HOME  | SUPPLIER DIRECTORY | DIXON VALVE, COUPLING CO | DIXON VALVE & COUPLING SECTIONS | Accessiors | Safety Clip


Product Data

KSCdirect Part #: DIX AC1
Description: AC1 DIXON SAFETY CLIP
MFG Part #: AC1
UPC:
Supplier: DIXON VALVE & COUPLING CO
In Stock - Available for immediate shipment.

Your Price: $0.17 / EA

QTY :
For shipping rates, add item to cart.
* Quantity discounts may be available. Call 800-918-8939.
Alternatively, you may e-mail info@kscdirect.com for service.


AC1 DIXON SAFETY CLIP

Part Name Manufacturer
"Air King" Accessories Dixon

Standard Safety Clips
Stainless Steel Clips
Lanyards
Washers
Part#
Part#
Part#
Description
Part#
AC1
AC7
ACL8
Rubber
AWR4
. Same Size for all Coupling Sizes. .Same Size for all Coupling Sizes.
Neoprene
AWS6
"Air King" Safety Pins.
.Synthetic cord. .Same Size for all Coupling Sizes.
Wire Diameter
Part#
Part#
.Rubber temp. range: -20 F to 160 F.
0.058
AKSP1
LR7
.Neoprene temp. range: -20 F to 190 F.
0.091
AKSP25
.Stainless Steel cable. .Neoprene is oil resistant.

Safety Alert "AIR KING" IS FOR AIR AND WATER SERVICE ONLY
WARNING: NEVER USE ANY "AIR KING" COUPLING FOR STEAM SERVICE!
None of Dixon's catalog information is to be interpreted to mean that this type of coupling is suitable for use on steam hose.
The use of an "Air King" Safety Clip or wire type retainer is necessary to assure "Air King" Universal Couplings will not become accidentally disconnected. This guarantees the fittings are properly connected as pin will not go through holes in mating flanges until couplings are locked in place. Only one "Air King" Safety Clip or wire type retainer is required for each "Air King" Universal Coupling.



Keywords: Dixon Valve, Clamps, Valves, Coupling, Couplings



Category:
[0] => HYDRAULICS & PNEUMATICS => PNEUMATICS => AIR FITTINGS AND ACCESSORIES => ACCESSORIES
[1] => SUPPLIER DIRECTORY => DIXON VALVE, COUPLING CO => DIXON VALVE & COUPLING SECTIONS => DIXON VALVE,VALVES, COUPLING, COUPLINGS SECTION 160 => HYDRAULICS & PNEUMATICS => PNEUMATICS => AIR FITTINGS AND ACCESSORIES => ACCESSORIES

Kelly Legacy Part Number: 2291258



Catalog sheet:
Air King Global 
GLOBAL AIR KING
Male N.P.T. Ends Ferrules
Dixon Global Air King
HOSE COUPLING SAFETY
Investment Cast Steel Zinc Plated Carbon Steel
Use Dixon couplings, retention
devices and accessory products only
Global Air King couplings are recommended for use on air Offers a low profile streamline appearance with maximum retention.
Lightweight
for their intended service. Size Part # List Price
lines for pneumatic equipment. Can be crimped or swaged
All recommendations of the Hose 1/2" GAM2 $2.90
3/4" GAM7 2.95
Manufacturer, and the Coupling 1" GAM12 3.70 Size Ferrule I.D. Part # List Price
Manufacturer, must be employed with
1/2" 0.906 CCF0906 $0.90
regards to Size, Temperature, CCF1120 1.40
1.120
Application, Media, and Pressure
Female N.P.T. Ends 1.149 CCF1149 1.40
when selecting the components for a 3/4" 1.190 CCF1190 1.40
hose assembly. Investment Cast Steel 1.218 CCF1218 1.40
1.246 CCF1246 1.40
All finished hose assemblies
Size Part # List Price 1.438 CCF1438 2.00
should be tested in accordance with 1" CCF1469 2.00
1/2" GAM3 $2.90 1.469
the Rubber Manufacturers Association 1.500 CCF1500 2.00
3/4" GAM8 2.95
recommendations. 1" GAM13 3.70 1.531 CCF1531 2.00

