2-28-557
4.000X.065 3.875 Ho 1.953 3516215 3516021
Neapco recommends conversion to N1310 Series Use N2-28-021
1310/7260 Conversion joint use Kit No. 2-3100
2004 Neapco Inc. 06/04 V-3
