Commercial Building Controls : Valves and Valve Actuators : Globe Valves : V5011N : V5011N1008/U
1/2 in 2-way f-NPT Globe valve 2-way 0.73 Cv, Water or Glycol or Steam
Overview
Used for two-position or modulating control of steam and water and glycol solutions (to 50 percent concentration) in heating or cooling systems.
Features
- Sizes range from 1/2 to 2 inches.
- Direct and reverse acting
- High pressure steam models with stainless steel trim
- Spring-loaded, self-adjusting packing.
- Stainless steel stem prevents corrosion.
- Valve designs provide equal percentage characteristics of flow for close control of water, and linear characteristic of flow for close control of steam or chilled water.
- Valves utilize direct mounting, electric or pneumatic linear valve actuators; Q5001 linkage with Modutrol Motor; or Q5020/Q5022A linkages with direct coupled rotary actuators to operate the valve.
- Not suitable for combustible gases.
Product Specifications
- Dimensions (in.)
- 6 5/8 in. high x 3 1/4 in. wide x 1 9/16 in. deep
- Dimensions (mm)
- 168 mm high x 82 mm wide x 39 mm deep
- Maximum Safe Operating Pressure (psi)
- 217 psi at 248 F
- Maximum Safe Operating Pressure (kPa)
- 1500 kPa at 120 C
- Used With
- ML6984/ML7984; Q5020/DCA; Q5001/Modutrol IV Motor; MP953; ML6420,21A,25; ML7420/ML7421A/ML7425
- Ambient Temperature Range (F)
- 36 F to 248 F water
- Ambient Temperature Range (C)
- 2 C to 120 C water
- Connection Type
- Female NPT
- Body Pattern
- Two-way
- Pipe Size (inch)
- 1/2 in.
- Pipe Size (DN)
- DN15
- Bonnet Size (in.)
- 1-3/8 in.
- Maximum Differential Pressure Ratings (Close-off) (psi)
- 240 psi; For Quiet Water Service--20 psid
- Maximum Differential Pressure Ratings (Close-off) (kPa)
- 1655 kPa; For Quiet Water Service--138 kPa
- Capacity (Cv)
- 0.73 Cv
- Capacity (Kv)
- 0.63 kvs
- Valve Action
- Stem down to close
- Valve Type
- Globe Valve
- Controlled Fluid
- Chilled or hot water with up to 50% Glycol. Not for use with steam or fuels.
- Materials (Body)
- Red Brass
- Materials (Seat)
- Stainless Steel
- Materials (Stem)
- Stainless Steel
- Materials (Cartridge)
- Brass
- Flow Characteristic
- Equal Percentage
- Actuation
- Must be purchased separately
- Static Pressure Rating (psi)
- Meets ANSI 150 Standard
- Static Pressure Rating (kPa)
- Meets ANSI 150 Standard
- ANSI/ASME Rating
- 150
- Stem Travel (in.)
- 3/4 in.
- Stem Travel (mm)
- 20 mm
- Bonnet Size (mm)
- 35 mm
- Materials (Plug/Ball/Disc)
- Brass
- Materials (Packing)
- Teflon
- Leakage
- Seat: 0.05% of Cv
- Approvals, CRN Number
- 0C0861.9087YTN/0C0861.99