All hose assemblies should be
See page 5 for crimp recommendations.
thoroughly inspected prior to each
use to ensure they are undamaged, Hose Ends
and properly coupled. Investment Cast Steel

Use safety clips on couplings, and Washers
King Safety Cables on assemblies
Size Part # List Price
Features: where required by the manufacturer,
1/2" GAM1 $2.75 Same size for all coupling sizes
The maximum recommended working pressure for Dixon Air King universal as well as State and Federal
3/4" GAM6 2.80 Rubber temperature range: -20F to 160F
couplings is up to 150 PSI at ambient temperature (70F). Recommendations regulations. (OSHA regulations may 1" GAM11 3.55 Neoprene temperature range: -20F to 190F
are based on the standard Natural Rubber Washer, AWR4. Neoprene is oil resistant
be viewed in full on the OSHA
website, www.osha.gov.) See page 4 for ferrules.
Connection:
Connections are made by pushing two Dixon Air King heads together and rotating Under no circumstances should the Natural Rubber Neoprene
List Price List Price
them a quarter turn. When the fittings are properly connected an Air King safety Part # Part #
assembly working pressure or
clip will pass through at least one set of holes. Always use an Air King safety clip,
working temperature exceed the Blank End AWR4 $0.45 AWS6 $0.60
cotter pin, or wire to ensure the couplings are properly connected and to keep the
working pressure or working Investment Cast Steel
couplings from being accidentally disconnected.
temperature of the lowest rated
component (coupling, clamp, ferrule, Size Part # List Price
Safety Clip
Disconnection:
Remove the safety clip, cotter pin or wire. Press the heads firmly together and turn or hose). --- GAM0 $4.00
them counterclockwise. The heads will then separate. NEVER attempt to
Call Dixon (800.355.1991) for
disconnect any hose while pressure is in the line.
advice on couplings, retention Same size for all coupling sizes

Interchange: devices, and accessories for your Triple Connection Sold only in bags of 25

Although Dixon Air King couplings may interchange with other manufacturers' application. Investment Cast Steel
fittings, we do not recommend their use with other products. Not all locking Wire Dia. Part # List Price
heads are made to the same standards as Dixon Air King. Use with other brands .080 AC1 $0.25
Size Part # List Price
of fittings may create an unsafe condition, due to poor design or worn equipment.
--- GAM10 $6.05



2 Dixon 1-877-963-4966 Dixon 1-877-963-4966 3 Dixon 1-877-963-4966 4
Air King Global
GLOBAL AIR KING
Male N.P.T. Ends Ferrules
Dixon Global Air King
HOSE COUPLING SAFETY
Investment Cast Steel Zinc Plated Carbon Steel
Use Dixon couplings, retention
devices and accessory products only
Global Air King couplings are recommended for use on air Offers a low profile streamline appearance with maximum retention.
Lightweight
for their intended service. Size Part # List Price
lines for pneumatic equipment. Can be crimped or swaged
All recommendations of the Hose 1/2" GAM2 $2.90
3/4" GAM7 2.95
Manufacturer, and the Coupling 1" GAM12 3.70 Size Ferrule I.D. Part # List Price
Manufacturer, must be employed with
1/2" 0.906 CCF0906 $0.90
regards to Size, Temperature, CCF1120 1.40
1.120
Application, Media, and Pressure
Female N.P.T. Ends 1.149 CCF1149 1.40
when selecting the components for a 3/4" 1.190 CCF1190 1.40
hose assembly. Investment Cast Steel 1.218 CCF1218 1.40
1.246 CCF1246 1.40
All finished hose assemblies
Size Part # List Price 1.438 CCF1438 2.00
should be tested in accordance with 1" CCF1469 2.00
1/2" GAM3 $2.90 1.469
the Rubber Manufacturers Association 1.500 CCF1500 2.00
3/4" GAM8 2.95
recommendations. 1" GAM13 3.70 1.531 CCF1531 2.00

All hose assemblies should be
See page 5 for crimp recommendations.
thoroughly inspected prior to each
use to ensure they are undamaged, Hose Ends
and properly coupled. Investment Cast Steel

Use safety clips on couplings, and Washers
King Safety Cables on assemblies
Size Part # List Price
Features: where required by the manufacturer,
The maximum recommended working pressure for Dixon Air King universal 1/2" GAM1 $2.75 Same size for all coupling sizes
as well as State and Federal
couplings is up to 150 PSI at ambient temperature (70F). Recommendations 3/4" GAM6 2.80 Rubber temperature range: -20F to 160F
regulations. (OSHA regulations may 1" GAM11 3.55 Neoprene temperature range: -20F to 190F
are based on the standard Natural Rubber Washer, AWR4.
be viewed in full on the OSHA Neoprene is oil resistant

Connection: website, www.osha.gov.) See page 4 for ferrules.
Connections are made by pushing two Dixon Air King heads together and rotating Natural Rubber Neoprene
Under no circumstances should the List Price List Price
them a quarter turn. When the fittings are properly connected an Air King safety Part # Part #
assembly working pressure or
Blank End
clip will pass through at least one set of holes. Always use an Air King safety clip, AWR4 $0.45 AWS6 $0.60
cotter pin, or wire to ensure the couplings are properly connected and to keep the working temperature exceed the
couplings from being accidentally disconnected. working pressure or working Investment Cast Steel
temperature of the lowest rated
Disconnection: component (coupling, clamp, ferrule, Size Part # List Price
Remove the safety clip, cotter pin or wire. Press the heads firmly together and turn or hose). --- GAM0 $4.00
Safety Clip
them counterclockwise. The heads will then separate. NEVER attempt to
disconnect any hose while pressure is in the line. Call Dixon (800.355.1991) for
advice on couplings, retention Same size for all coupling sizes
Interchange: devices, and accessories for your Triple Connection Sold only in bags of 25

Although Dixon Air King couplings may interchange with other manufacturers' application. Investment Cast Steel
fittings, we do not recommend their use with other products. Not all locking Wire Dia. Part # List Price
heads are made to the same standards as Dixon Air King. Use with other brands
Size Part # List Price .080 AC1 $0.25
of fittings may create an unsafe condition, due to poor design or worn equipment.
--- GAM10 $6.05



2 Dixon 1-877-963-4966 Dixon 1-877-963-4966 3 Dixon 1-877-963-4966 4
Air King Global
GLOBAL AIR KING
Male N.P.T. Ends Ferrules
Dixon Global Air King
HOSE COUPLING SAFETY
Investment Cast Steel Zinc Plated Carbon Steel
Use Dixon couplings, retention
devices and accessory products only
Global Air King couplings are recommended for use on air Offers a low profile streamline appearance with maximum retention.
Lightweight
for their intended service. Size Part # List Price
lines for pneumatic equipment. Can be crimped or swaged
All recommendations of the Hose 1/2" GAM2 $2.90
3/4" GAM7 2.95
Manufacturer, and the Coupling 1" GAM12 3.70 Size Ferrule I.D. Part # List Price
Manufacturer, must be employed with
1/2" 0.906 CCF0906 $0.90
regards to Size, Temperature, CCF1120 1.40
1.120
Application, Media, and Pressure
Female N.P.T. Ends 1.149 CCF1149 1.40
when selecting the components for a 3/4" 1.190 CCF1190 1.40
hose assembly. Investment Cast Steel 1.218 CCF1218 1.40
1.246 CCF1246 1.40
All finished hose assemblies
Size Part # List Price 1.438 CCF1438 2.00
should be tested in accordance with 1" CCF1469 2.00
1/2" GAM3 $2.90 1.469
the Rubber Manufacturers Association 1.500 CCF1500 2.00
3/4" GAM8 2.95
recommendations. 1" GAM13 3.70 1.531 CCF1531 2.00

All hose assemblies should be
See page 5 for crimp recommendations.
thoroughly inspected prior to each
use to ensure they are undamaged, Hose Ends
and properly coupled. Investment Cast Steel

Use safety clips on couplings, and Washers
King Safety Cables on assemblies
Size Part # List Price
Features: where required by the manufacturer,
The maximum recommended working pressure for Dixon Air King universal 1/2" GAM1 $2.75 Same size for all coupling sizes
as well as State and Federal
couplings is up to 150 PSI at ambient temperature (70F). Recommendations 3/4" GAM6 2.80 Rubber temperature range: -20F to 160F
regulations. (OSHA regulations may 1" GAM11 3.55 Neoprene temperature range: -20F to 190F
are based on the standard Natural Rubber Washer, AWR4.
be viewed in full on the OSHA Neoprene is oil resistant

Connection: website, www.osha.gov.) See page 4 for ferrules.
Connections are made by pushing two Dixon Air King heads together and rotating Natural Rubber Neoprene
Under no circumstances should the List Price List Price
them a quarter turn. When the fittings are properly connected an Air King safety Part # Part #
assembly working pressure or
Blank End
clip will pass through at least one set of holes. Always use an Air King safety clip, AWR4 $0.45 AWS6 $0.60
cotter pin, or wire to ensure the couplings are properly connected and to keep the working temperature exceed the
couplings from being accidentally disconnected. working pressure or working Investment Cast Steel
temperature of the lowest rated
Disconnection: component (coupling, clamp, ferrule, Size Part # List Price
Remove the safety clip, cotter pin or wire. Press the heads firmly together and turn or hose). --- GAM0 $4.00
Safety Clip
them counterclockwise. The heads will then separate. NEVER attempt to
disconnect any hose while pressure is in the line. Call Dixon (800.355.1991) for
advice on couplings, retention Same size for all coupling sizes
Interchange: devices, and accessories for your Triple Connection Sold only in bags of 25

Although Dixon Air King couplings may interchange with other manufacturers' application. Investment Cast Steel
fittings, we do not recommend their use with other products. Not all locking Wire Dia. Part # List Price
heads are made to the same standards as Dixon Air King. Use with other brands
Size Part # List Price .080 AC1 $0.25
of fittings may create an unsafe condition, due to poor design or worn equipment.
--- GAM10 $6.05



2 Dixon 1-877-963-4966 Dixon 1-877-963-4966 3 Dixon 1-877-963-4966 4
Outside Air Applications
AIR KING
Blank Ends
Blank End fittings have no outlet and are used to block the
line at any coupling point.
2-1/2"
The end opposite the coupling head is flat, with an eye for
a chain to secure the fitting when not in use.
Available in malleable iron, brass and 316 stainless steel.


Malleable Iron Brass 316
Stainless Steel
pkg pkg
Part # qty Part # qty Part #
2-1/2"
AM0 25 AB0 25 RAM0



5/16"




5/16"
Triple Connections
Triple connection consists of three universal
couplings that provide an extra outlet when
connected to the line.
Available in malleable iron or brass. 120
3-3/4"


Malleable Iron Brass
pkg pkg
Part # qty Part # qty
AM10 25 AB10 25

4-9/32"




Air King Safety Pins, Clips, Lanyards and Washers
The use of an Air King Safety Clip or wire type retainer is necessary to ensure the couplings will not become accidentally disconnected.
The clip will not go through the locking holes unless the couplings are locked in place. Only one Safety Clip or wire type retainer is
required for each assembly.

Standard Safety Clips Air King Safety Pins

Wire Diameter Part # Wire Diameter Part #
Same size for all coupling .080 AC1 .058 AKSP1 Heavy duty
sizes .091 AKSP25 Oversized
Sold only in bags of 25

Lanyards Same size for all coupling Stainless Steel Clips
sizes
Stainless steel cable Synthetic cord
Sold only in bags of 25 Sold only in bags of 25 Wire Diameter Part #
.072 AC7
Part # Part #
Same size for all coupling
LR7 ACL8
sizes

Rubber temperature range: -20F to 160F Washers
Neoprene temperature range: -20F to 190F Description Part #
Neoprene is oil resistant Rubber AWR4
Same size for all coupling sizes Neoprene AWS6
Sold only in bags of 50
Dixon Valve & Coupling Company, 800-355-1991 9